Klein Tools 935DAF Digital Ang...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$103.56
$44.89
Klein Tools 935DAF Digital Angle Finder

Klein Tools 935DAF Digital Angle Finder

(No reviews yet) Write a Review

Model: 935DAF
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$103.56
$44.89
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Digital Angle Finder

  • Features

    • Compact design that is easy to store and carry around in pockets
    • Powered by a single AAA battery for an extended working life time
    • Durable, rust resistant metallic ruler with deeply etched markings for long lasting clear readings
    • Bright white LED display provides easy visibility in all lighting conditions
    • Wide locking knob is easy to twist and firmly locks the rulers in place
    • Machined ruler edges measure inside and outside angles with an accuracy of +/- 0.2-Degree
    • Efficient digital miter saw protractor function calculates the needed saw blade angle to cut miter joints with a perfect fit every time
    • Precision Machined Edges, Reverse Contrast Display, Digital Miter Saw Protractor Calculator
    • 3-in-1 Digital Angle Finder provides precision measurements for inside and outside angles, lengths, and calculates simple miter cut angles

  • Warnings

    • Always wear approved eye protection


935DAF - spec sheet

Manufacturer Resources

Product Specs

Accuracy:
+/- 0.2°
Batteries:
1 x AAA
Drop Protection:
6.6' (2 m)
Ingress Protection:
IP54
Low Battery Alarm:
No
Overall Height:
0.9" (2.3 cm)
Overall Length:
8.5" (21.6 cm)
Overall Width:
1.4" (3.6 cm)
Department:
Electrical
Product Group:
Tool Sets
Product Subgroup:
Tool Kits
Product Type:
Digital Angle Finder
Product Details:
Digital Angle Finder
Product Height:
0.7400 in
Product Material:
Stainless Steel, ABS Plastic
Product Weight:
0.4100 lbs
Product Width:
1.3800 in
Product Depth:
8.5500 in

Klein Tools 935DAF – Frequently Asked Questions

1) How accurate is the Klein Tools 935DAF digital angle finder for miter work?
The 935DAF reads inside and outside angles to +/- 0.2 degrees off its machined ruler edges. It also runs a miter saw protractor calculation, so it converts the measured corner angle into the blade angle you set on the saw. For trim, casing, and duct corners that are rarely a true 90, that is the function that saves the recut.
2) Will the Klein 935DAF survive a jobsite drop or dusty conditions?
It is rated IP54 and carries a 6.6 foot (2 m) drop rating. IP54 covers dust ingress protection and water splashing from any direction, so sawdust, drywall dust, and light rain are within spec. Body is stainless steel and ABS plastic, and the ruler is rust resistant with deeply etched markings rather than printed ones.
3) How big is the Klein 935DAF angle finder folded, and will it fit in a tool pouch?
Folded it measures 8.5 inches long, 1.4 inches wide, and 0.9 inches high, and weighs 0.41 lbs. That is pocket or pouch size for an electrician or trim carpenter, but it also sets the practical limit on the work: the legs are 8.5 inch rulers, so for laying out long runs you are transferring the angle rather than measuring the full length.
4) What battery does the Klein 935DAF take, and does it warn you when it is low?
One AAA battery runs it. There is no low battery alarm, so the display simply gets you to the end of the job without a warning first. If the tool lives in a van and gets used occasionally, carry a spare AAA rather than relying on a prompt.
5) Does the Klein 935DAF hold the angle once you set it, so you can carry it to the saw?
Yes. A wide locking knob twists to clamp both rulers in position, so the measured angle stays put while you walk it to the miter saw or scribe against the work. Combined with the etched steel ruler edges, it doubles as a bevel gauge and a straightedge.
6) Is the 935DAF just an angle gauge, or does it measure length too?
Three functions in one: inside and outside angles, lengths off the machined ruler edges, and a miter cut calculation. So for a property maintenance tech or remodeler it replaces a separate protractor, a bevel, and a short rule on trim, conduit bend layout, and framing corner checks.
7) Can you read the Klein 935DAF display in a dark mechanical room or in direct sun?
It uses a bright white LED reverse contrast display, which is the point of the design: readable in a dim crawlspace or panel room as well as outdoors. No backlight button to hunt for.
8) What is the Klein part number and UPC for the digital angle finder?
Klein Tools 935DAF is the manufacturer part number, UPC 92644860010. It ships as a single model with no finish or size options to specify.
How fast can I get the Klein Tools 935DAF delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 935DAF come with a warranty?
Absolutely. The Klein Tools 935DAF is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 935DAF?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 935DAF from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!