Don-Jo 120 Cabinet Pull, 1-1/2...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1.66
$1.45
Don-Jo 120 Cabinet Pull, 1-1/2" Width, 1/2" Projection

Don-Jo 120 Cabinet Pull, 1-1/2" Width, 1/2" Projection

(No reviews yet) Write a Review

Model: 120-626
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1.66
$1.45
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 120 Cabinet Pull, 1-1/2" Width, 1/2" Projection

The Don-Jo 120 Cabinet Pull is a compact, residential-grade cabinet hardware solution designed to deliver reliable everyday performance with a clean, classic profile. Measuring 1-1/2" in width with a 1/2" projection, this pull offers a low-profile grip that suits a wide range of cabinet door and drawer applications. Available in five finish options — 605, 613, 619, 620, and 626 — the Don-Jo 120 provides versatile aesthetic compatibility for residential interiors.

Key Features

  • Compact Width: 1-1/2" width provides a sleek, space-conscious profile ideal for smaller cabinet doors and drawer fronts.
  • Low-Profile Projection: 1/2" projection keeps the pull close to the cabinet surface, minimizing snag risk and maintaining a streamlined appearance.
  • Multiple Finish Options: Available in finishes 605, 613, 619, 620, and 626 to coordinate with a variety of residential hardware and décor styles.
  • Residential-Grade Construction: Engineered for residential cabinet hardware applications, offering dependable day-to-day performance in home environments.
  • Convenient Shelf Pack: Sold individually (shelf pack of 1) for straightforward single-unit purchasing and replacement.

Technical Specifications

  • Product Group: Cabinet Hardware
  • Subcategory: Pulls and Push Plates
  • Product Subgroup: Cabinet Knobs and Pulls
  • Product Type: Cabinet Pulls
  • Commercial/Residential: Residential
  • Product Model: 120
  • Product Category: Cabinet Hardware
  • Department: Door Hardware

Typical Applications

  • Residential Kitchen Cabinets
  • Bathroom Vanity Cabinets
  • Bedroom Dresser and Wardrobe Drawers
  • Laundry Room Cabinetry
  • Home Office Storage Units
  • Built-In Shelving and Cabinet Doors
  • Light-Duty Residential Furniture Hardware Replacement

Why Don-Jo 120?

Don-Jo cabinet hardware is built to meet the practical demands of residential environments, combining straightforward functionality with a range of finish options that suit diverse interior styles. The 120 Cabinet Pull's compact 1-1/2" width and 1/2" projection make it a reliable, low-profile choice for homeowners and contractors seeking dependable, everyday cabinet hardware solutions.

Product Specs

Product Group:
Cabinet Hardware
Subcategory:
Pulls and Push Plates
Product Subgroup:
Cabinet Knobs and Pulls
Product Type:
Cabinet Pulls
Commercial/Residential:
Residential
Product Model:
120
Product Category:
Cabinet Hardware
Department:
Door Hardware

Don-Jo 120-626 – Frequently Asked Questions

1) Is the Don-Jo 120 cabinet pull big enough for a kitchen drawer front, or is it more of a small cabinet door pull?
The Don-Jo 120 is a small pull, 1-1/2 inches wide with a 1/2 inch projection. That size grips well on cabinet doors, vanity fronts, and narrow drawers, but on a wide kitchen drawer front it will look undersized and give you less to grab. For a big drawer or an appliance front, step up to a longer pull: the Trimco 553 Series drawer pull runs 3 inch center to center, the Trimco 562 Series comes in 3-1/2 inch, 4 inch, and 96mm center to center, and the Schaub 79-8 Steamworks is an 8 inch appliance pull.
2) Will a 1/2 inch projection pull leave enough room to get my fingers behind it?
Half an inch of projection is a light finger grip, not a full hand grip. The Don-Jo 120 sits close to the cabinet face, which keeps it from catching sleeves, apron strings, or a passing cart in a tight galley kitchen or laundry room. If you want a deeper grab, the Omnia 1970 projects 1-1/4 inches and the Omnia 1969 and 1971 both project 1-3/16 inches.
3) Can I use the Don-Jo 120 cabinet pull in an apartment building or commercial break room?
The 120 is built as residential-grade cabinet hardware, so it suits apartment kitchens, vanities, and unit casework where use is normal household traffic. A high-turnover commercial break room or a public restroom vanity is harder duty than it is rated for. If you need something heavier for those openings, the Deltana SBP35 modern square bar pull is a heavy-duty solid brass option, and the Omnia 1968/102 and 1969 through 1971 pulls are forged solid brass.
4) What finishes does the Don-Jo 120 cabinet pull come in, and which one matches my existing hardware?
Five finishes, and they are the standard BHMA numbers so you can match them to what is already on the run: 605 polished brass, 613 oil rubbed bronze, 619 satin nickel, 620 antique nickel, and 626 satin chrome. If your existing pulls are stamped with a number on the back, order the same one. 619 satin nickel and 626 satin chrome look similar in a photo but read warmer and cooler respectively in person, so mixing them across one kitchen will show.
5) Is the Don-Jo 120 a pull or a knob? I am trying to figure out which my cabinets take.
The 120 is a pull, meaning it mounts on two points and you grab across the bar rather than pinching a single button. Knobs mount on one screw through one hole. That matters if you are swapping existing hardware: a cabinet drilled for a single knob screw has to be redrilled for a two-point pull, and the old hole has to be filled. If you want to stay with a single hole, the Orca Hardware Bachelor Collection round cabinet knob and round ring knob are both 1-1/4 inch diameter knobs, and the Orca Blackcomb square knob is 25mm.
6) What is the closest equivalent to the Don-Jo 120 cabinet pull from another brand?
The Don-Jo 120 is a cabinet pull with a 1-1/2 inch width and 1/2 inch projection, sold in five finishes: 605 polished brass, 613 oil rubbed bronze, 619 satin nickel, 620 antique nickel, and 626 satin chrome. For a comparable small cabinet pull, the Trimco 553 Series drawer pull is offered at 3 inch center-to-center. The Trimco 562 Series covers 3-1/2 inch, 4 inch, and 96mm center-to-center. Because the 120 is described by overall width rather than center-to-center hole spacing, measure the existing hole spacing in the cabinet door or drawer front before ordering a Trimco pull as a drop-in replacement.
7) I need a longer pull than 1-1/2 inches for a large drawer front. What should I use instead?
The Don-Jo 120 measures 1-1/2 inches wide, which suits smaller cabinet doors and drawer fronts. For wider drawer fronts, the Deltana SBP35 modern square bar pull is 3-1/2 inches in solid brass, and the Trimco 562 Series drawer pull is offered in 3-1/2 inch, 4 inch, and 96mm center-to-center. For a full-height appliance or pantry door, the Schaub 79-8 Steamworks is an 8 inch appliance pull. Larger pulls generally use two mounting holes, so the drawer front will need to be drilled to the spacing of whichever pull you select.
8) The Don-Jo 120 is residential grade. What holds up better in a commercial or high-traffic install?
The Don-Jo 120 cabinet pull is designated residential. For heavier-use cabinetry, the Deltana SBP35 modern square bar pull is a heavy-duty solid brass pull at 3-1/2 inches. Omnia's cabinet pulls are forged solid brass, including the 1968/102 at 4 inch center-to-center, the 1969 and 1971 at 1-3/16 inch projection, and the 1970 at 1-1/4 inch projection. All four Omnia series project further from the cabinet face than the 120's 1/2 inch, so allow for the extra clearance in a corridor or galley layout.
9) I need to replace pulls on 40 cabinet doors in a rental unit. How is the Don-Jo 120 sold?
One pull per unit, shelf pack of 1. So a 40 door job is a quantity of 40, plus whatever you want on hand as spares. Buying by the piece is useful on a turnover where you are only swapping the doors that got damaged rather than refinishing the whole kitchen, and it lets you keep a couple of matched spares in the maintenance shop in the same finish.
10) Where does a 1-1/2 inch cabinet pull actually make sense on a job?
Small openings and tight face frames. The Don-Jo 120 at 1-1/2 inches wide fits narrow cabinet doors, bathroom vanity fronts, laundry room cabinetry, bedroom dresser and wardrobe drawers, home office storage, and built-in shelving doors. On a wide drawer bank it will look lost next to the drawer front. Pull width should read proportional to the face it sits on, so measure your narrowest door before you standardize a whole unit on one size.
11) What is the difference between the Don-Jo 120 and an edge pull?
Two different jobs. The 120 mounts on the face of the door or drawer and projects 1/2 inch out from it. An edge pull recesses into or mounts along the edge of the panel so nothing sticks out at all, which is what you use on a sliding panel, a door with no clearance in front of it, or a flush contemporary look. If that is what you need, the Schaub Sabre edge pulls come in 3 inch, 4 inch, and 5 inch center to center. Also worth ruling out: a T-pull bar like the Orca CK-12001 is a 2 inch steel bar in satin nickel, a different profile than the 120 even though both are face-mounted.
12) Can I use a cabinet knob instead of the Don-Jo 120 pull?
A knob is a single-hole part and the Don-Jo 120 is a pull, so the two are not interchangeable without matching the boring in the door or drawer front. If a knob suits the opening, the Orca Hardware CK-15030 Bachelor Collection round cabinet knob and the CK-16030 Bachelor Collection round ring cabinet knob are both 1-1/4 inch diameter, and the CK-17025 Blackcomb Collection square cabinet knob is 25mm diameter. The Don-Jo 120's 1/2 inch projection keeps it close to the cabinet face, which is the behavior a knob will not reproduce.
13) Is a Schaub Sabre edge pull a substitute for the Don-Jo 120?
No. The Schaub 10010, 10011, and 10012 Sabre pulls are edge pulls, at 3 inch, 4 inch, and 5 inch center-to-center respectively, and mount on the edge of a door or drawer rather than the face. The Don-Jo 120 is a face-mounted cabinet pull with a 1-1/2 inch width and 1/2 inch projection off the cabinet surface. If the existing hardware sits on the front of the cabinet door, the edge pulls will not replace it.
14) I want a decorative cabinet pull rather than the plain Don-Jo 120 profile. What are the options?
The Don-Jo 120 has a compact, classic profile at 1-1/2 inches wide with a 1/2 inch projection, in five finishes from 605 polished brass through 626 satin chrome. For styled alternatives, Emtek's Schaub Collection includes the Art Deco cabinet pull, the Alexander cabinet pull, the Bar cabinet pull, and the 8405 from the Emtek SELECT series, all carrying a cabinet knob/pull function. Deltana's SBP35 is a modern square bar pull at 3-1/2 inches. Confirm the hole spacing of the decorative pull against what is already drilled before switching styles across a run of cabinets.
15) I am matching satin nickel hardware across a unit. Does anything else come in satin nickel besides the Don-Jo 120?
The Don-Jo 120 cabinet pull is offered in 619 satin nickel, alongside 605 polished brass, 613 oil rubbed bronze, 620 antique nickel, and 626 satin chrome. If a longer pull is needed on the same run of cabinets, the Orca Hardware CK-12001 T-pull bar is a steel pull in satin nickel with a 2 inch bar width. Note that satin nickel and antique nickel are distinct finishes, so specify 619 if the goal is to match a satin nickel fleet.
16) I want a decorative pull for a high-end residential remodel. Is the Don-Jo 120 the right pick?
The 120 is a plain, functional pull in a classic profile, sold in five standard finishes. It does the job on a rental turnover or a builder-grade kitchen without drawing attention. For a design-driven remodel where the hardware is meant to be seen, look at the Emtek Schaub Collection pulls instead, which come in named decorative styles including Alexander, Art Deco, Bar, and the Emtek SELECT 8405.
How fast can I get the Don-Jo 120-626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 120-626 come with a warranty?
Absolutely. The Don-Jo 120-626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 120-626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 120-626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!