You may also like
Wire Pull, Traditional, 3-1/2"
The Deltana Traditional Wire Pull is a classic pull design available in an array of fine finishes.
- U/M (Unit of Measure): each - (Price displayed is per unit)
- Material: Solid Brass
- Length: 3-1/2"
Manufacturer Resources:
Manufacturer Resources
Deltana Catalog
Product Specs
- Product Group:
- Cabinet Hardware
- Product Type:
- Cabinet Pulls
- Product Subgroup:
- Cabinet Knobs and Pulls
- Subcategory:
- Miscellaneous Hardware
- Commercial/Residential:
- Residential
- Handle Type:
- Pull
- MAP Policy:
- Yes
- Product Model:
- PCT350
- Product Size:
- 3-1/2"
- Product Material:
- Brass
- Product Category:
- Door Trim & Accessories
- Product Substrate:
- Brass
- Department:
- Door Hardware
Deltana PCT350U10B – Frequently Asked Questions
1) Is the 3-1/2 inch on the Deltana PCT350 wire pull the overall length or the center-to-center spacing?
The 3-1/2 inch figure Deltana publishes for the PCT350 is the length of the pull. Center-to-center screw spacing is not the same number on a wire pull, so if you are matching existing holes in a cabinet door or drawer front, measure your hole spacing first. If your existing holes are a known 3-1/2 inch center-to-center, the Trimco 562 Series drawer pull is offered in a 3-1/2 inch ctc option.
2) If the cabinet run needs a modern look instead of the traditional Deltana PCT350 wire pull, what should I use?
The PCT350 is a traditional-style solid brass wire pull. For a modern profile in the same solid brass material, Omnia's 1968/102 is a forged solid brass modern cabinet pull with 4 inch center-to-center spacing, and the Omnia 1969, 1970 and 1971 are forged solid brass modern pulls with 1-3/16 inch, 1-1/4 inch, and 1-3/16 inch projections respectively. Emtek's Bar and Art Deco cabinet pulls from the Schaub Collection are further style options in the same cabinet knob/pull function.
3) What is the closest alternative to the Deltana PCT350 wire pull at the same 3-1/2 inch size?
The Trimco 562 Series drawer pulls are offered in 3-1/2 inch, 4 inch, and 96mm center-to-center options, so the 3-1/2 inch 562 lines up with the PCT350, which is a 3-1/2 inch solid brass traditional wire pull. The Trimco 553 Series is a drawer pull built to 3 inch center-to-center, a half inch tighter than the PCT350 if the existing holes will not move.
4) What finishes does the Deltana PCT350 traditional wire pull come in?
Nine finishes: PVD Polished Brass, Polished Brass, Antique Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, and Paint Black. If the cabinets get heavy handling or sit in a bath, the PVD Polished Brass holds its shine longer than standard lacquered Polished Brass, which will patina with wear.
5) Can I use the PCT350 wire pull on drawers as well as cabinet doors?
Yes. It is a two-post pull, so it works on either a drawer front or a cabinet door face. At 3-1/2 inches long it reads as a small pull, fine for upper doors and narrow drawers. For wide drawers or an appliance front you want something longer, like the Schaub 79-8 Steamworks 8 inch pull.
6) Is a wire pull the right choice for a cabinet with no room on the face, like a tight inset door edge?
A wire pull like the PCT350 stands off the face and needs clearance in front of the door, plus two through-holes in the face. Where the face has no room, an edge pull is the better type: the Schaub Sabre edge pulls come in 3 inch, 4 inch and 5 inch center-to-center, in solid brass.
7) Is there a larger pull than the Deltana PCT350 for a refrigerator or pantry panel?
The PCT350 is a 3-1/2 inch pull sized for cabinet doors and drawers. For an appliance panel, the Schaub 79-8 Steamworks is an 8 inch cabinet pull classed as an appliance pull, which gives the longer grip those tall doors normally call for.
8) Is the Deltana PCT350 sold as a single pull or in a pack?
Priced and sold each, one pull per unit. For a full kitchen, count your doors and drawers and order the quantity you need, all in the same finish, since finish is the only option on the pull.
How fast can I get the Deltana PCT350U10B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Deltana PCT350U10B come with a warranty?
Absolutely. The Deltana PCT350U10B is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Deltana PCT350U10B?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Deltana PCT350U10B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.