Deltana KR114 Knob Round Solid, Solid Brass, 1-1/4" Diameter

The KR114 is a 1-1/4 inch diameter round knob, which is the smaller end of the usual cabinet knob range. It works well on drawer fronts and upper doors where a larger knob would crowd the face. If you want more to grab on deep, heavy drawers, the Schaub 131 is a 1-1/2 inch round knob and the Schaub 1200 Modo is 16 mm, a much smaller modern profile.

Deltana classes the KR114 as residential. For apartments, condos, single family and light multi-family cabinetry it is the right part. For a commercial casework spec that calls out commercial-duty pulls, this is not the knob to put on the submittal.

A knob like the 1-1/4 inch KR114 takes a single hole and a single screw, so it is the simplest to install and the easiest to lay out, and it will not catch on clothing in a tight galley. A pull needs two holes drilled to a fixed center-to-center spacing, which is where retrofits go wrong. If you are replacing existing pulls, the Schaub 10030 and 10040 Cafe knobs are 1 inch oval knobs mounted on 7/8 inch center to center, so they use two holes and can bridge an existing two-hole drilling. A single-hole knob cannot.

If what is on the cabinet now is a single-hole knob, the KR114 goes into the same hole, since it is a one-screw round knob. The only thing to check is screw length against your door or drawer front thickness. If your current hardware is a two-hole pull, the KR114 will leave a second hole exposed and you need a two-hole knob or a pull on the same centers instead.

The Delaney Solid Brass Cabinet Knob is the closest like-for-like: another solid brass cabinet knob, matching the KR114's solid brass material. The KR114 itself is a 1-1/4 inch diameter round knob offered in ten finishes including PVD Polished Brass, Oil Rubbed Bronze, Polished Nickel, Brushed Nickel, Antique Nickel, Paint Black, Polished Chrome, Brushed Chrome, Polished Brass and Antique Brass. If a cabinet package was specced around brass knobs and the round profile is the requirement, Delaney covers the same material class; the finish match is what to confirm before ordering across brands.

Step up to the Schaub 131 Artifex, a 1-1/2 inch round cabinet knob. The Deltana KR114 is a 1-1/4 inch round knob, described by Deltana as a smaller profile knob, so on wide or tall drawer fronts where a small knob reads undersized the 1-1/2 inch Artifex gives the extra quarter inch of face. Both are round profiles, so the visual language of the run does not change - only the scale.

Not visually, and not always in the boring hole layout. The Schaub 10030 is a 1 inch Cafe Modern Oval Slot Cabinet Knob with 7/8 inch center to center, and the Schaub 10040 is a 1 inch Cafe Modern Oval Cabinet Knob, also 7/8 inch center to center. Those are two-hole oval knobs on a 7/8 inch spread, while the Deltana KR114 is a 1-1/4 inch round knob. If the doors are already drilled for a single center hole, an oval knob specified with a center to center dimension is a different drilling, and the face reads oval rather than round. Confirm the existing bore before treating them as interchangeable.

Solid brass, both the material and the substrate. That matters on a knob that gets grabbed thousands of times: there is no plating over a zinc core to wear through at the contact point, and the finish sits on brass. Deltana's PVD Polished Brass option is the one to pick if you want the brass look to hold up in a high-traffic kitchen or a rental turn.

Ten finishes: PVD Polished Brass, Polished Brass, Antique Brass, Oil Rubbed Bronze, Polished Nickel, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, and Paint Black. That spread is why the KR114 is a workable standardization choice across a building, you can match warm brass in one unit type and matte black or brushed nickel in another without changing knob profile or drilling pattern.

The KR114 is a plain traditional round profile in solid brass. For a styled alternative, Delaney Hardware also makes a solid brass cabinet knob in its Cabinet Knobs series. Emtek's Schaub Collection covers period and decorative looks: the Art Deco knob, the Allerton, the Astoria in glass, and the Emtek SELECT 8665. Orca Hardware runs a craftsman direction with the CK-18032 Mission round knob and the CK-19032 Whistler. All are single-purpose cabinet knobs, so the swap is a look decision, not a fit one.

No. The KR114 is a cabinet knob, a solid brass pull-style knob that mounts on a single screw. It has no latch, no spindle, and no rose, so it cannot operate a door latch. Use it on cabinet doors, drawers, and casework only.

The Deltana KR114 is a residential solid brass round knob at 1-1/4 inch diameter, carried in ten finishes from PVD Polished Brass through Oil Rubbed Bronze, Polished Chrome and Paint Black, which is what makes it workable as a fleet standard across mixed unit finishes. On the Orca side, the CK-18032 Mission Round Cabinet Knob is the round-face counterpart and the CK-19032 Whistler Cabinet Knob is the other collection option. For a property manager matching what is already on the other units, the decision is usually round face plus finish family, so hold the KR114 profile and match finish rather than switching collections mid-building.

Per knob. Deltana sells the KR114 by the each, so a 40 door and drawer kitchen means 40 pieces on the order, not 10 packs of four. Count your openings before you order, and remember drawers often take two knobs on wide fronts.

KR114 is Deltana's model designation for the 1-1/4 inch solid brass round knob. Order it as KR114 plus the finish code, since finish is the only variable on the part, ten of them from PVD Polished Brass through Paint Black.

They are identified differently at the catalog level. The KR114 is Deltana model KR114, a solid brass round knob at 1-1/4 inch diameter sold each. The Emtek 8665 belongs to the Emtek SELECT series and is a Schaub Collection cabinet knob/pull. For a distributor cross-referencing an order, the KR114 is ordered by model plus finish across its ten finish options, while the 8665 is ordered against the SELECT series designation - the part numbers do not map one to one, so confirm the diameter and finish separately rather than assuming a series equivalent.