Deltana TSH40 Triple Swivel Coat Hook, Heavy-Duty, 4" Projection

The TSH40 projects 4 inches off the mounting surface, with a base measuring 3-1/8" x 1-1/2". That 4 inch reach is what lets three arms hold bulky items like winter coats or a loaded garment bag without them pressing against the wall. It's a lot of projection for a tight hallway, so plan the mounting height and traffic path around it.

Yes, the triple swivel hook is made to go on a wall or on the inside face of a closet door. Two things to watch on a door mount: the base footprint is 3-1/8" x 1-1/2", so you need a flat stile or panel that wide, and the arms project 4 inches, so the door has to close without the hook or whatever's hanging on it fouling the jamb or shelving.

Deltana catalogs the TSH40 as a residential hook. It's a fit for apartments, condo units, hotel guest rooms, and single-family work. For a school corridor, a locker room, or a public restroom where the hook takes abuse and needs to match institutional trim, look at a commercial coat and hat hook instead, such as the Trimco 3070-1.

The Deltana TSH40 is a heavy-duty triple swivel hook in solid brass with a 4 inch projection and a 3-1/8 inch by 1-1/2 inch base. When one garment position per mounting point is what the opening calls for, the Emtek 2606 Solid Brass Robe Hook from the Traditional Bath Hardware series is the solid brass single hook to look at, and the Orca Hardware 2753 Cypress Robe Hook covers the same single-arm role in the 27-Cypress Series. Both are single robe hooks rather than multi-arm units, so a run of coat positions is achieved by spacing several hooks along a wall or closet door rather than by one wide base.

The Deltana TSH40 triple swivel hook is designated for residential use. For commercial coat and hat duty, the Trimco 3070-1 Coat and Hat Hook from the 3070 Series is the commercial-line coat and hat hook in the set, and the Trimco 7010 fOCAL Robe Hook and Stop from the 7010 Series combines the hook with a door stop function in one device, which is the piece to specify on a restroom partition or door where the hook also has to arrest the door swing.

Capacity and reach. The Deltana TSH40 is a coat hook: three swiveling arms and 4 inches of projection, sized for outerwear, bags, and multiple garments at one mounting point. A robe hook, like the Emtek 25050 wrought steel robe hook or the Emtek 2306 sandcast bronze double hook, is a bath fixture built for a towel or a robe and sits much closer to the wall. Use the triple for an entry, a mudroom, or the back of a closet door, and a robe hook in the bathroom.

Solid brass throughout, not a plated zinc casting. That matters for a hook meant to carry three loaded arms at 4 inches of leverage, and it's why the finishes include living options like polished and antique brass rather than paint-only coatings.

Nine finishes: PVD Polished Brass, Polished Brass, Antique Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, and Paint Black. If you're matching hooks to existing lever sets and hinges across a building, the PVD polished brass is the one to pick over standard polished brass where the hardware sees hands and cleaning chemicals, since PVD is the coated version rather than lacquered.

Three arms on one base, so a single TSH40 covers what three separate robe hooks would, off one 3-1/8" x 1-1/2" footprint and one set of fasteners. For a rental unit or a hotel room where you want capacity behind one door, that's a single install. If you only need one or two garments per spot and want them spread along a wall, individual hooks like the Orca Hardware 2753 Cypress robe hook or the double-arm Orca 4854 Blakely give you that spacing instead.

Same TSH40 hook in all nine finishes, including oil rubbed bronze, so you can standardize one part across a property and vary the finish by building or floor if you need to. Solid brass base metal in every one, 4 inch projection, 3-1/8" x 1-1/2" base. Ordering is by the each.

Yes. The Deltana TSH40 carries three swiveling arms on one base for closet doors and walls. For two hanging positions per base, the Orca Hardware 4854 Blakely Double Robe Hook and the Orca Hardware 4954 Whidbey Double Robe Hook are double hooks, as is the Emtek 2306 Sandcast Bronze Double Hook and the Emtek 2266 SELECT Knurled Tip Double Hook with Rosette. The Emtek 2266 mounts on a rosette and the 2306 is sandcast bronze, so the two differ in both mounting look and material from the brass TSH40.

The Deltana TSH40 is solid brass and offered in PVD Polished Brass, Polished Brass, Antique Brass, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, Oil Rubbed Bronze and Paint Black. When the base metal itself needs to differ, the Emtek 25050 Wrought Steel Robe Hook is a wrought steel hook in the Wrought Steel Bath Hardware series and the Emtek 2306 Sandcast Bronze Double Hook is sandcast bronze, both of which read differently in hand and at the surface than a machined brass body.

They are not the same device even though both hang garments. The Deltana TSH40 is a heavy-duty triple hook with three swiveling arms on a 3-1/8 inch by 1-1/2 inch base and a 4 inch projection, built to take coats on a wall or the inside of a closet door. Bath robe hooks such as the Emtek 2606 Solid Brass Robe Hook, the Orca Hardware 3654 Swirl Robe Hook in the 36-Swirl Series and the Emtek 25050 Wrought Steel Robe Hook are single fixed hooks sized for a robe or towel, so swapping one in gives a single non-swiveling position rather than three.

Sold individually, one hook per unit, priced by the each. Order the count you need per door or per wall rather than working from a carton quantity.

The Deltana TSH40 triple swivel hook runs across nine finishes, from PVD Polished Brass and Antique Brass through Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, Oil Rubbed Bronze and Paint Black, so one model covers a range of unit styles. If the standard needs to be a named design series instead, Orca Hardware groups its hooks that way with the 2753 in the 27-Cypress Series, the 3654 in the 36-Swirl Series, the 4854 in the 48-Blakely Series and the 4954 in the 49-Whidbey Series, and Emtek does the same with the 2606 in Traditional Bath Hardware and the 2266 in Select Bath Hardware, which lets a bath and closet package be pulled from one family.