Deltana PCT300 Wire Pull, Traditional, 3"

Deltana lists the PCT300 at 3 inches as the pull's length. That is the figure the model number carries (PCT300), so treat it as the pull size rather than a confirmed hole spacing. If you are matching into existing drilled holes, measure your current center-to-center and compare against the mounting spacing on the Deltana spec sheet before you drill.

Deltana classes the PCT300 as residential cabinet hardware. It's fine for apartment kitchens, bath vanities, and unit turns where the look matters. For a commercial break room or heavy-traffic institutional casework where pulls get yanked daily, a steel bar pull like the Orca Hardware CK-12001 T-Pull is the heavier-duty direction.

Step up to the Trimco 562 Series, which comes in 3-1/2 inch, 4 inch and 96mm center to center, or the Omnia 1968/102 modern cabinet pull at 4 inch center to center in forged solid brass. For an appliance front, the Schaub 79-8 Steamworks is an 8 inch appliance pull. The Deltana PCT300 stays at 3 inch, so for anything wider than a standard drawer one of those larger options is the right call.

No. The Schaub 10010 is an edge pull with 3 inch center to center spacing, so the hole pattern lines up, but an edge pull mounts on the edge of a door or drawer and is meant to be gripped from the front face. The Deltana PCT300 is a surface mounted wire pull that stands proud of the face. Same 3 inch number, different mounting position and different grip. Sabre edge pulls also come at 4 inch as the 10011 and 5 inch as the 10012.

Nine: PVD Polished Brass, Polished Brass, Antique Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, and Paint Black. If you are specifying for a kitchen or bath where the pulls sit near a window or sink, the PVD polished brass is the coated version and will hold its color better than the standard lacquered polished brass.

A wire pull is a thin arched loop off the face of the door or drawer, traditional in profile and easy to hook a finger through. A bar pull, like Emtek's Bar Cabinet Pull in the Schaub collection, is a straight tube and reads modern. An edge pull, such as the Schaub 10010 Sabre in solid brass, mounts on the edge of the door and sits nearly flush, which is what you want on a slab door where you do not want hardware on the face at all. The PCT300 is the traditional loop.

The Orca Hardware CK-12001 T-pull bar is steel with a 2 inch bar width, supplied in satin nickel. The Deltana PCT300 is solid brass and offered in nine finishes including Brushed Nickel, Polished Chrome and Oil Rubbed Bronze. Go steel if the substrate matters more to you than finish choice; stay with the PCT300 brass body if you need to match a broader finish palette across a kitchen.

The Omnia 1969, 1970 and 1971 are all modern cabinet pulls in forged solid brass, with projections of 1-3/16 inch, 1-1/4 inch and 1-3/16 inch respectively. You keep the solid brass construction the Deltana PCT300 uses, but in a contemporary profile rather than the traditional wire shape. Choose among the three on projection, which is how far the pull stands off the drawer face.

The Deltana PCT300 is designated for residential use. For commercial cabinetry and millwork, the Trimco 553 Series at 3 inch center to center or the 562 Series in 3-1/2 inch, 4 inch and 96mm are the drawer pull lines to look at, and the Schaub 79-8 Steamworks covers appliance pull duty at 8 inch. Use the PCT300 where the application is residential and the solid brass traditional look is what the design calls for.

Individually. The unit of measure is each, and the price shown is per pull, so count your doors and drawer fronts and order that quantity. For a kitchen refit, tally every door and drawer separately rather than by cabinet box.

The PCT300 is the 3 inch size in the Deltana traditional wire pull family. On wide drawer fronts a 3 inch pull can look undersized, and you would step up within the same traditional wire series to keep the profile consistent. If you need a genuinely long appliance-scale pull, that is a different part entirely, closer to something like the Schaub 79-8 at 8 inches.

Emtek's Schaub Collection offers several distinct styles: the Alexander, the Art Deco, and the Bar cabinet pull, plus the 8405 in the Emtek SELECT series. All are cabinet knob and pull products, so they cover the same job as the Deltana PCT300 traditional wire pull. The PCT300 is a solid brass wire profile at 3 inch; the Emtek lines let you pick a period look such as Art Deco or a plain Bar shape instead.