Deltana SDP25 Pocket Door Lock, 2-1/2" x 2-3/4" Passage

The SDP25 plate measures 2-1/2 x 2-3/4 inches. That is the footprint your mortise and face prep have to match, so if you're replacing an older pocket set, measure the existing plate before you order. A different footprint means patching or a filler plate. Deltana's own pocket locks in other sizes and the Emtek 2101 at 2-3/8 x 3-1/8 inches will not drop into an SDP25 prep.

The Deltana SDP25 is built for 1-3/8 inch doors in a 2-1/2 inch by 2-3/4 inch passage plate. When the door is thicker, the Weslock 0527 rectangular passage pocket door lock covers a 1-3/8 inch to 2 inch door thickness range and carries the same passage/hall/closet function, so it holds the same no-locking operation across a thicker slab. The Weslock 0627 is the round-trim passage version of the same idea, also passage/hall/closet function with an adjustable backset and full lip strike.

The Deltana SDP25 is a passage/hall/closet function, meaning it operates the door with no locking. For a bath or bedroom that needs privacy, the Omnia 7012/L modern rectangular pocket door lock is a privacy function with an emergency release, and the Weslock 0577 rectangular privacy pocket door lock adds an adjustable backset and full lip strike across a 1-3/8 inch to 2 inch door thickness range. The Rockwood 891 pocket door privacy latch is another privacy/bed/bath option, and Orca Hardware offers privacy in both trim shapes: PDLRD round and PDLSQ square.

Both are passage pocket door locks, but the plates are different sizes. The Deltana SDP25 uses a 2-1/2 inch by 2-3/4 inch plate; the Emtek 2101 passage pocket door lock is 2-3/8 inch by 3-1/8 inch. Swapping one for the other means the existing mortise cutout and plate footprint in the door edge and face will not line up, so plan on rework rather than a straight exchange. Emtek's privacy counterpart in the same 2-3/8 inch by 3-1/8 inch size is the 2102.

The Deltana SDP25 is passage function and has no cylinder. For a locked opening such as an office, storage room, or a unit door off a common corridor, the Omnia 7035/A is a keyed entry pocket door lock with modern rectangular trim and solid brass construction, and the Emtek 2153 narrow modern rectangular pocket door mortise lock is a keyed unit in a 2 inch by 7-1/4 inch trim.

Eleven, so matching existing door hardware across a unit or a floor is usually straightforward: PVD Polished Brass, Polished Brass, Antique Brass, Oil Rubbed Bronze, Polished Nickel, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, Paint Black, and a two-tone Polished Brass / Polished Chrome. The PVD polished brass is the one to specify where the finish takes heavy handling and you don't want it to wear off.

Solid brass throughout, not plated pot metal. That matters on a pocket lock because the pull cup and edge pull take a fingernail-and-thumb load every cycle, and brass holds thread and doesn't fatigue at the pull the way a thin stamping does. It's the reason this one shows up on multi-family and hospitality turnovers where a cheap pocket pull is the part that keeps coming back.

The Deltana SDP25 is a passage pocket door lock in solid brass at 2-1/2 inch by 2-3/4 inch, latching the door closed without locking. If the opening only needs a pull and no latching at all, the Omnia 7012/PD modern rectangular pocket door lock set is a pair dummy function with a mortise edge pull. The Omnia 7012/N is the middle ground: passage function with a mortise edge pull.

They are close in intent but the door thickness windows differ. The Deltana SDP25 is specified for a 1-3/8 inch door. The Pamex PF1 square style sliding door lock and the PF2 round sliding door lock both cover a 1-5/16 inch to 1-9/16 inch door thickness range, with the PF2 set at a 2-3/8 inch backset. Confirm the slab thickness and the existing edge prep before treating either as a swap for the SDP25.

No. The Deltana SDP25 is the pocket door lock hardware itself, a 2-1/2 inch by 2-3/4 inch solid brass passage unit for the door. The carriage and the pocket are separate line items: the Orca Hardware PK1200 is a pocket door frame kit for 1 inch or 1-3/4 inch doors, and the NGP SLAL250PD72 is a 72 inch aluminum pocket door track rated up to 250 pounds. On a new opening, expect to buy the frame or track alongside the lock.

The Deltana SDP25 covers the passage/hall/closet openings in solid brass across eleven finishes including oil rubbed bronze, polished chrome, brushed nickel, and antique brass. Where the same building needs privacy on baths and bedrooms, Weslock keeps one trim family across both functions: the 0527 rectangular passage and the 0577 rectangular privacy, both rated 1-3/8 inch to 2 inch door thickness. Omnia does the same in modern rectangular with the 7012/N passage and the 7012/L privacy with emergency release.

The Deltana SDP25 is a compact 2-1/2 inch by 2-3/4 inch brass plate. For a longer, more traditional face plate, the Emtek #8 classic arched pocket door mortise lock is a brass unit measuring 2-7/8 inch by 7-5/8 inch. For a long, narrow modern profile instead, the Emtek 2153 narrow modern rectangular pocket door mortise lock runs 2 inch by 7-1/4 inch. Both are larger cutouts than the SDP25, so match the trim size to the door prep on the job.