Deltana SDL25 Pocket Door Lock, 2-1/2" x 2-3/4" Privacy

That's exactly what it's for. The SDL25 is a privacy/bed/bath function, so it thumb-turns locked from inside the room. Use it on a bathroom or bedroom pocket door. If you want the door to simply slide with no locking at all, that's a passage lock instead, like the Emtek 2101 or the Weslock 0527. If the pocket door needs to be keyed from outside, neither will do it, and the Omnia 7035/A is the keyed entry version.

The SDL25 is privacy function, locked from the inside only, with no key. For a keyed pocket door, the Omnia 7035/A is a keyed entry pocket door lock with modern rectangular trim and solid brass construction, and the Emtek 2153 narrow modern rectangular pocket door mortise lock is a keyed unit on a 2 inch by 7-1/4 inch plate. Note the Emtek 2153 plate is far longer than the 2-1/2 inch by 2-3/4 inch SDL25 trim, so a keyed swap into an existing SDL25 pocket means a new mortise.

The SDL25 is a privacy/bed/bath pocket door lock with a 2-1/2 inch by 2-3/4 inch trim plate. When that footprint does not land on the existing cutout, the Emtek 2102 is also a privacy pocket door lock and uses a 2-3/8 inch by 3-1/8 inch plate, so it is taller and slightly narrower. The Weslock 0577 rectangular privacy pocket door lock is another privacy option and includes an adjustable backset and a full lip strike, which gives you room to meet an edge bore that does not match. Confirm the plate outline against the mortise pocket in the door before ordering either.

The Deltana SDL25 is built for a 1-3/8 inch door thickness in solid brass. For a thicker slab, the Weslock 0577 rectangular privacy pocket door lock covers 1-3/8 inch to 2 inch doors, and the Pamex PF1 square style sliding door lock covers 1-5/16 inch to 1-9/16 inch. The Pamex PF2 round sliding door lock covers the same 1-5/16 inch to 1-9/16 inch range with a 2-3/8 inch backset. Measure the slab at the lock edge, since pocket door slabs vary from the nominal call-out.

The SDL25 is a privacy/bed/bath lock, so it latches and locks from inside the room. For an opening that only needs a pull and latch, the Emtek 2101 passage pocket door lock and the Weslock 0527 rectangular passage pocket door lock are passage function with no locking; the Weslock 0527 covers 1-3/8 inch to 2 inch doors. The Weslock 0627 is the round-trim passage version with an adjustable backset and full lip strike, and the Omnia 7012/N is a passage pocket door lock with a mortise edge pull. If the door is decorative and never operates, the Omnia 7012/PD is a pair dummy set.

No. The Emtek #8 classic arched pocket door mortise lock uses a 2-7/8 inch by 7-5/8 inch brass trim, and the Emtek 2153 narrow modern rectangular pocket door mortise lock uses a 2 inch by 7-1/4 inch trim. Both are long mortise-style plates. The Deltana SDL25 is a compact 2-1/2 inch by 2-3/4 inch privacy unit, so swapping it into a door cut for either Emtek leaves an exposed pocket. Going the other direction requires deepening the mortise. Match the plate dimensions to the existing cutout before treating any of these as interchangeable.

Eleven, so matching existing trim in a house or a hotel floor is usually possible: PVD Polished Brass, Polished Brass, Antique Brass, Oil Rubbed Bronze, Polished Nickel, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, Paint Black, and a two-tone Polished Brass / Polished Chrome. The PVD polished brass is the one to specify where the lock takes daily hand traffic and you don't want the brass to tarnish.

Solid brass throughout, not a plated pot-metal casting. For a property manager standardizing bathroom pocket doors across units, that's the difference between a thumb-turn that survives years of use and one that snaps. Deltana rates the SDL25 for commercial use.

It's a pocket door lock, mortised into the leading edge of a door that slides into a wall cavity, and it latches against the jamb at the pocket opening. A surface-mounted barn door that hangs in front of the wall has no jamb to latch into, so this won't secure one. A bypass slider where the panels overlap doesn't present the flat edge this needs either. Pocket openings only.

For units where staff must get in from the corridor side, the Omnia 7012/L modern rectangular pocket door lock is privacy function with an emergency release. The Deltana SDL25 is a privacy/bed/bath pocket door lock in solid brass with a 2-1/2 inch by 2-3/4 inch trim, offered in eleven finishes including oil rubbed bronze, brushed nickel, polished chrome and paint black, so it is the one to match when the rest of the doors in the building are already Deltana. Decide the release requirement first, then match finish.

Yes. The Deltana SDL25 uses a rectangular 2-1/2 inch by 2-3/4 inch trim. The Orca Hardware PDLRD is a round pocket door lock in privacy function, and the Pamex PF2 is a round sliding door lock with a 2-3/8 inch backset for 1-5/16 inch to 1-9/16 inch doors. If you want to stay square but change brands, the Orca Hardware PDLSQ is a square pocket door lock in privacy function and the Pamex PF1 is the square style sliding door lock. Trim shape drives the mortise pocket, so pick the shape that matches the doors already cut.

The Rockwood 891 pocket door privacy latch is a privacy/bed/bath device and a more reduced piece of hardware than a full trim set. The Deltana SDL25 is a solid brass privacy/bed/bath pocket door lock rated commercial, on a 2-1/2 inch by 2-3/4 inch trim, and comes in eleven finishes including polished chrome, brushed chrome and antique nickel for matching an existing finish standard across a facility. Choose on the finish and trim standard you are holding to across the building.

The Deltana SDL25 is the privacy lock and trim only, for a 1-3/8 inch thick door. The frame and rolling gear are separate line items: the Orca Hardware PK1200 pocket door frame kit covers 1 inch or 1-3/4 inch doors, and the NGP SLAL250PD72 is a 72 inch aluminum pocket door track rated up to 250 pounds. On new construction, order the frame kit or track alongside the lock so the opening is complete.

No handing to specify. Ordering the SDL25 comes down to one choice, the finish, across the eleven Deltana offers. It's sold each, so a two-door bathroom pair means two units.