Deltana TSPE200 Extended T-Strike, 2-3/4" x 2"

No. The TSPE200 is a latch strike with an extended lip, built for the spring latch on a residential lockset. A deadbolt needs a dedicated deadbolt strike with a deeper pocket, like the Emtek 83223 square-corner deadbolt strike plate or the Kwikset 80318 full round adjustable strike. If you want the bolt boxed out behind the jamb, the Kwikset 81640 strike box or the Kwikset 81231-001 metal strike dust box does that job.

Measure the plate cut in your jamb before ordering. The TSPE200 face is 2-3/4 x 2 inches, which is the common T-strike footprint on residential latch prep. If your existing plate is a full-lip ASA or square-corner deadbolt strike, the mortise will not match and you will be patching the jamb.

The lip is the curved tongue that projects past the jamb and rides the latch in as the door closes. At 1-1/2 inches, the TSPE200 reaches further than a standard strike lip, which is what you want when the jamb is set back from the door face, when trim or a thick casing puts the latch out past the plate, or when the latch is dragging on the jamb edge instead of riding up onto the strike.

They serve different parts of the lock. The TSPE200 is an extended T-strike measuring 2-3/4 inches by 2 inches with a 1-1/2 inch lip extension, made of solid brass, and it is the replacement strike for residential latch locks. The Emtek 83223 is a standard deadbolt strike plate with square corners. If you are replacing the strike that catches a spring latch, the T-strike shape is what you want; if you are replacing the plate the deadbolt throws into, the 83223 is the deadbolt part.

The TSPE200 is a fixed extended T-strike, 2-3/4 inches by 2 inches with a 1-1/2 inch lip extension, so its lip and opening land where the plate is mortised. When the existing jamb prep does not line up, the Kwikset 80318 full round adjustable strike and the Kwikset 81825 6 way adjustable deadlatch are the adjustable options, both deadbolt strike plates. Choose the fixed brass T-strike when you are matching an existing mortise and want a brass finish, and an adjustable strike when the alignment is what you are solving for.

Three: oil rubbed bronze, brushed nickel, and polished brass. If you are matching a fleet of doors, pick the finish off the lockset already installed rather than off the hinges, since strike and lockset sit in the same sightline at the latch.

Only if the misalignment is horizontal, meaning the latch is landing short of the strike opening toward the door face. The longer 1-1/2 inch lip picks the latch up in that direction. If the latch is high or low against the plate, the TSPE200 will not correct it, and an adjustable strike like the Kwikset 81825 six way adjustable deadlatch is built for that kind of movement.

The TSPE200 is a 2-3/4 inch by 2 inch extended T-strike sized as a replacement for residential lock prep. For an ASA prep, the Codelocks ASA strike plate in stainless steel is the strike cut for that shape. Match the strike to the prep already routed in the jamb rather than to the lock brand.

The TSPE200 is the visible solid brass strike plate itself, 2-3/4 inches by 2 inches with a 1-1/2 inch lip extension. The parts that line the pocket behind the jamb are separate items: the Kwikset 81231-001 metal strike dust box and the Kwikset 81640 strike box. If the deadbolt pocket in your jamb needs lining as well as a face plate, order the box as its own line.

The Deltana TSPE200 extended T-strike is solid brass and comes in Polished Brass, Oil Rubbed Bronze, and Brushed Nickel, so it can be finish-matched to the rest of the trim on the door. The Codelocks ASA strike plate is offered in a stainless steel finish. Where the strike is visible on the jamb and the building standard is a brass or bronze family, the brass T-strike is the one that matches; where the opening is already stainless, the ASA plate stays in that family.

Solid brass holds its finish where a plated stamping wears through at the lip, which is the part the latch scrapes every cycle. That matters on high-traffic residential openings where the strike is visible. The TSPE200 is solid brass throughout, so the finish is on brass rather than over steel.