Deltana CAHH35 Heavy-Duty Coat Hook

Projection on the CAHH35 is 3 inches, so a coat or jacket hangs clear of the wall rather than pressing against it. The mounting base is 1-1/2 x 1-1/4 inches, which is a small enough footprint to line several up along a narrow strip of wall or a back-of-door rail without them crowding each other.

The CAHH35 is a residential-grade hook. The heavy-duty label refers to the build of this model within Deltana's hook range, not a commercial duty rating. For a school, locker room, restroom, or corridor where the hook takes abuse and needs to match institutional trim, a commercial coat and hat hook such as the Trimco 3070-1 is the right family to look at instead.

The Deltana CAHH35 is a heavy-duty solid brass coat and hat hook with a 1-1/2 inch by 1-1/4 inch base and 3 inch projection. The nearest solid brass peer is the Emtek 2606 Solid Brass Robe Hook from Emtek's Traditional Bath Hardware series. Both are single-point wall hooks in solid brass, so either takes a coat or a robe on the same kind of wall or door mount. The difference is scope: the CAHH35 is a coat and hat hook offered across eleven finishes including PVD Polished Brass, Oil Rubbed Bronze, Unlacquered Brass and Paint Black, while the 2606 is styled to coordinate with the rest of an Emtek Traditional bath suite.

The CAHH35 is a single heavy-duty coat and hat hook on a 1-1/2 inch by 1-1/4 inch base. For two garments at a single mounting point, step to a double hook: the Emtek 2266 SELECT Knurled Tip Double Hook with Rosette, the Emtek 2306 Sandcast Bronze Double Hook, the Orca Hardware 4854 Blakely Double Robe Hook, or the Orca Hardware 4954 Whidbey Double Robe Hook. Each is a double hook rather than a single, so one anchor point serves two hanging positions - useful in an entry closet or a bathroom where wall space is short.

The Deltana CAHH35 is classified residential, so for institutional traffic the commercial-line peers are the better fit: the Trimco 3070-1 Coat and Hat Hook from the 3070 series, or the Trimco 7010 fOCAL Robe Hook and Stop from the 7010 series. The 7010 combines the hook with a door stop in one piece, which is what a restroom partition or a back-of-door application in a facility usually calls for. Specify the CAHH35 where the decorative solid brass finish range matters - eleven options including Polished Nickel, Brushed Chrome and Antique Nickel - and the Trimco pieces where the spec calls for commercial-line coat and hat hardware.

Screws are included. Each CAHH35 ships individually poly bagged with matching screws, so the fasteners are finished to match the hook rather than showing bright steel heads against an oil rubbed bronze or black plate. It is sold each, so order one per hook location. The screws supplied suit a solid substrate; hollow drywall between studs needs anchors, which are not part of the pack.

Eleven finishes cover the CAHH35: PVD Polished Brass, Polished Brass, Unlacquered Brass, Antique Brass, Polished Nickel, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, Oil Rubbed Bronze, and Paint Black. For a property manager matching existing door hardware across a building, PVD Polished Brass is the one to pick if the hook sits somewhere humid, since PVD is a harder coating than standard lacquered polished brass. Unlacquered Brass is the opposite choice, it is meant to darken and patina.

Yes, the base is only 1-1/2 x 1-1/4 inches and it fixes with two supplied screws, so it mounts on a door stile, a back-of-door rail, or a wall. On a hollow core door, hit the stile or use a mounting block, since the supplied screws want solid material to bite into. Keep in mind the 3 inch projection when the door swings past furniture or into a tight closet.

The CAHH35 is a coat and hat hook, a single decorative hook on a small brass base for hanging a coat, a bag, or a towel in a hall, bedroom, or bath. If you want two hanging points on one mounting base, that is a double hook, and options like the Emtek 2306 Sandcast Bronze Double Hook or the Orca Hardware 4854 Blakely Double Robe Hook fill that role. Pick the double where wall space is tight and two people share the spot; pick the single where you are running a row of hooks and want even spacing.

The Deltana CAHH35 is a hook only - it is a heavy-duty coat and hat hook with a 3 inch projection and a solid brass body, with no stop function. If the same piece needs to catch the door as well as hold a robe, the Trimco 7010 fOCAL Robe Hook and Stop is the peer built for that, combining both functions in one part. Ordering the CAHH35 for a back-of-door location where a bumper is also required means a separate stop on the order.

The CAHH35 is a standalone heavy-duty coat and hat hook chosen by finish rather than by suite, which is why it comes in eleven finishes including Brushed Nickel, Brushed Chrome and Unlacquered Brass. If the room is being built out from a matching collection, the peers are series-based: the Orca Hardware 2753 Cypress Robe Hook in the 27-Cypress Series, the Orca Hardware 3654 Swirl Robe Hook in the 36-Swirl Series, the Orca Hardware 4854 Blakely in the 48-Blakely Series, and the Orca Hardware 4954 Whidbey in the 49-Whidbey Series. Each of those has companion pieces in its own series; the CAHH35 is specified on finish match instead.

They mount the same way but they are not the same part. The Deltana CAHH35 is a heavy-duty coat and hat hook with a 3 inch projection on a 1-1/2 inch by 1-1/4 inch base, sized to carry a coat and a hat on the same body. The Emtek 2606, Emtek 25050, Orca 2753 Cypress and Orca 3654 Swirl are robe hooks - single-garment bath pieces. The Trimco 3070-1 is the peer that is also a coat and hat hook. If the order is for a coat closet or an entry, match to the coat and hat hooks; if it is for a bath, the robe hooks are the intended pieces.

The CAHH35 comes in Paint Black and Oil Rubbed Bronze, both over a solid brass body, so a deep scratch will eventually show brass. If you want the dark look on a different base metal, the Emtek 25050 Wrought Steel Robe Hook is a steel-bodied alternative.

Pricing and packaging are per hook, each one bagged separately with its screws, so a five-hook mudroom run means five units. Finish is chosen per unit, so nothing stops you ordering a mix, though for a run along one wall most people keep them uniform and match whatever the door hardware in the room already is.

The CAHH35 is solid brass with a smooth finished body in options such as Polished Brass and Oil Rubbed Bronze. For a textured or hand-worked look, the Emtek 2306 Sandcast Bronze Double Hook comes from Emtek's Sandcast Bronze Bath Hardware series, and the Emtek 2266 SELECT Knurled Tip Double Hook with Rosette carries a knurled tip and a separate rosette at the wall. Both are double hooks, so the swap also changes single-point capacity to two.