Deltana SSPORBB24 24" Back-to-Back Round Offset Door Pulls

The SSPORBB24 mounts back to back through the door and handles a maximum door thickness of 3 inches, which covers standard wood doors, thick storefront-style wood slabs, and glass. The kit ships with the installation hardware needed for both glass and wood doors, so you are not sourcing separate through-bolts or glass mounting studs. If your door is thicker than 3 inches, this pull set won't reach.

You get two pulls. The SSPORBB24 is sold as a set (U/M: Set) in a back-to-back configuration, meaning one 24 inch offset pull on each face of the door, bolted through to each other. That is the usual arrangement on a glass entry door where you pull from outside and push-pull from inside. Ordering one part number covers the whole opening, not one leaf face.

For an opening where ADA compliance has to be stated on the submittal, the Ives 8145EZHD is a 45 degree offset door pull described as ADA compliant, in the heavy duty EZ series with heavy duty mounting hardware. The Deltana SSPORBB24 is a 24 inch back-to-back round offset stainless pull whose kit includes the installation hardware for glass and wood doors. If the drawing calls out an ADA compliant pull specifically, the 8145EZHD is the one that carries that description.

Deltana's offset stainless pulls come in three lengths, and 24 inches is the longest of the range. Pick it for full-height glass entry doors and main entrances where the pull is meant to read as a vertical element and give more than one hand position. On a standard interior wood door or a restroom door, a 24 inch pull is oversized and one of the shorter lengths in the same series is the better call.

Commercial. The SSPORBB24 is classified as a commercial pull and is solid stainless steel through the grip and the offset standoffs, which is why it is through-bolted rather than surface screwed. Through-bolting is what lets a pull take repeated hard entry loads without loosening the mounting, and it is the reason this style shows up on retail, office, and multi-family entries rather than on interior passage doors.

An offset pull steps the grip away from the door face on angled or bent standoffs, so your hand clears the door and there is knuckle room behind the bar. A straight pull runs parallel to the face on two short posts. The Deltana SSPORBB24 is the round offset type. If you want the straight version instead, the ABH AB3300 is a straight flat end pull at 1 inch diameter, and the Ives 8103HD is a 1 inch round straight pull with through-bolt mounting. For a pronounced angle, the Ives 8145 is a 45 degree offset pull.

No. Back to back means a pull on both faces, so the inside gets the same 24 inch offset pull rather than a plate. If your design calls for pull one side and push the other instead, that is a different setup and you would pair a single pull with a plate such as the Trimco 1001 heavy duty push plate at 3 x 12 inches, or the Trimco 1070 Series push/pull plates at 3-1/2 x 15 inches. Back-to-back pulls are the norm on glass doors because there is no stile to hide a plate's fasteners.

If the opening does not need the offset standoff, straight-bar pulls cover the same grip. The ABH AB3300 is a straight flat end commercial door pull at 1.00 inch diameter, and the ABH AB7200 is a solid stainless steel flat end pull at 7/8 inch diameter with through-bolt mounting. From Ives, the 8102HD is a heavy duty straight pull with a 3/4 inch round bar and 1-1/2 inch clearance, and the 8103HD is a heavy duty straight pull in 1 inch round with through bolt mounting. The Deltana SSPORBB24 differs in carrying the offset form and in being furnished back-to-back as a set.

The SSPORBB24 is furnished back-to-back, meaning a pull on each face. Where the push side should take a plate instead, the Trimco 1001-1 is a heavy duty push plate at 3 inches by 12 inches, the Trimco 1041 is a half-round push plate at 8 inches by 16 inches, and the Trimco 1070 series is a classic push/pull plate at 3-1/2 inches by 15 inches. Those pair a flat push surface with a pull rather than mounting a matching pull through the door.

No. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inches in height, in stainless steel construction - it is the small pull that mounts around a rim cylinder so the door can be pulled shut at the lock. The Deltana SSPORBB24 is a 24 inch back-to-back round offset pull for commercial door hardware. They serve different points on the door and are not interchangeable, though both are stainless.

The Deltana offset stainless pulls come in three lengths, the SSPORBB24 being the 24 inch. If the opening needs a length outside that range, the ABH AB3330 is an offset round end pull offered with custom length options, and the ABH AB3310 is an offset flat end commercial pull in a surface mount configuration. The AB3330 keeps the round end profile closest to the Deltana; the AB3310 changes the end to flat.

Stainless is the material to use on an exterior entry. The SSPORBB24 is stainless steel in both the grip and the substrate, so it resists the corrosion that plated brass pulls suffer at coastal and de-iced-sidewalk entrances. Brushed Stainless is the finish that ages best in that service because scratches and hand traffic blend into the grain instead of showing as bare metal under a coating.

No handing to specify. The SSPORBB24 is a symmetrical round offset pull mounted vertically back to back, so it works on a left or right hand door and on either leaf of a pair without ordering anything different. The only choice at order time is finish, Paint Black or Brushed Stainless. Compare that with a shaped decorative pull like the Emtek Art Nouveau 8 inch, which is ordered by handing.

Yes, and that is the practical reason to spec it across a facility. The same SSPORBB24 set installs on wood doors as well as glass because both mounting kits are in the box, up to a 3 inch door thickness. Run Brushed Stainless on the glass entries and the wood interior doors and the openings read the same. If a given door needs a shorter grip, the Deltana offset stainless pulls come in three lengths in the same round offset profile and finishes.