Don-Jo 1152 Offset Door Pull —...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$77.16
$70.09
Don-Jo 1152 Offset Door Pull — 90° Offset, 2-1/2" Projection, 3/4" Diameter, 1-3/4" Clearance

Don-Jo 1152 Offset Door Pull — 90° Offset, 2-1/2" Projection, 3/4" Diameter, 1-3/4" Clearance

(No reviews yet) Write a Review

Model: 1152-628
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$77.16
$70.09
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 1152 Offset Door Pull — 90° Offset, 2-1/2" Projection, 3/4" Diameter, 1-3/4" Clearance

The Don-Jo 1152 is a commercial-grade offset door pull engineered for demanding door hardware applications. Featuring a 90-degree offset configuration with a 2-1/2" projection and 3/4" diameter bar, this pull provides a 1-3/4" clearance and an overall length of 12-3/4". Available in center-to-center (CTC) spacing options of 8", 10", and 12", the 1152 accommodates a variety of door configurations and is ANSI J402 compliant. Offered in five finishes — 605, 613, 628, 629, and 630 — it delivers both functional performance and aesthetic versatility for commercial installations.

Key Features

  • 90-Degree Offset Design: Offset-hung configuration provides ergonomic grip and proper hand clearance for smooth, comfortable door operation.
  • 2-1/2" Projection: Generous projection ensures adequate hand clearance from the door surface for ease of use in high-traffic commercial environments.
  • 3/4" Diameter Bar: Sturdy 3/4" diameter pull bar delivers a solid, professional feel suited for commercial-grade applications.
  • 1-3/4" Clearance: Provides sufficient clearance between the pull and door face for comfortable gripping and ADA-friendly ergonomics.
  • Flexible CTC Spacing: Available in 8", 10", and 12" center-to-center spacing options to accommodate a wide range of door sizes and mounting requirements.
  • Overall Length of 12-3/4": Full 12-3/4" overall length suits standard commercial door widths and provides a commanding visual presence.
  • Multiple Finish Options: Available in finishes 605, 613, 628, 629, and 630 to coordinate with existing door hardware and architectural aesthetics.
  • Commercial-Grade Construction: Designed and rated for commercial use, providing long-lasting durability in office, institutional, and retail environments.

Certifications & Compliance

  • ANSI J402 Compliant
  • ANSI/BHMA J401
  • Commercial Grade

Technical Specifications

  • Product Group: Door Trim and Accessories
  • Subcategory: Pulls and Push Plates
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Type: Door Pulls
  • Commercial/Residential: Commercial
  • Hang Type: Offset Hung
  • ANSI/BHMA: J401
  • (CTC) Center-to-Center: 12"
  • Product Size: 12 3/4"
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities and Schools
  • Healthcare Institutions and Medical Offices
  • Retail Establishments and Storefronts
  • Government and Municipal Buildings
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential and Mixed-Use Properties

Why Don-Jo 1152?

Don-Jo door pulls are built to meet the rigorous demands of commercial door hardware applications, with the 1152 offering a precise 90-degree offset configuration, a robust 3/4" diameter bar, and ANSI J402 compliance for verified performance standards. With flexible CTC spacing options and a broad selection of finishes, the Don-Jo 1152 is engineered to integrate seamlessly into professional installations where reliability and appearance both matter.

Product Specs

Product Group:
Door Trim and Accessories
Subcategory:
Pulls and Push Plates
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Door Pulls
Commercial/Residential:
Commercial
Hang Type:
Offset Hung
Clearance:
1-3/4"
ANSI/BHMA:
J401
Product Model:
1152
(CTC) Center-to-Center:
12"
Product Size:
12 3/4"
Product Diameter:
3/4"
Product Projection:
2-1/2"
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Don-Jo 1152-628 – Frequently Asked Questions

1) What is the closest equivalent to a Don-Jo 1152 offset door pull from Ives?
The Ives 8169 is a C style offset solid door pull with a 1 inch diameter and heavy duty mounting, which puts it in the same offset-pull role as the Don-Jo 1152. The 1152 uses a 3/4 inch diameter bar with a 2-1/2 inch projection and 1-3/4 inch clearance in an offset hung configuration. If you want the offset geometry with a slightly heavier bar in the hand, the 8169 is the swap; if you are matching an existing 3/4 inch bar profile on adjacent doors, stay with the 1152.
2) Which door pull has the same 3/4 inch bar as the Don-Jo 1152 but mounts straight instead of offset?
The Ives 8102HD is a heavy duty straight door pull with a 3/4 inch round bar and 1-1/2 inch clearance. It carries the same 3/4 inch bar feel as the Don-Jo 1152 but runs straight rather than the 1152 offset hung configuration with its 2-1/2 inch projection. On a storefront or office door where the offset leg would crowd a frame, mullion, or adjacent lock trim, the straight 8102HD keeps the same grip diameter with a shorter 1-1/2 inch clearance off the door face.
3) I need a pull for both sides of a glass or wood entry door. Does the Don-Jo 1152 come as a back-to-back set?
The Don-Jo 1152 is specified as a single offset hung pull, 12-3/4 inch overall with 12 inch center-to-center. If the opening needs matched pulls on both faces as a set, the Deltana SSPORBB24 is a 24 inch back-to-back round offset door pull, and the Deltana SSPOBB24 is a 24 inch back-to-back modern offset pull. For a push side plate paired with a pull side, the Trimco 1070 Series classic push and pull plates come in a 3-1/2 inch by 15 inch size.
4) Is a 90 degree offset pull like the Don-Jo 1152 better than a straight pull for a heavy entrance door?
An offset pull gives you a grip that runs parallel to the door with the hand set away from the face, so you pull square instead of raking your knuckles across the door. The 1152 is offset hung with a 2-1/2 inch projection and 1-3/4 inch of clearance behind the 3/4 inch bar, which is enough room for a gloved hand. A straight pull, like the Ives 8102HD with its 3/4 inch round bar, sits closer to the face and is the simpler choice on lighter interior doors or where the pull has to stay flush-looking. On a heavy exterior or high-traffic entrance, the offset is what people reach for.
5) Does the Don-Jo 1152 give enough hand clearance for an ADA-compliant pull?
Clearance behind the 1152 bar is 1-3/4 inches, with the bar itself 3/4 inch in diameter and the offset legs carrying it 2-1/2 inches off the door face. That is a graspable round bar with room behind it for a full hand, no tight pinch against the door. The pull also carries an ANSI/BHMA J401 designation. Grip geometry is only part of an ADA opening, though, since operating force and approach clearances are set by the closer and the layout, not the pull.
6) What ANSI designation does the Don-Jo 1152 pull carry, and does that matter for a school or hospital spec?
The 1152 is an ANSI/BHMA J401 pull, and the description also calls out ANSI J402 compliance. For an institutional spec that names a J-series pull, that designation is what the reviewer is looking for on the submittal. It is a commercial-rated pull, which is the other line item facility specs tend to check.
7) I need matching pulls on both sides of a pair of glass doors. Can I use the Don-Jo 1152?
The 1152 is a single pull, ordered one per side, so a pair of doors pulled from both faces means four. All four are the same CTC 12 inch bar in whichever finish you pick, so they will match across the openings without any handing to sort out. An offset pull is symmetrical top to bottom in this configuration. If you specifically want a factory back-to-back set rather than individual pulls, the Deltana SSPORBB24 is a back-to-back round offset pair.
8) Is the Don-Jo 1152 heavy enough for a warehouse or industrial door, or should I step up?
The 1152 is a commercial-rated pull on a 3/4 inch bar, which is standard commercial section and fine for office, school, healthcare, and retail traffic. Where a door takes real abuse, pallet jacks, loading dock use, doors that get kicked, a heavier bar is worth the money: the Ives 8103HD is a heavy duty straight pull in 1 inch round with through-bolt mounting, and the ABH AB7200 is a solid stainless flat end pull at 7/8 inch diameter, also through-bolted. Through-bolting is what keeps a pull on an abused door, more than the bar diameter does.
9) Is the ABH AB3330 a substitute for a Don-Jo 1152 offset pull?
The ABH AB3330 Series is an offset round end pull offered with custom length options, so it covers the same offset pull application as the Don-Jo 1152. The difference is how you order: the 1152 is a fixed 12-3/4 inch overall pull with 12 inch center-to-center, while the AB3330 is specified by the length you need. For a one-for-one replacement of an existing 12 inch CTC pull, the 1152 lands without a takeoff; for a run of doors with nonstandard hole spacing already drilled, the custom length AB3330 lets you hit the existing holes.
10) The Cal-Royal PUL-175 and Trimco 1035 come up when I search door pulls. Are they interchangeable with a Don-Jo 1152?
No, they answer different problems. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height, stainless steel construction, meant to sit around a rim cylinder on a night latch door, not to serve as the main grip. The Trimco 1035 is the Ultimate Restroom Pull, a heavy duty pull for restroom door use. The Don-Jo 1152 is a general purpose commercial offset hung pull with a 3/4 inch bar and 12 inch center-to-center. Order the PUL-175 or 1035 only when the opening is the specific one they are built for.
11) What should I put on the push side of a door where the Don-Jo 1152 is the pull?
The Don-Jo 1152 is the pull side hardware, a 12-3/4 inch offset hung pull. For the push side, the Trimco 1001-1 is a heavy duty push plate at 3 inch by 12 inch, the Trimco 1041 is a half-round push plate at 8 inch by 16 inch for wider hand coverage on high traffic doors, and the Trimco 1070 Series classic push and pull plates run 3-1/2 inch by 15 inch if you want the push and pull plates matched as a set. Pick the plate width to the traffic and the finish to whatever you are matching on the pull.
12) Which finish of the Don-Jo 1152 will hold up best on a high-traffic exterior door?
Four finishes are available on the 1152: 605 polished brass, 613 oil rubbed bronze, 628 satin aluminum, and 630 satin stainless steel. On a heavily used exterior or service entrance, 630 satin stainless is the one that hides handprints and wear, and 628 satin aluminum is the usual match for a clear-anodized aluminum storefront. 613 oil rubbed bronze is a living finish that will change with handling, and 605 polished brass shows fingerprints fast, so both are better suited to lower-traffic or appearance-driven openings.
13) I have a push-pull setup. What pairs with the Don-Jo 1152 on the push side?
A pull like the 1152 goes on the pull face and a plate goes on the push face. The Trimco 1001-1 is a 3 by 12 inch heavy duty push plate, which reads proportionally against a 12-3/4 inch pull. The Trimco 1041 is a half-round push plate at 8 by 16 inches if you want more coverage on a door that takes carts or shoulders. Order the push plate in the same finish number as the pull so the two faces match.
14) Do I need a different Don-Jo 1152 for a left-hand versus right-hand door?
No handing to specify. The 1152 offset pull mounts vertically with the same bar either way, so one part number covers left-hand and right-hand doors, and the only thing you choose at order time is the finish. That is different from some decorative pulls, the Emtek Art Nouveau 8 inch pull, for instance, is ordered by handing.
15) If I am standardizing a facility on one pull, how do the Don-Jo 1152 and the ABH AB3300 differ?
The ABH AB3300 is a straight flat end pull handle with a 1 inch diameter, described as a commercial door pull. The Don-Jo 1152 is a 90 degree offset hung commercial pull with a 3/4 inch diameter bar, 2-1/2 inch projection, and 1-3/4 inch clearance, offered in 605, 613, 628, 629, and 630 finishes. For a facility standard, decide first whether your openings want offset or straight, then hold that one geometry across the building so replacements stay interchangeable and your finish stays consistent door to door.
How fast can I get the Don-Jo 1152-628 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 1152-628 come with a warranty?
Absolutely. The Don-Jo 1152-628 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 1152-628?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 1152-628 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!