Deltana SSPORBB36 36" Back-to-Back Round Offset Door Pulls

Yes. The SSPORBB36 handles doors up to 3 inches thick, so a standard 1-3/4 inch commercial door is well inside the range, as is a 1-3/8 inch interior door. That 3 inch ceiling is what makes this set usable on thick glass entry doors and heavy timber slabs where most back-to-back pulls run out of thread.

Installation hardware is in the box. Deltana ships the Round Offset pull kits with the fasteners needed for both glass and wood doors, so a glass front installer setting these on a tempered glass entry and a contractor hanging them on a wood slab both work from the same kit. Nothing extra to source for the mount itself.

It's a set. Back-to-back means two 36 inch offset pulls, one each side of the door, through-mounted so they fasten against each other. Order one SSPORBB36 per opening, not two. If you only need a pull on the exterior with a push plate inside, this isn't the right configuration.

No. The SSPORBB36 is a back-to-back set, meaning both pulls through-bolt against one another and neither mounts on its own. For a true push/pull opening you want a pull on one face and a plate on the other, such as the Trimco 1001-1 heavy duty push plate at 3 x 12 inches, the Trimco 1041 half-round push plate at 8 x 16 inches, or the Trimco 1070 Series push/pull plates at 3-1/2 x 15 inches.

Yes, provided the glass is prepped with holes on the pull's mounting centers. Deltana includes the hardware for glass doors in the kit alongside the wood door hardware, and the set handles material up to 3 inches thick, which covers any tempered glass leaf. Since glass can't be drilled on site, get the fabricator the mounting centers before the glass is tempered.

The ABH AB3330 is the nearest match in form. It is an offset round end pull offered with custom length options, so it can be specified at or near the 36 inch size the Deltana SSPORBB36 comes in. The Deltana is stainless steel and ships back-to-back for a pair of doors or a single door pulled from both sides, in Paint Black or Brushed Stainless. Ives also builds an offset round pull, the 8169 C style offset solid pull at 1 inch diameter, if you want a fixed catalog size rather than a made-to-length run.

The offset geometry of the Deltana SSPORBB36 stands the grip away from the door face. If the opening calls for a straight bar instead, the ABH AB3300 is a straight flat end pull at 1.00 inch diameter, and the ABH AB7200 is a solid stainless steel flat end pull at 7/8 inch diameter with through-bolt mounting. Ives covers the same shape with the 8102HD heavy duty straight pull, a 3/4 inch round bar with 1-1/2 inch clearance, and the 8103HD heavy duty straight pull in 1 inch round with through bolt mounting. All are straight-bar substitutes; the flat end and round end profiles differ in how the bar terminates at the standoff.

The Ives 8145EZHD is a 45 degree offset door pull described as ADA compliant, supplied with heavy duty mounting hardware. That is the one to quote when the drawing calls out ADA on the pull itself. The Deltana SSPORBB36 is a commercial stainless steel back-to-back round offset pull whose kit includes the installation hardware for glass and wood doors and handles doors up to 3 inches thick, so it is the choice when the deciding factor is glass door mounting and door thickness rather than a stated ADA callout.

The Deltana Offset Stainless Steel pulls run in three lengths, and 36 inches is the longest of the family. If a 36 inch pull is more than your opening needs, look at the shorter lengths in the same Round Offset series so the finish and profile stay consistent across a set of doors.

An offset pull steps the grip away from the door face on angled or curved returns, so your knuckles clear the frame and the hand naturally wraps the bar. A straight pull mounts the bar parallel to the door on two posts, which is a simpler look but gives you less clearance at the hinge or the stile. If you want the straight profile instead, the Ives 8103HD is a 1 inch round straight pull with through-bolt mounting, and the ABH AB3300 is a 1 inch diameter straight flat end commercial pull.

The Ives 8145EZHD is a 45 degree offset pull listed as ADA compliant with heavy duty mounting hardware. Other offset options ZenSupply carries are the ABH AB3330, an offset round end pull with custom length choices if 36 inches isn't the length you need, and the Ives 8169, a C style offset solid pull at 1 inch diameter. The Deltana is the one to pick when you want stainless in brushed or black and a kit that mounts to glass as well as wood.

That's what the kit supports. One set covers both substrates because the fasteners for glass and for wood ship in the box, and the 3 inch thickness range takes everything from a 1-3/8 inch interior wood door to a thick glass entry leaf. Specify the same finish, Brushed Stainless or Paint Black, across the run and the openings match even where the door construction doesn't.

The Cal-Royal PUL-175 is filed as a door pull and is stainless steel like the Deltana SSPORBB36, but it is a night latch cylinder pull at 3-1/2 inch height, a small plate that surrounds a rim cylinder so the door can be pulled shut at the lock. It is not a grip for opening a wide door. The Trimco 1035 Ultimate Restroom Pull is another one to keep separate; it is a heavy duty restroom-specific pull rather than a general entry pull. For an entry that needs a long grip, stay with a full-length offset pull.

Two: Brushed Stainless and Paint Black. Brushed stainless is the one that blends with the mill-finish rails and stainless push plates already on most storefronts; paint black is the match for black anodized or painted aluminum entrances. Both are over a stainless steel body, so the substrate under either finish is the same.

No handing to call out. The SSPORBB36 is a symmetrical back-to-back offset pull set, so it goes on either a left or right hand door without a variant change. The only choice on the order is finish, Brushed Stainless or Paint Black. By contrast, a decorative pull like the Emtek Art Nouveau 8 inch does require you to select handing.

Ives lists the 8102HD, 8103HD, 8145EZHD, and 8169 at a heavy duty level, and Trimco lists the 1035 and 1041 the same way. The Deltana SSPORBB36 is a stainless steel pull specified for commercial use, supplied as a back-to-back set at 36 inches with mounting hardware for glass and wood doors up to 3 inches thick. Pick on what the opening is: the Ives heavy duty bars are the through-bolted wood and hollow metal answer, the Deltana carries the glass door hardware in the kit.