Don-Jo 11 Cast Door Pull — 5-1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$48.15
Don-Jo 11 Cast Door Pull — 5-1/2" CTC, 6-1/8" Overall, 2" Projection

Don-Jo 11 Cast Door Pull — 5-1/2" CTC, 6-1/8" Overall, 2" Projection

(No reviews yet) Write a Review

Model: 11-629
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$48.15
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 11 Cast Door Pull — 5-1/2" CTC, 6-1/8" Overall, 2" Projection

The Don-Jo 11 is a commercial-grade cast door pull engineered for durability and professional appearance in demanding door hardware applications. Featuring a 5-1/2" center-to-center (CTC) spacing, 6-1/8" overall length, 2" projection, 1-3/8" clearance, and a 5/8" diameter grip, this pull delivers a solid, ergonomic feel suited to high-traffic commercial environments. Compliant with ANSI J401, the Don-Jo 11 is available in six finishes — 605, 606, 613, 628, 629, and 630 — to coordinate with a wide range of door hardware specifications.

Key Features

  • Precise Dimensional Specifications: 5-1/2" center-to-center (CTC) spacing and 6-1/8" overall length provide consistent, professional installation alignment on commercial doors.
  • Comfortable Grip Geometry: 5/8" diameter grip with 1-3/8" clearance and 2" projection ensures ergonomic, easy-to-grasp operation for all users.
  • Cast Construction: Manufactured from cast material for a solid, heavy-duty feel that withstands the rigors of commercial use and high-traffic door applications.
  • Broad Finish Selection: Available in six finishes — 605, 606, 613, 628, 629, and 630 — allowing seamless coordination with existing door hardware and architectural aesthetics.
  • ANSI J401 Compliance: Meets ANSI J401 standards, ensuring the product conforms to recognized industry specifications for door pull hardware.
  • Commercial-Grade Application: Designed and rated for commercial use, making it appropriate for office buildings, educational facilities, healthcare institutions, and other demanding environments.
  • Convenient Shelf Pack: Sold individually (shelf pack of 1) for straightforward procurement and inventory management.

Certifications & Compliance

  • ANSI J401 Compliant
  • Commercial Grade

Technical Specifications

  • Product Group: Door Trim and Accessories
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Type: Door Pulls
  • Subcategory: Pulls and Push Plates
  • Commercial/Residential: Commercial
  • Product Model: 11
  • Product Projection: 2"
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo 11?

The Don-Jo 11 cast door pull delivers professional-grade reliability through its solid cast construction, precise dimensional engineering, and ANSI J401 compliance. With six available finishes and a design purpose-built for commercial applications, it provides the consistent performance and aesthetic flexibility that demanding door hardware projects require.

Product Specs

Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Door Pulls
Subcategory:
Pulls and Push Plates
Commercial/Residential:
Commercial
Clearance:
1-3/8"
ANSI/BHMA:
J401
Product Model:
11
(CTC) Center-to-Center:
5-1/2"
Product Size:
6-1/8"
Product Diameter:
5/8"
Product Projection:
2"
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Don-Jo 11-629 – Frequently Asked Questions

1) Is there enough hand clearance on the Don-Jo 11 pull for a gloved hand?
1-3/8 inches of clearance between the grip and the door face, with a total projection of 2 inches. That is enough for a bare hand or a light work glove, but it is tight for heavy winter gloves. If your crew is pulling doors in gloves all day, look at a pull with more standoff such as the Ives 8102HD, which is listed with 1-1/2 inch clearance.
2) Is a 5/8 inch diameter pull grip too thin for a high-traffic commercial door?
The Don-Jo 11 uses a 5/8 inch diameter cast grip, which is on the slimmer side of commercial pulls. It suits interior office, retail, and multi-tenant doors where the pull sees frequent but light use. On an entrance or a heavy stairwell door that gets yanked hard all day, a thicker bar carries the abuse better: the ABH AB3300 is a 1 inch diameter pull, the ABH AB7200 is 7/8 inch solid stainless with through-bolt mounting, and the Ives 8103HD is a 1 inch round heavy duty pull.
3) What is the closest equivalent to a Don-Jo 11 cast door pull if a heavier grip bar is wanted?
The Don-Jo 11 is a cast pull with a 5/8" diameter grip, 5-1/2" center-to-center, 6-1/8" overall length and 2" projection. For a thicker bar in the same straight-pull format, the Ives 8102HD is a heavy duty straight door pull with a 3/4" round bar and 1-1/2" clearance, and the Ives 8103HD is a heavy duty straight pull with a 1" round bar and through-bolt mounting. The ABH AB3300 is a straight flat end commercial pull at 1.00" diameter. All four are straight-bar door pulls; the grip diameter and mounting method are what separate them, so a facility standardizing on a single feel should pick by bar size.
4) The opening needs an ADA compliant pull instead of a straight cast pull. What should be used?
The Ives 8145 EZ series is a 45 degree offset door pull with heavy duty mounting hardware and is ADA compliant. The Don-Jo 11 is a straight cast pull with a 5/8" grip and 1-3/8" clearance, so where the specification on the drawing calls out ADA compliance for the pull itself, the 8145EZHD is the item that carries that claim.
5) Which pulls look like a substitute for the Don-Jo 11 but will not work in the same opening?
Several items in the same family are not interchangeable with a 6-1/8" pull on 5-1/2" centers. The Cal-Royal PUL-175 is a night latch cylinder pull at 3-1/2" height, made to sit around a rim cylinder rather than serve as a general grab pull. The Trimco 1001-1 is a 3" x 12" push plate and the Trimco 1041 is an 8" x 16" half-round push plate, both flat plates with no grip. The Trimco 1070 series is a 3-1/2" x 15" classic push/pull plate, a plate-mounted assembly rather than a bare pull. The Trimco 1035 Ultimate Restroom Pull is built for the restroom door application specifically. Ordering any of these against a Don-Jo 11 line item gives a different part on the door.
6) What finishes does the Don-Jo 11 cast door pull come in?
Six finishes: 605 polished brass, 606 satin brass, 613 oil rubbed bronze, 628 satin aluminum, 629 bright stainless steel, and 630 satin stainless steel. For matching a building already standardized on aluminum storefront trim, 628 is the usual pick; for stainless lever and push plate hardware, 630 is the common match. Ordering the same model across a floor keeps every opening on one CTC and one finish code.
7) Should I use a straight pull like the Don-Jo 11 or an offset pull?
A straight pull like the 11 mounts both posts in line on 5-1/2 inch centers and gives you a short, compact grip, which works where the pull sits beside a lock or in a narrow stile and you do not need much reach. Offset pulls stand the grip out at an angle so the hand clears the frame or a push bar, and they are the better call on ADA-driven openings and on doors where the pull shares the stile with other trim. Offset options include the ABH AB3310 flat end, the ABH AB3330 round end, and the Ives 8145 45 degree offset in the ADA compliant EZ series.
8) Is the Don-Jo 11 a handed pull, and do I need to order left or right?
No handing to specify. The 11 is a symmetrical straight pull on 5-1/2 inch centers, so the same part goes on a left hand or right hand door and the only choice on the order is finish. Decorative pulls are where handing shows up, for example the Emtek Lost Wax Cast Bronze Art Nouveau 8 inch pull is ordered with handing selected. For a fleet of doors that means one line item for the whole building.
9) Can I put the Don-Jo 11 pull back to back on both sides of a door?
The 11 is sold as a single pull, one per package, so a back to back application means ordering two and mounting them to matching preps on each face. If you want a factory back to back set that ships as a pair with the fasteners sized for it, the Deltana OHP620 offset handle pull is a back to back set rated for 1-1/8 to 1-3/8 inch doors, and Deltana also lists the SSPOBB24 and SSPORBB24 24 inch back to back pulls.
10) Is a 6-1/8 inch pull long enough for a full height glass or aluminum entrance door?
Not for the full height look. At 6-1/8 inches overall on 5-1/2 inch centers, the Don-Jo 11 is a hand-sized grab pull for interior and service doors, not an entrance ladder pull. For a storefront or glass entry where the pull runs a foot or more, the Deltana SSP1210 is a 12 inch single side contemporary pull, and the SSPOBB24 is a 24 inch back to back set. Match the entrance pull length to what is already on the adjacent leaf so the pair reads the same.
11) Do I need a push plate to go with the Don-Jo 11 pull on a push-pull door?
Yes, on a push-pull opening the pull handles the pull side and you still need trim on the push side. The Don-Jo 11 is the pull only. Common push side partners include the Trimco 1001-1 heavy duty push plate at 3 by 12 inches, the Trimco 1041 half-round push plate at 8 by 16 inches, and the Trimco 1070 Series classic push and pull plates at 3-1/2 by 15 inches. Size the plate to your stile width before you order.
12) What is the difference between a Don-Jo 11 and an offset pull like the ABH AB3310 or Ives 8169?
The Don-Jo 11 is a straight cast pull, 6-1/8" overall with 5-1/2" center-to-center and a 2" projection. The ABH AB3310 is an offset flat end pull handle for surface mount, the ABH AB3330 is an offset round end pull with custom length options, and the Ives 8169 is a C style offset solid pull at 1" diameter with heavy duty mounting. On an offset pull the grip is stepped away from the mounting posts rather than running parallel to them, which changes the hand position at the door and the hole pattern that has to be drilled, so an offset is not a drop-in for a straight 5-1/2" CTC prep.
13) A pair of pulls is needed back to back on a glass or narrow door. Is the Don-Jo 11 the right choice?
The Don-Jo 11 is a single commercial cast pull, 6-1/8" overall with a 2" projection. For a matched pair mounted back to back, the Deltana OHP620 is an off-set handle pull supplied as a back-to-back set for doors 1-1/8" to 1-3/8" thick, and the Deltana SSPOBB24 and SSPORBB24 are 24" back-to-back offset pulls in modern square and round profiles. The Deltana SSP1210 is a 12" contemporary pull for a single side. Back-to-back sets share through-bolts between the two sides, so the door thickness has to fall in the set's stated range.
14) Is there a stainless steel alternative to the Don-Jo 11 cast pull?
The Don-Jo 11 is offered in 629 bright stainless steel and 630 satin stainless steel finishes over its cast body. If solid stainless material is what the specification calls for rather than a stainless finish, the ABH AB7200 is a solid stainless steel flat end pull handle at 7/8" diameter with through-bolt mounting. The two differ in construction and in grip diameter, since the Don-Jo 11 grip measures 5/8".
15) Is the Don-Jo 11 pull suitable for a restroom door in a healthcare or school building?
It works as a general commercial pull and is used in healthcare, education, and government facilities, but it is a plain cast grip with a 5/8 inch bar. If the concern is hands-free egress from a restroom, a purpose-built option like the Trimco 1035 Ultimate Restroom Pull is heavy duty and made for that specific opening. For general classroom, office, and corridor doors in those same buildings, the 11 on 5-1/2 inch centers is the straightforward choice.
16) What is the Don-Jo 11 made of and will it hold up on a high-traffic door?
Cast construction, rated commercial rather than residential. Cast gives a solid one-piece grip with no hollow tube to flex or dent, which is what you want on doors that get pulled hundreds of times a day in offices, retail, and warehouses. The limit is the 5/8 inch bar diameter, so on abusive openings a heavier 1 inch pull is the better spend.
How fast can I get the Don-Jo 11-629 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 11-629 come with a warranty?
Absolutely. The Don-Jo 11-629 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 11-629?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 11-629 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!