Deltana S41/4058BR-S Special Hinges for Fiber Glass Doors, 4" x 4-1/4" x 5/8" Radius x Square Hinges, Ball Bearings, Security Stud, Steel (Pair)

The extra quarter inch of leaf width is a wider throw. That is what lets a fiberglass entry door with a thick brickmould or heavy exterior casing swing clear of the trim instead of binding on it. The hinge measures 4 inches by 4-1/4 inches, so the hinge height still matches a standard 4 inch mortise, only the open width changes.

Yes, provided your existing pocket has one radiused edge and one square edge. The corner style is 5/8 inch radius by square corners, which is the common combination on a prehung fiberglass or steel entry slab where the door leaf is router cut and the jamb leaf is square. If both corners of your mortise are square, or both are radiused, the leaf will not sit flush.

Yes, handing has to be specified. Because one leaf has radius corners and the other is square, the hinge is not reversible. It comes as Left Hand (LH) or Right Hand (RH). Stand outside the door: if the hinges are on your right and the door opens away from you, that is right hand.

The stud is a pin on one leaf that seats into a hole in the opposite leaf when the door is closed. If someone pulls the hinge pin from the outside, the stud keeps the door locked into the jamb. It is the security tab option (Sec/Loc. Tab) on this hinge. Note the pin itself is not a non-removable pin, so the stud is doing the anti-removal work, not the pin.

It is classified residential. Steel, 0.092 inch leaf thickness, ball bearing. That suits a house or a multi-family unit entry door. For a commercial door with closer traffic, look at a heavy weight full mortise ball bearing hinge like the Don-Jo HWBB84545 in 4-1/2 x 4-1/2, or the Ives 3CB1HW heavy weight concealed bearing hinge.

The pin on this Deltana hinge is not a non-removable pin. The security stud handles pin-pulling attacks instead, and on an outswing door that stud is the part doing the work. If your spec explicitly calls for NRP, the Hager BB1168-NRP full mortise ball bearing hinge is built with the set screw pin.

The Deltana S41/4058BR-S is classified for residential use. For a commercial door of comparable leaf size, the Orca Hardware COM4040 is a 4 inch by 4 inch square corner plain bearing commercial hinge rated medium duty, and the COM4014 is the same 4 inch by 4 inch size with a 1/4 inch radius corner. If you want bearings on the commercial side, the Orca COM3535 is a 4-1/2 inch by 4-1/2 inch square corner ball bearing commercial hinge, medium duty, which needs a larger mortise than the Deltana prep.

They sell as a pair, so a standard three-hinge entry door takes two packs and leaves you a spare, or you buy one pair plus a third hinge. Most fiberglass exterior slabs use three hinges.

Ball bearing, which is what the Deltana S41/4058BR-S uses. A fiberglass entry slab is heavy and gets cycled daily, and the bearings keep it from sagging and squealing. Plain bearing hinges such as the Emtek 91013 or the Schlage Residential S3P1010 are fine for lighter interior doors but are not the right pick for a weighted exterior slab.

If your casing does not force the door out past the trim, a standard width hinge is cheaper and simpler. The Delaney RH45 series 4 x 4 exterior residential hinge with 5/8 inch radius corners is the closest straight match, sold as a pair. For a square corner commercial 4 x 4, the Orca Hardware 4040 Series is an option. The Deltana S41/4058BR-S is only worth the extra width when trim clearance is the problem.

The Deltana S41/4058BR-S carries a security stud plus ball bearings, which is specified where you want the leaves interlocked against removal. If the opening does not call for that, the Delaney RH45xx is a 4 inch by 4 inch bulk residential exterior hinge with a 5/8 inch radius corner sold as a pair, and the Delaney RH40xx is a 4 inch by 4 inch residential hinge with 5/8 inch radius by square corners, also by the pair. Both match the Deltana's residential application classification and pair packaging without the bearing and stud package.

The Deltana S41/4058BR-S is a standard full mortise ball bearing hinge and does not close the door on its own. Where the opening needs the hinge to do the closing, the Stanley Security 2060R is a full mortise spring hinge with square corners at 4-1/2 inch by 4-1/2 inch on a ferrous steel base, rated heavy duty. It is a larger leaf than the Deltana, so plan the mortise accordingly.

No. The Deltana S41/4058BR-S is a mechanical steel hinge with ball bearings and a security stud and carries no wiring. To transfer power or signal through the hinge, the Command Access ETH-BB68 is a 5-knuckle heavy duty energy transfer hinge on a steel base, and the ETH-CB70 is a 3-knuckle standard weight energy transfer hinge, medium duty. If you also need door position sensing, the Command Access ETM-BB68 is an energy transfer hinge with an integrated door position switch. The BEST CECB179-12C is a steel full mortise concealed bearing electrified hinge with a 12-wire quick connect.

The Deltana S41/4058BR-S security stud is intended to resist leaf separation on a residential-class fiberglass or exterior door, not to meet detention requirements. Detention openings call out purpose-built hardware: the BEST BB855 is a heavy-duty steel double weight concealed ball bearing prison hinge from the detention hardware series, the Stanley BB855 is a double weight prison hinge at 5 inch by 6 inch furnished with no holes and not swaged, and the Hager 990 STEEL is a full surface prison hinge at 3 inch by 4 inch with a welded tip, heavy duty.

The Deltana S41/4058BR-S is sized 4 inch by 4-1/4 inch and will not drop into a 3-1/2 inch mortise. For those openings the Delaney RH35xx is a 3-1/2 inch by 3-1/2 inch bulk steel residential interior hinge with a 5/8 inch radius corner, sold as a pair, which matches the Deltana's corner radius. If your prep is square-cornered instead, the Schlage Residential S3P1010 is a 3-1/2 inch by 3-1/2 inch square corner plain bearing mortise hinge in packs of three, and the Ives 1010RP is a steel plain bearing residential hinge with square corners in sets of three.

Zinc dichromate only, in both left and right hand. That is a plated utility finish, so it is meant for openings where the hinge is either painted to match or hidden behind trim rather than shown as a decorative finish.

The Deltana S41/4058BR-S uses exposed ball bearings between the knuckles and adds a security stud. The Ives 3CB1 is a 3-knuckle concealed bearing full mortise hinge rated medium duty, where the bearing is hidden inside the barrel for a cleaner knuckle line; the Hager 920 is another concealed bearing full mortise hinge, built as a 2-knuckle steel unit. Both are full mortise like the Deltana, but the knuckle count and bearing arrangement change the appearance and the barrel profile at the edge of the door.