Deltana DSF3225 Floor Mount, Bumper Door Stop, Heavy-Duty, Solid Brass

The DSF3225 is a floor-mounted bumper stop in solid brass. It anchors to the floor behind the door and takes the impact on a bumper, so the swing stops before the lever or the door face hits the wall. It's a stop only, not a holder, so it won't hold the door open once it's stopped it. If you need the door to stay open, look at a holder type such as the Orca Hardware 22HD Series goose neck, which is listed as a door holder.

Commercial. The DSF3225 is a heavy-duty solid brass floor bumper, and heavy duty in a floor stop means the body takes repeated door strikes without deforming, which is what a multi-family corridor or an office suite door does hundreds of times a week. For a property manager standardizing on one stop across a building, this is the class of part to spec rather than a light residential dome.

Yes. Each DSF3225 ships in an individual poly bag with wood mounting hardware included, sold one per unit. Wood screws mean it's set up out of the box for a wood subfloor. Concrete, tile over slab, or a poured floor needs anchors you supply, so add masonry anchors to the order if that's what you're fastening into.

Floor stops like the DSF3225 need the bumper to sit high enough to catch the door's bottom rail, so undercut doors over carpet are where they can miss. Where the door-to-floor clearance is unusual, the Ives FS40 / FS41 / FS42 / FS43 automatic floor stop and holder is built with adjustable door-to-floor clearance and is the better fit. On a normal slab or hard floor with typical undercut, the Deltana bumper mounts directly and catches the door face.

The Deltana DSF3225 is a bumper stop: it arrests the door swing and protects the wall, but it does not hold the leaf open. For hold-open duty, the Ives FS40 / FS41 / FS42 / FS43 is an automatic floor stop and holder with adjustable door-to-floor clearance, the SOSS MDH is a magnetic door holder and stop measuring 3-5/16 inch by 1-3/4 inch, and the Orca 22HD Series is listed with a door holder function. Ordering a bumper when the specification calls for hold-open is the most common mis-substitution in this group.

The Deltana DSF3225 is a heavy-duty solid brass floor mounted bumper stop. The Ives FS13 is a heavy-duty brass floor dome stop with a replaceable rubber bumper, and the Ives FS17 is a heavy-duty brass floor dome stop with a rubber bumper. All three are brass floor stops at a heavy duty level, so the FS13 and FS17 are the direct cross-brand equivalents. The FS13 differs in that its bumper is replaceable, which lets a maintenance crew renew the strike surface without pulling the base off the floor.

A floor bumper such as the Deltana DSF3225 sits at the floor and catches the door at its lower edge, which requires the stop to be placed where the door leaf will reach it. When the mounting point has to be set back from the door, a gooseneck reaches up and out to meet the leaf: the Orca Hardware 22HD Series goose neck floor stop with black tip functions as a door holder for 1-3/8 inch or 1-3/4 inch doors, and the Emtek 2253 and Delaney 40118X are goose style and gooseneck floor stops respectively. The gooseneck profile stands taller off the floor than a bumper, so confirm the walking path before specifying one in a corridor.

Nine finishes: PVD Polished Brass, Polished Brass, Antique Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, and Paint Black. If you're matching existing hardware on a building, PVD Polished Brass is the one to pick over standard Polished Brass where the stop sees moisture or frequent cleaning, since PVD is a coated finish rather than a lacquered one. Paint Black is the option that disappears against dark flooring.

A bumper stop like the Deltana DSF3225 sits low on the floor and stops the door on its face or bottom rail. A gooseneck rises on a curved post to meet the door higher up, which is what you want when the door has a kickplate, a heavy bottom rail, or when a low profile stop would get kicked. ZenSupply carries goosenecks including the Emtek 2253 Goose Style and the Delaney Gooseneck floor door stop. Low-profile bumpers are less of a trip hazard in a corridor; goosenecks contact the door where the low stop can't reach.

Both are heavy-duty brass floor stops, so functionally the DSF3225 does the same job as the Ives FS13 or FS17 dome stops. What doesn't carry over is the hole pattern: the Deltana ships with its own wood mounting hardware and there's no stated shared footprint, so plan on drilling fresh. One practical difference worth knowing, the Ives FS13 is listed with a replaceable rubber bumper, which matters if you maintain a fleet of doors and want to swap tips rather than whole stops.

The Deltana DSF3225 is a heavy-duty solid brass floor mounted bumper. Where the concern is a trip hazard or a vacuum path, the Orca Hardware 23LP Series is a dome floor stop in a low rise profile with a gray tip, and the Emtek 2251 is a half dome door stop. Both use a dome form that presents less height above the finished floor than a full bumper body. The Orca 23LP is a door stop only, so it will not hold the leaf open.

The Deltana DSF3225 is a heavy-duty solid brass floor bumper suited to commercial openings. Where the opening is subject to deliberate abuse, the Ives FS18S/FS18L is a heavy-duty security floor stop, built for that condition rather than for general commercial traffic. The Ives FS13 and FS17 are heavy-duty brass floor dome stops and sit alongside the Deltana as conventional commercial stops, not as security-rated substitutes for the FS18 series.

The Deltana DSF3225 floor bumper is offered in nine finishes: PVD polished brass, polished brass, antique brass, oil rubbed bronze, brushed nickel, antique nickel, polished chrome, brushed chrome, and paint black. That spread covers the common brass, nickel, chrome and bronze families in one part number, which matters when a property manager is standardizing stops across a building to match existing lever and hinge finishes. The Emtek 2254 floor door bumper is a comparable bumper at 1-3/8 inch by 1-1/4 inch, and the Emtek 2257 is a 1-1/2 inch cylindrical floor bumper.

The DSF3225 is solid brass through the body, which is what gives a heavy-duty floor stop its resistance to being crushed or bent by a door driven hard into it. Brass also won't rust in an entry vestibule or a wet corridor. Where the concern is deliberate abuse or someone kicking the stop off the floor, the Ives FS18S/FS18L security floor stop is the heavy-duty type built specifically for that condition.

One. The DSF3225 is sold each, packed individually in a poly bag with its wood mounting hardware, and the unit price is per stop. If you're doing a floor of apartments or a corridor of offices, count openings and order that quantity, since there's no multi-pack on this model.

Two comparable floor bumpers state their dimensions directly: the Emtek 2254 floor door bumper at 1-3/8 inch by 1-1/4 inch, and the Emtek 2257 cylindrical floor bumper at 1-1/2 inch. The SOSS MDH magnetic door holder and stop measures 3-5/16 inch by 1-3/4 inch, a noticeably larger footprint because it carries a holder magnet as well as a stop face. The Deltana DSF3225 is a solid brass floor bumper; take its footprint from the manufacturer spec sheet before laying out a tight threshold.

Both stop the door at the floor, but the body shape differs. The Deltana DSF3225 is a floor mounted bumper in solid brass. A dome stop presents a rounded low body: the Delaney 40260X is a dome stop, the Emtek 2251 is a half dome door stop, and the Ives FS13 and FS17 are brass floor dome stops. The practical difference is the strike height and how far the stop projects into the room, so measure where the door leaf lands before swapping a bumper for a dome or the reverse.