Deltana SDH101 Shutter Door Holder, 1-1/4"

Either, depending on how you mount it. The SDH101 is a small solid brass and steel holder that keeps a shutter door or window in an open or a closed position, so the same part covers both jobs on a bank of shutters. It is a holder, not a latch with a keeper and a bolt.

1-1/4 inches. That is the whole size range for the SDH101, so if you need a longer reach between the shutter and the wall or jamb, this is not the piece to specify. On narrow trim and tight reveals the 1-1/4 inch body is what makes it fit.

Nine: PVD Polished Brass, Polished Brass, Antique Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, and Paint Black. That covers matching most existing Deltana shutter hinges and pulls across a building. If you are standardizing across a lot of openings, PVD Polished Brass is the one that holds its color longest of the brass tones.

Solid brass and steel construction, with brass as the substrate. That matters on exterior shutters, where a cast zinc holder gives up first at the fastener holes. The brass body is what you are paying for.

Order one per leaf you want held. The SDH101 sells each, not by the pair, so a pair of shutters on one window takes two, and a bank of eight leaves takes eight. Get them all in the same finish in one order so the plating batch matches.

It is rated commercial, so it is appropriate on hospitality, multi-family, and institutional shutter and window work, not just houses. Solid brass and steel is the reason it carries that rating.

No special prep. It is a surface-applied holder that fastens to the shutter and the adjacent surface, which is why it works as a retrofit on shutters that are already hung. No mortising, no boring.