You may also like
DEWALT Calk-In 3/8 X 16
Features
- Manufactured by DEWALT
- Shallow embedment
- Internally threaded anchor for easy removability of attachment and service work
- Readily accepts machine bolts
Manufacturer Resources
Product Specs
- Battery Included:
- No
- Country Of Origin:
- Vietnam
- Fastener Length:
- 16
- Individual Vs Set Syndigo :
- INDIVIDUAL
- Net Lit Ion Y N:
- No
- Power Source:
- NON-ENERGY USING
- Product Category:
- Anchors
- Product Diameter Us:
- 3/8 IN
- Product Finish:
- Zinc
- Product Primary Material:
- Alloy Steel
- Product Weight:
- 0.095 lbs
- Use With:
- Light Duty Anchoring
- Department:
- Electrical
DEWALT 09230-PWR – Frequently Asked Questions
1) What size bolt does the DEWALT 09230-PWR Calk-In anchor take?
The 09230-PWR Calk-In is a 3/8 inch internally threaded anchor, so it accepts a 3/8-16 machine bolt threaded straight into the body. Because the threads are internal, the bolt can be backed out and reinstalled later for service work without disturbing the anchor set in the concrete.
2) Is the Calk-In 3/8 anchor a deep-embedment anchor or a shallow one?
Shallow embedment. The Calk-In is set near the surface of the concrete, which is why it suits light duty anchoring rather than structural loads. If your drawing calls for a deep-embedment or heavy-duty mechanical anchor, this is not the part for it.
3) Does the DEWALT 09230-PWR come with the bolt?
No bolt is supplied. The 09230-PWR is sold as the anchor only, as an individual item, so order the 3/8-16 machine bolts and any washers separately in the length your fixture and standoff require.
4) Can I remove the bolt from a Calk-In anchor later without pulling the anchor out?
Yes. The internal thread means the attachment bolt is a separate piece, so you can unbolt a fixture, service it, and bolt it back into the same anchor. That is the main reason maintenance crews choose an internally threaded anchor over a wedge or sleeve anchor, where the stud stays in the hole permanently.
5) Will a zinc Calk-In anchor hold up in a damp or outdoor location?
The 09230-PWR body is alloy steel with a zinc finish, which is a dry interior or protected specification. Zinc plating gives limited corrosion resistance, so for exterior, wet, or washdown areas choose a stainless or hot dip galvanized anchor instead.
6) What does the 16 in 3/8 x 16 mean on this DEWALT anchor?
It is the thread pitch, 16 threads per inch, which is the standard coarse thread for a 3/8 inch bolt. So the anchor takes a 3/8-16 machine bolt, not a fine thread one. The fastener length value on the record is 16, matching that thread designation rather than a physical inch length.
7) Is the Calk-In anchor a powder actuated or battery tool product?
Neither. It is a non-energy using mechanical anchor with no battery, set with hand tools in a drilled hole. Nothing is included in the way of a setting tool or power source, so pair it with the correct diameter masonry bit and a setting punch on the truck.
How fast can I get the DEWALT 09230-PWR delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DEWALT 09230-PWR come with a warranty?
Absolutely. The DEWALT 09230-PWR is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DEWALT 09230-PWR?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the DEWALT 09230-PWR from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.