Deltana DSH45 Single Action Sp...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$27.80
$16.54
Deltana Deltana DSH45 Single Action Spring Hinge 4-1/2" x 4-1/2" x 5/8" Square Corner, Steel, UL Listed DEL-DSH45

Deltana DSH45 Single Action Spring Hinge 4-1/2" x 4-1/2" x 5/8" Square Corner, Steel, UL Listed

(No reviews yet) Write a Review

Model: DSH45U4
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$27.80
$16.54
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Deltana 4-1/2" x 4-1/2" Spring Hinge, UL Listed
Deltana self-closing spring hinges are adjustable and built for both functionality and style. These Deltana hinges come in an array of fine finishes and are designed to provide reliable door control in residential and commercial applications.

Each hinge is UL Listed for added safety assurance, making it an ideal choice where certified self-closing performance is required. Whether you're shopping for Deltana spring hinge models for new installations or upgrades, this hinge offers long-lasting durability and smooth operation.

U/M (Unit of Measure): each (Price displayed is per unit)
Wood Screw: #12 x 1-1/4"
Machine Screw: #12 x 1/2"
Thickness: 0.134
Options: UL Listed

Manufacturer Resources:

Manufacturer Resources

Spec Sheet

Product Specs

Subcategory:
Hinges and Pivots
Corner Style:
Square Corners
Product Group:
Door Hinges and Pivots
Product Type:
Spring Hinges
Product Subgroup:
Spring Hinges
Commercial/Residential:
Commercial
Bearing Type:
Plain Bearing
Non-Removable Pin (NRP):
No
Certifications:
UL Listed
Hinge Type:
Spring
Product Options:
UL Listed
MAP Policy:
Yes
Tags:
deltana spring hinge, deltana spring hinges, deltana hinges
Product Model:
DSH45
Product Function:
Spring Hinges
Product Size:
4.5" x 4.5"
Product Dimension:
4-1/2" x 4-1/2"
Product Material:
Steel
Product Category:
Door Trim & Accessories
Product Substrate:
Steel
Department:
Door Hardware

Deltana DSH45U4 – Frequently Asked Questions

1) Will a Deltana DSH45 spring hinge drop into an existing 4-1/2 inch hinge mortise?
It drops in if the existing prep is square cut. The DSH45 is a 4-1/2 by 4-1/2 inch spring hinge with square corners and a stated thickness of 0.134 inch, so it seats in a standard 4-1/2 inch square corner mortise in both the door and the jamb. Pull one of the old hinges and look at the leaf corners first: sharp corners mean square prep and this is a direct swap, rounded corners mean the mortise was machine routed and a square corner hinge will not sit flush without chisel work.
2) My doors take 4 inch or 3-1/2 inch hinges. Is there a square corner spring hinge in those sizes?
The Deltana DSH45 is only 4-1/2 by 4-1/2 inch, so it will not cover a smaller prep. For a 4 by 4 inch square corner opening, the Orca Hardware 4040 Series square corner spring hinge is the size match. For a 3-1/2 by 3-1/2 inch prep, which is what most residential interior doors carry, the Emtek 95013 is a square corner spring hinge in plated steel and it is UL Listed. Staying with 4-1/2 inch square corner and wanting another brand, the McKinney 1502 is the same 4-1/2 by 4-1/2 inch square corner spring hinge.
3) The spec calls for UL Listed self-closing hinges. Does the Deltana DSH45 meet that?
UL Listed, and the DSH45 is a commercial rated hinge, so it answers a spec written for UL Listed self-closing spring hinges at 4-1/2 by 4-1/2 inch square corner. It is a single action hinge, meaning it closes the door in one swing direction rather than working both ways. If the opening needs a smaller UL Listed spring hinge, the Emtek 95013 carries the same listing at 3-1/2 by 3-1/2 inch, and Design Hardware also builds a UL spring hinge.
4) The hinge pockets in my door and frame have rounded corners. What spring hinge should I use instead of the DSH45?
A square corner hinge will not seat cleanly in a radiused pocket, and the DSH45 is a square corner hinge. Match the radius already routed into the jamb instead. The Hager 1251 is a full mortise spring hinge with 1/4 inch round corners in standard weight steel, and the Hager 1252 is the same hinge with 5/8 inch round corners. The BEST RD2060R is a radius corner plain bearing spring hinge in standard weight with a removable pin. Measure the corner radius on the existing hinge before ordering, since 1/4 inch and 5/8 inch are not interchangeable.
5) What is the closest cross-brand equivalent to the Deltana DSH45 spring hinge?
The McKinney 1502 is the nearest match on prep. It is a square corner full mortise spring hinge in 4-1/2 by 4-1/2, rated medium duty, which is the same leaf size and the same square corner style the DSH45 uses. The DSH45 is a steel single action spring hinge with a plain bearing and a UL listing. Both sit in a standard 4-1/2 inch square corner mortise, so an existing pocket cut for one takes the other without rework, and the decision comes down to finish and whether the opening calls for the UL listing.
6) I need a self-closing hinge with no visible barrel on the door edge. What replaces a Deltana DSH45?
The DSH45 is a full-size butt hinge with a visible knuckle, offered in finishes such as Oil Rubbed Bronze and Polished Chrome so the barrel reads as trim. Where nothing should show, the SOSS invisible spring closer hinges do the same self-closing job concealed: the 216IC carries a 20 minute fire rating, the 218IC is a 7 inch heavy duty unit requiring a 1-3/4 inch minimum door thickness, and the 220IC is a 7 inch heavy duty unit with a 20 minute fire rating and a 2 inch minimum door thickness. These mortise into the door and jamb edges, so the prep is routed pockets, not butt hinge cutouts.
7) The DSH45 is steel. What spring hinge do I use on a pool deck or coastal exterior door?
Read the finish and the base metal separately. The DSH45 is a steel hinge, and its Brushed Stainless option is a finish on that steel body, not stainless construction. Where salt air or chemical exposure is the concern, the Hager 1150 is a full mortise spring hinge in standard weight stainless steel, rated medium duty. Among the continuous options, the Pemko Markar FS902 is built in 304 stainless. For dry interior commercial openings the steel hinges hold up fine, and the Hager 1250 is the standard weight steel full mortise counterpart.
8) Will spring hinges close and latch the door on their own, or do I still need a door closer?
Spring hinges do the closing themselves. The Deltana DSH45 is self closing and the spring tension is adjustable, so you set the force at install: wind it up when the door stalls short of the latch or drags on weatherstrip, back it off when the door slams. That adjustability is the reason these get used in place of a surface closer on apartment entries and back of house doors where nobody wants an arm hanging off the head. On a heavy or very wide door, a closer is still the more controllable answer.
9) What screws do Deltana DSH45 spring hinges take for a hollow metal frame versus a wood jamb?
Two fastener sizes cover both conditions. The DSH45 uses a #12 by 1-1/4 inch wood screw into a wood door or wood jamb, and a #12 by 1/2 inch machine screw into a tapped hollow metal frame. If the metal frame was never tapped for hinges, that is a drill and tap job before the hinge goes on, not something the hinge solves.
10) Is the Deltana DSH45 sold as a single hinge or as a pair?
Unit of measure is each, one hinge per unit. Count your openings before ordering: a door running two spring hinges needs two units, and a three hinge door being converted throughout needs three. Common practice on a standard door is to hang it on spring hinges in the same count as the hinges coming off it.
11) Are these steel spring hinges alright for an exterior door in a coastal or wash down location?
The DSH45 is steel, so the corrosion resistance comes from the plating or paint on it rather than the base metal. On a salt air entry or a door that gets hosed down, the Hager 1150 is a full mortise spring hinge built in stainless steel and is the better base material for that exposure. Indoors and on protected exteriors, the steel DSH45 is the normal choice, and the Brushed Stainless finish is a look rather than a change in base metal.
12) Do Deltana DSH45 spring hinges have a non-removable pin for an out-swinging exterior door?
No, NRP is not part of the DSH45. On an out-swing exterior door the knuckle sits on the outside, so an unsecured pin is reachable from the wrong side of the door. That is worth weighing on ground floor exterior openings; on in-swing doors and interior openings the pin is on the protected side and it is a non-issue.
13) Is there a self-closing hinge that stays hidden when the door is shut, instead of a spring hinge you can see?
A mortise spring hinge like the Deltana DSH45 shows knuckles on the door edge, same as any butt hinge. For a concealed look, SOSS invisible spring closer hinges disappear when the door is closed: the 216IC and 220IC are heavy duty with a 20 minute fire rating, and the 218IC is a 7 inch heavy duty unit. Watch the door thickness on those, the 218IC needs at least 1-3/4 inches and the 220IC needs 2 inches, so a thin interior door rules them out and a spring hinge is the way back in.
14) Can I use a Pemko spring loaded continuous hinge in place of a pair of DSH45 spring hinges?
They are not the same class of hardware. The DSH45 is a single action butt hinge set into 4-1/2 inch pockets in the door and jamb. The Pemko Markar FM400 Series and FM900 Series and the Pemko FS402 Series and FS902 Series are spring loaded continuous hinges built for toilet partitions, each stated at 80 lb load capacity, and they run the leaf height of the door rather than sitting in two or three cutouts. Swapping one for the other means a different prep, different fasteners, and a partition-style application rather than a standard commercial door.
15) What finishes can I get Deltana DSH45 spring hinges in to match the rest of the doors in my building?
Eleven finishes cover the DSH45: Oil Rubbed Bronze, Antique Brass, Polished Brass, Brushed Brass, Antique Nickel, Brushed Nickel, Polished Chrome, Brushed Chrome, Brushed Stainless, Paint Black, and Prime Coat White. Prime Coat White is the one to order when the hinges get painted out with the door and frame, which is the usual call on a painted corridor or unit door. For a building already standardized on a lever or knob finish, order the hinge in the matching family rather than the closest look, since brass and nickel tones read differently side by side in a corridor.
16) Are Deltana DSH45 spring hinges ball bearing or plain bearing?
Plain bearing. The DSH45 is a steel hinge with a stated thickness of 0.134 inch, rated commercial, and the spring does the closing rather than a bearing carrying a high cycle count. That construction is normal for spring hinges across brands, the BEST 2060R is plain bearing as well. Where a door is genuinely heavy or sees constant traffic, the usual answer is ball bearing butt hinges plus a separate closer, and the spring hinge goes on the lighter openings.
17) Does the Deltana DSH45 have a removable pin like the BEST 2060R?
The BEST 2060R states a removable pin: it is a square corner standard weight plain bearing spring hinge, medium duty, and the radius corner version is the BEST RD2060R, also with a removable pin. The DSH45 is a plain bearing spring hinge and is not built as a non-removable-pin unit, so it behaves the same way in the field on that point. If a security review on an outswing opening calls for pin retention, that requirement is separate from the spring function and needs to be specified as such rather than assumed from the spring hinge model.
18) The old hinges have an offset screw pattern. Will a DSH45 line up on the existing holes?
Check the hole layout, not just the size and corner. The Orca Hardware SPR4058Z is a 4 by 4 hinge with a 5/8 inch radius corner in a Z hole pattern, while the SPR4058 in the same size and corner uses the standard pattern, so two hinges that measure identically can still land screws in different places. The DSH45 is a 4-1/2 by 4-1/2 square corner hinge taking #12 x 1-1/4 inch wood screws and #12 x 1/2 inch machine screws. On a retrofit, hold the old hinge against the new one before you pull the door.
How fast can I get the Deltana DSH45U4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Deltana DSH45U4 come with a warranty?
Absolutely. The Deltana DSH45U4 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Deltana DSH45U4?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Deltana DSH45U4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!