Deltana RCA430 Roller Catch, Heavy-Duty

Thick doors are what the RCA430 is built for. It's the heavy-duty version of Deltana's roller catch, solid brass, and it mortises into the edge of the door with the strike plate on the frame. Cabinet, closet, and interior doors are the intended uses. The body measures 3-5/16 inches, so lay that out on the door edge before you bore.

Everything needed to hang it is in the box: the catch, a matching strike plate, and screws finished to match. Sold each, so one box does one door. Nothing else to order unless you want a separate pull or knob, since a roller catch holds the door shut but gives you no handle.

A roller catch has no bolt and no latching mechanism, it just holds the door closed with spring tension against a strike, and you pull it open. That makes it right for closet, cabinet, and interior doors where nothing needs to lock or hold under load. If the door needs to stay shut against pressure or needs any security, you want a latchset or a lock, not a catch. The RCA430 is the heavy-duty solid brass version, rated by Deltana for commercial use, so it holds up better in traffic than a residential-grade catch.

Both are roller catches, the spring-loaded ball-and-strike hardware that holds a cabinet, closet, or interior door closed without a latch bolt. The Deltana RCA430 is a heavy-duty solid brass roller catch measuring 3-5/16 inches, packed with a strike plate and matching screws, and offered in eleven finishes including PVD Polished Brass, Oil Rubbed Bronze, Polished Nickel, Brushed Nickel, Antique Nickel, Paint Black, Polished Chrome, Brushed Chrome, Polished Brass, Unlacquered Brass, and Antique Brass. The Emtek 8801 is Emtek's roller catch in the same hardware family. For a property manager matching catches across a run of closet doors, the RCA430's brass body and finish range are the practical points to check against whatever is already installed.

Eleven finishes, which is what makes it easy to match a fleet of doors: PVD Polished Brass, Polished Brass, Unlacquered Brass, Antique Brass, Oil Rubbed Bronze, Polished Nickel, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, and Paint Black. Worth knowing the difference on the brass options: PVD Polished Brass holds its color, plain Polished Brass is lacquered, and Unlacquered Brass is meant to patina over time.

No handing on the RCA430. The roller sits in the door edge and the strike plate mounts opposite it on the jamb, so the same part works on a left or right hand door and on an in-swing or out-swing. One part number covers every opening in the building, which is why it's a simple item to standardize on.

Yes, but you need one per leaf. Each RCA430 is sold individually and mortises into the edge of one door with its own strike, so a pair of doors takes two. Order them in the same finish and they'll match, since the screws and strike plate ship finished to the catch.

The Deltana RCA430 roller catch is the one to specify when finish match drives the order. It is a solid brass heavy-duty catch offered in Polished Brass, Unlacquered Brass, PVD Polished Brass, Antique Brass, Antique Nickel, Polished Nickel, Brushed Nickel, Polished Chrome, Brushed Chrome, Oil Rubbed Bronze, and Paint Black, so the catch and its included strike plate can be brought in line with lever and hinge finishes already on the opening. The Emtek 8801 is the alternative roller catch in the same category. For a multi-family or hospitality buyer standardizing a floor of closet openings, ordering the RCA430 in a single finish keeps every visible strike plate identical.

No. A roller catch is holding hardware, not locking hardware. The Deltana RCA430 uses a spring-loaded roller and a strike plate to keep a cabinet, closet, or interior door pulled shut, and it releases when the door is pulled. It provides no keyed or thumbturn security and no latch bolt engagement. The Emtek 8801 is a roller catch as well and carries the same limitation. If the opening needs to be secured rather than simply held closed, a roller catch of either brand is the wrong part and a latch or lockset is required.

Unlacquered Brass is the one finish in the RCA430 range that will darken over time, and that's the point of it, it patinas to match aged brass hardware. If you want brass that stays bright, take PVD Polished Brass, which is a physical vapor deposition coating and holds its color, or Polished Brass. Antique Brass is factory-darkened and stays where it is.