DEWALT ¼” & 5/16 Socket, 3/8 & 7/16 Socket, 6” Extension
Features
- IMPACT READY: ¼ inch hex shank stands up to the power of impact drivers
- 4-IN-1 FUNCTIONALITY: Get jobsite convenience with onboard storage that offers 4-in-1 versatility
- MAXIMIZE ACCESSIBILITY: 6 in. extension allows access to hard-to-reach places
- DURABLE DESIGN: Detachable sockets allow for the quick removal of metal shavings to help promote long life.
Prop 65
- No
Manufacturer Resources
Product Specs
- Battery Test Summary:
- DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
- Bit Size:
- 6” 4-in-1 Double Ended Nut Driver (SAE)
- Bit Type:
- Hex
- Chuck Size:
- Not Applicable
- Country Of Origin:
- Taiwan
- Head Style:
- Hex
- Individual Vs Set Syndigo :
- INDIVIDUAL
- Power Source:
- NON-ENERGY USING
- Product Height:
- 0.8 in
- Product Length:
- 7.9 in
- Product Primary Material:
- High Speed Steel
- Product Weight:
- 0.24 lbs
- Product Width:
- 2.9 in
- Prop 65 Generic Warning:
- No
- Shank Diameter:
- 1/4 in
- Unit Of Measure:
- SAE
- Department:
- Electrical
DEWALT DWADENDEXT-2 – Frequently Asked Questions
1) Will the DEWALT DWADENDEXT-2 nut driver fit a cordless impact driver chuck?
Yes. The DWADENDEXT-2 has a 1/4 inch hex shank, which drops straight into the quick-change collet on a cordless impact driver, and DEWALT rates it Impact Ready for that use. It is also fine in a standard drill chuck or a 1/4 inch hex bit holder.
2) What socket sizes does the DWADENDEXT-2 cover, and are they metric or SAE?
Four SAE sizes in one tool: 1/4 and 5/16 inch on one double-ended socket, 3/8 and 7/16 inch on the other. There are no metric sizes here, the unit of measure is SAE. Those four are the common sizes for hex-head self-drilling screws and sheet metal screws, so it covers most strut, duct and panel work without swapping bits.
3) Is the 6 inch extension long enough to reach hex screws down inside a stud bay or junction box?
The extension is 6 inches, which is what gets the driver past an obstruction and onto a screw head recessed in a bay, behind strut, or inside an enclosure. Overall the tool measures 7.9 x 2.9 x 0.8 inches and weighs 0.24 lbs, so it is short enough to keep on your belt pouch rather than in the van.
4) How do you change between the four sizes on the DEWALT 4-in-1 nut driver?
The two double-ended sockets are detachable and store onboard the extension, so you pull a socket, flip it or swap it, and reseat it. Nothing else is required and no loose adapters to lose. Detaching them also lets you dump out the metal shavings that collect in the socket when you are driving self-tappers overhead.
5) Is this one nut driver or a multi-piece set in a case?
The DWADENDEXT-2 is sold as a single item, not a boxed set. What you get is the 6 inch extension with the two double-ended sockets carried on the tool itself, giving four sizes in one piece. If you need a full socket index for a bench, this is not that, it is a pocket tool for screw-gun work.
6) What is the DEWALT DWADENDEXT-2 made of, and will it hold up to daily impact-driver use?
High speed steel, which is the harder tool steel used where a socket is spinning under impact and dry-running against screw heads. Combined with the Impact Ready 1/4 inch hex shank, it is built for repeated impact driver duty rather than hand-ratchet work. Country of origin is Taiwan.
7) Does the DWADENDEXT-2 carry a California Prop 65 warning?
No Prop 65 warning applies to the DWADENDEXT-2 nut driver. That matters if you are supplying tools to a California jobsite or a government or school account that screens for it.
8) What part number should I order for the DEWALT 6 inch 4-in-1 double ended nut driver?
DEWALT MPN DWADENDEXT-2. There is one configuration only, so there is no finish, size or pack option to specify when you order.
How fast can I get the DEWALT DWADENDEXT-2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DEWALT DWADENDEXT-2 come with a warranty?
Absolutely. The DEWALT DWADENDEXT-2 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DEWALT DWADENDEXT-2?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the DEWALT DWADENDEXT-2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.