Deltana PPH3520 Push Plate 20" for 10" Door Pull

The PPH3520 is the 20 inch plate made for Deltana's 10 inch door pull, and it mates with the DP2578 (pull with rosette) or the DP2575 (pull without rosette). If you are running a different pull size, this plate is not the match.

It is a backing plate for a pull, not a blank push plate. The PPH3520 is prepped to carry Deltana's 10 inch pull, so the pull mounts through the plate rather than directly to the door. For a flat plate with no pull, look at a standard push plate instead, such as the Delaney 3-1/2 x 15 inch or 4 x 16 inch push plates.

Deltana lists the PPH3520 as commercial, and it is solid brass at a 1.2mm plate gauge. That is a decorative-grade brass plate rather than a through-bolted heavy duty unit. For a high abuse opening where the pull needs to be through bolted into the door, the Ives 8302 heavy duty pull plate with through bolt mounting is the different animal to look at.

The Deltana PPH3520 is a 20 inch push plate in solid brass, meant for the push side of the door as an accessory behind Deltana's 10 inch door pulls. The Ives 8303 is a heavy duty pull plate with 8 inch or 10 inch center-to-center pull mounting, so the pull is part of the plate assembly rather than ordered separately. If you need the grasping hardware and the plate as one item, that is the pull plate; if you are backing an existing Deltana pull, the PPH3520 is the matching plate.

The PPH3520 is a plain 20 inch push plate paired with Deltana's large door pulls and is not prepped for exit hardware. For an exit device application, the Detex P/PN Series pull plate is made for Detex Value Series exit devices.

Each plate ships individually poly bagged with its mounting hardware included, sold one per unit. You still order the 10 inch pull (DP2575 or DP2578) separately, since the plate is an accessory to it.

Seven finishes: PVD Polished Brass, Polished Brass, Antique Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel and Polished Chrome. PVD Polished Brass is the one to specify if the door sees weather or heavy hand traffic and you want the brass tone to hold.

No. The PPH3520 is an accessory to Deltana's large door pulls and is drilled for the 10 inch pull, so used bare it would show mounting holes. Use a solid push plate for the push side, for example the Delaney 4 x 16 inch push plate or Emtek's Modern or Knoxville push and pull plate sets if you want a matched decorative pair.

The plate is 20 inches on its long dimension, so the stile or flat face of the door has to be tall and wide enough to take it clear of glass stops and the lock case. On narrow aluminum storefront stiles, a shorter plate is the safer choice, such as the Delaney 3-1/2 x 15 inch pull plate.

They are different programs. Emtek sells push and pull plates as decorative series - Knoxville, Modern, and the lost wax cast bronze Petal - where the plate and its styling are the product. The Deltana PPH3520 is a 20 inch plate specifically dimensioned as an accessory for Deltana's DP2578 pull with rosette or DP2575 pull without rosette, so it is selected to match those pulls rather than as a standalone decorative set.

Delaney pairs plates by size: a 3-1/2 inch by 15 inch push plate with a matching 3-1/2 inch by 15 inch pull plate, and a 4 inch by 16 inch push plate with a matching 4 inch by 16 inch pull plate. Emtek also sells push and pull plates together within a single series such as Knoxville or Modern. With the Deltana PPH3520 you combine the 20 inch brass push plate with Deltana's DP2578 or DP2575 pull to build the set, and the plate comes in seven finishes including oil rubbed bronze, brushed nickel, polished chrome and polished brass.

Yes, as long as you order the plate and pull in the same Deltana finish. All seven finishes on the PPH3520 are Deltana's standard offerings, so a DP2575 or DP2578 pull ordered in Oil Rubbed Bronze, Antique Brass or Polished Chrome will read the same as the plate behind it since both are solid brass base metal.