DiodeLED DI-TB-CONNECTOR-TTW T...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3.64
DiodeLED DI-TB-CONNECTOR-TTW Tape-to-Wire Terminal Block Connector, 12/24V DC

DiodeLED DI-TB-CONNECTOR-TTW Tape-to-Wire Terminal Block Connector, 12/24V DC

(No reviews yet) Write a Review

Model: DI-TB-CONN-TTW

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3.64
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

DiodeLED DI-TB-CONNECTOR-TTW Tape-to-Wire Terminal Block Connector, 12/24V DC

The DiodeLED DI-TB-CONNECTOR-TTW is a tape-to-wire terminal block connector engineered for 12/24-Volt DC LED tape light installations. This connector provides a secure, solder-free transition point between low-voltage LED tape light runs and standard hookup wire, allowing installers to extend, splice, or terminate LED tape circuits without damaging the flexible tape substrate. Rated for 12/24-Volt DC operation, the DI-TB-CONNECTOR-TTW is built to work seamlessly within DiodeLED's broader tape light and low-voltage lighting ecosystem, making it a practical connection solution for both residential and commercial LED tape light projects.

Key Features

  • Tape-to-Wire Configuration: Designed specifically to bridge LED tape light runs to standard lead wire, simplifying connections in tight or awkward installation spaces.
  • Low-Voltage DC Rating: Rated for 12/24-Volt DC operation, matching the electrical requirements of most DiodeLED tape light products for safe, reliable low-voltage connections.
  • Terminal Block Design: Terminal block construction allows for a solder-free, mechanical connection that speeds up installation and reduces the risk of damaging sensitive LED tape circuitry during termination.
  • Compatible with Diode LED Tape Systems: Purpose-built to integrate with DiodeLED tape light product lines, supporting consistent, brand-matched low-voltage lighting installations.
  • Simplified Field Wiring: Enables electricians and lighting installers to connect tape runs to hardwired power sources or extension leads quickly and reliably in the field.

Technical Specifications

  • Voltage Rating: 12/24-Volt DC
  • Connector Type: Tape-to-Wire Terminal Block Connector
  • Model: DI-TB-CONNECTOR-TTW

Typical Applications

  • LED Tape Light Installation and Extension
  • Low-Voltage Cove and Accent Lighting Projects
  • Under-Cabinet and Task Lighting Wiring
  • Commercial and Residential Tape Light Retrofits
  • Field Termination of LED Tape to Power Leads

Why DiodeLED?

DiodeLED designs connection components like the DI-TB-CONNECTOR-TTW to work in concert with its tape light systems, giving installers a dependable, purpose-matched way to terminate and extend 12/24-Volt DC LED tape runs. Choosing a DiodeLED connector for a DiodeLED tape system helps ensure electrical compatibility and a cleaner, more reliable low-voltage lighting installation.

Manufacturer Resources

Product Specs

list_batch:
DIO-20260924
Product Type:
Terminal Block Connector
Voltage Rating:
12/24V DC
Configuration:
Tape-to-Wire
Department:
Electrical
Product Subgroup:
Wire Connectors
Product Group:
Wire Connectors & Terminals

DiodeLED DI-TB-CONN-TTW – Frequently Asked Questions

1) What does the DiodeLED DI-TB-CONNECTOR-TTW connector actually do on a tape light run?
It's a tape-to-wire terminal block, so it joins the end of an LED tape light run to standard hookup wire. You strip the lead wire, clamp it in the terminal block, and seat the tape's copper pads - no soldering iron and no heat on the tape substrate. Use it where a tape run has to reach back to a driver, a power lead, or an extension cable.
2) Will this connector work on 24V LED tape, or is it 12V only?
Both. The DI-TB-CONNECTOR-TTW is rated 12/24V DC, so it covers either low-voltage tape system. It is a DC low-voltage component only - do not put it on a line-voltage circuit.
3) Do I need a tape-to-wire connector or a tape-to-tape connector for my job?
Depends which side of the joint you're on. Tape-to-wire, which is what the DI-TB-CONNECTOR-TTW is, is for getting from a tape run to hookup wire - feeding power in from a driver, or jumping a gap with wire between two runs. If you're butting two pieces of tape directly end to end with no wire between them, that's a tape-to-tape connector instead, not this part.
4) Can I use this on DiodeLED tape light, and will it keep the system brand-matched?
It's built for DiodeLED tape light product lines, so the connection geometry and the 12/24V DC rating line up with DiodeLED's low-voltage tape systems. For a spec job where the whole run is DiodeLED, this keeps the termination on the same brand as the tape and driver.
5) Is this the right way to terminate tape light in a tight cove or under a cabinet?
That's the typical use. Cove, under-cabinet and task lighting rarely leave room to work a soldering iron, and a mechanical terminal block lets you make the joint in place and then feed wire out of the channel. It also suits retrofit work where you're picking up an existing tape run and taking it back to a new power lead.
6) What is the exact part number to order for the DiodeLED tape-to-wire terminal block?
Order DI-TB-CONN-TTW. The catalogue designation also appears written out as DI-TB-CONNECTOR-TTW; it is the same single 12/24V DC tape-to-wire terminal block, with no finish, length or voltage choices to specify.
7) Does using a terminal block connector risk damaging the LED tape?
Less than soldering does. The joint is mechanical, so there's no heat applied to the flexible tape substrate and no chance of lifting a pad with an iron. That's the main reason installers reach for a terminal block when they're splicing or terminating tape in the field.
How fast can I get the DiodeLED DI-TB-CONN-TTW delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DiodeLED DI-TB-CONN-TTW come with a warranty?
Absolutely. The DiodeLED DI-TB-CONN-TTW is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DiodeLED DI-TB-CONN-TTW?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the DiodeLED DI-TB-CONN-TTW from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!