Deltana WDH15 Double Coat Hook

No. The WDH15 is a residential hook. For a school, a public restroom stall, a locker room, or any corridor where the hook takes abuse and has to meet a facility spec, look at a commercial coat and hat hook instead, such as the Trimco 3070-1. Deltana's WDH15 belongs in apartments, hotel rooms, and homes.

The Orca Hardware 4854 Blakely double robe hook and the Orca Hardware 4954 Whidbey double robe hook are both double-hook designs and each belongs to a full decorative suite - the 48-Blakely Series and the 49-Whidbey Series respectively - so the hook can be matched to towel bars and rings from the same series. The Emtek 2266 SELECT knurled tip double hook with rosette carries the same two-hook layout in the Select Bath Hardware series. The WDH15 is a 2-3/4 inch solid brass double hook offered in ten finishes including PVD Polished Brass, Oil Rubbed Bronze, Polished Nickel, Brushed Nickel, Antique Nickel, Paint Black, Polished Chrome, Brushed Chrome, Polished Brass and Antique Brass.

The WDH15 is a residential-duty solid brass coat and hat hook. For commercial and institutional openings, the Trimco 3070-1 coat and hat hook from the 3070 Series is the direct alternative, and the Trimco 7010 fOCAL robe hook and stop from the 7010 Series combines the hook with a door stop function in one wall-mounted piece - useful where a separate bumper would otherwise be specified. The Emtek 25050 wrought steel robe hook, from the Wrought Steel Bath Hardware series, is a steel-bodied single hook rather than a brass one.

Solid brass, both the body and the substrate. That matters in a bathroom or an entry that gets wet coats: brass won't rust the way a plated steel hook does once the finish gets chipped by a hanger. It also means the hook can be pulled down and rethreaded onto the same screw holes years later without the base crumbling.

A double hook like the WDH15 gives you two prongs at different heights on one mounting point, which is what you want behind a bedroom or bathroom door where a towel and a robe both need to hang, or in an entry where each person needs a coat and a bag on the same hook. A single robe hook has one prong and a smaller footprint, better when you're running several hooks in a row along a rail and want even spacing. If a single suits the job better, the Emtek 2606 solid brass robe hook and the Orca Hardware 2753 Cypress robe hook are single-prong options.

The WDH15 comes with matching screws sized for the hook, not with hollow-door anchors. On a hollow-core door you'll need to add a toggle or a hollow-door anchor at each screw location, or land the hook on the solid stile at the edge of the door. The hook itself is small at 2-3/4 inches, so the two mounting holes sit close together and often both fall within a door stile.

No - the WDH15 carries two hooks on one 2-3/4 inch body, so it hangs two garments from a single pair of screw holes. The Emtek 2606 solid brass robe hook, the Emtek 25050 wrought steel robe hook, the Orca Hardware 2753 Cypress robe hook and the Orca Hardware 3654 Swirl robe hook are all single-hook parts and will halve the hanging capacity per mounting point. If the double layout is what is needed, stay with a double: the Emtek 2306 sandcast bronze double hook, the Emtek 2266 SELECT knurled tip double hook with rosette, the Orca Hardware 4854 Blakely double robe hook or the Orca Hardware 4954 Whidbey double robe hook.

The Emtek 2306 sandcast bronze double hook is a sandcast bronze piece from the Sandcast Bronze Bath Hardware series, which gives it a rougher cast surface than the machined solid brass body of the WDH15. The Emtek 25050 wrought steel robe hook, in the Wrought Steel Bath Hardware series, is a forged steel single hook for the same kind of interior. The WDH15 is solid brass at 2-3/4 inches and ships in individual poly bags with matching screws.

The Emtek 2606 solid brass robe hook, in the Traditional Bath Hardware series, is the brass-bodied alternative, though it is a single hook rather than a double. For a brass double hook from another brand, the Emtek 2266 SELECT knurled tip double hook with rosette in the Select Bath Hardware series keeps the two-hook layout. The WDH15 itself is solid brass in both body and substrate.

For a non-brass body, the Emtek 25050 wrought steel robe hook is a steel option, though it's a single hook rather than a double. If you want to stay with a double prong, the Orca Hardware 4854 Blakely and 4954 Whidbey are both double robe hooks, and the Emtek 2306 is a sandcast bronze double hook. The Deltana WDH15 itself is solid brass all the way through, including in the paint black finish.

The WDH15 is sold by the each, one hook per poly bag with its own screws, so you order the exact count you need rather than a fixed carton quantity. For a multi-family turn where every unit gets the same hardware, that means a straight per-door count, and each bag arriving separately packed keeps the finish from getting scuffed in transit.