Don-Jo 57 Cabinet Pull, 1-1/2"...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2.69
Don-Jo 57 Cabinet Pull, 1-1/2" Width, 1/8" Projection

Don-Jo 57 Cabinet Pull, 1-1/2" Width, 1/8" Projection

(No reviews yet) Write a Review

Model: 57-626
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2.69
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 57 Cabinet Pull — 1-1/2" Width, 1/8" Projection

The Don-Jo 57 Cabinet Pull is a compact, residential-grade cabinet hardware solution designed to deliver reliable, everyday functionality with a clean, low-profile aesthetic. Measuring 1-1/2" in width with a slim 1/8" projection, this cabinet pull is ideally suited for cabinetry applications where a minimal footprint and refined appearance are priorities. Available in five finish options — 605, 613, 619, 620, and 626 — the Don-Jo 57 offers versatile compatibility with a wide range of interior design styles and cabinetry finishes.

Key Features

  • Compact 1-1/2" Width: Precisely sized at 1-1/2" wide, making it an ideal fit for standard residential cabinet doors and drawer fronts where a discreet pull is preferred.
  • Low-Profile 1/8" Projection: The minimal 1/8" projection keeps the pull close to the cabinet surface, reducing snagging hazards and maintaining a sleek, flush appearance.
  • Multiple Finish Options: Available in finishes 605, 613, 619, 620, and 626, providing flexibility to coordinate with existing cabinet hardware and interior decor.
  • Residential-Grade Quality: Engineered for residential applications, delivering dependable performance in home cabinetry environments including kitchens, bathrooms, and living spaces.
  • Convenient Shelf Pack: Sold individually (shelf pack of 1), allowing for precise quantity purchasing without unnecessary overstock.
  • Versatile Cabinet Hardware: Classified under Cabinet Knobs and Pulls within the Pulls and Push Plates subcategory, confirming broad compatibility with standard residential cabinet configurations.

Technical Specifications

  • Product Group: Cabinet Hardware
  • Subcategory: Pulls and Push Plates
  • Product Subgroup: Cabinet Knobs and Pulls
  • Product Type: Cabinet Pulls
  • Commercial/Residential: Residential
  • Product Model: 57
  • Product Category: Cabinet Hardware
  • Department: Door Hardware

Typical Applications

  • Residential Kitchen Cabinetry
  • Bathroom Vanity Cabinets
  • Bedroom Dresser and Wardrobe Drawers
  • Home Office Storage Cabinets
  • Laundry Room Cabinetry
  • Built-In Shelving and Storage Units
  • Multi-Unit Residential Property Renovations

Why Don-Jo 57?

Don-Jo cabinet hardware is engineered to meet the practical demands of residential cabinetry with consistent quality and a broad selection of finish options. The Don-Jo 57 Cabinet Pull's low-profile 1/8" projection and 1-1/2" width reflect thoughtful design for spaces where clean lines and reliable hardware performance matter most. With five available finishes, this pull integrates seamlessly into a wide variety of residential interior settings.

Product Specs

Product Group:
Cabinet Hardware
Subcategory:
Pulls and Push Plates
Product Subgroup:
Cabinet Knobs and Pulls
Product Type:
Cabinet Pulls
Commercial/Residential:
Residential
Product Model:
57
Product Category:
Cabinet Hardware
Department:
Door Hardware

Don-Jo 57-626 – Frequently Asked Questions

1) Will the Don-Jo 57 cabinet pull work on my kitchen cabinet doors and drawer fronts?
The Don-Jo 57 is a cabinet pull sized 1-1/2 inches wide with a 1/8 inch projection, so it suits standard residential cabinet doors and drawer fronts where you want the hardware to sit tight to the face. That 1/8 inch projection is shallow, so it works as a finger-grip pull rather than a full-hand grab bar. In a tight galley or a laundry closet where a deeper pull catches on clothing or a passing hip, the low profile is the reason to pick it.
2) Is the Don-Jo 57 pull deep enough to get your fingers behind, or is it too shallow?
Projection is 1/8 inch, which is minimal. That gives you a fingertip pull, not a hand-wrap grip. On a light cabinet door or a small vanity drawer that's fine, and it's the point of the part: nothing sticking out to snag. If you need a pull someone can wrap a full hand around, on a heavy pantry drawer or an appliance panel, go deeper. The Omnia 1970 is a forged solid brass cabinet pull with a 1-1/4 inch projection, and the Omnia 1969 and 1971 both run 1-3/16 inch projection.
3) I'm re-doing cabinet hardware across a whole apartment building. Can I standardize on the Don-Jo 57?
For residential units, yes. The Don-Jo 57 is a residential-grade cabinet pull, and it comes in one size, 1-1/2 inches wide, across six finishes. That makes it straightforward to standardize a fleet of units: one part, one finish code, ordered by the piece rather than in fixed multi-packs, so you buy exactly the count each unit needs. It's not specified as commercial-grade hardware, so for high-traffic institutional casework, look at a heavier pull instead.
4) What else could I buy instead of the Don-Jo 57 if I want a longer pull?
The 57 is a compact 1-1/2 inch pull. For a longer run across a wide drawer, the Trimco 553 Series drawer pull is a 3 inch center-to-center pull and the Trimco 562 Series comes in 3-1/2 inch, 4 inch, and 96mm center-to-center. Deltana's SBP35 is a 3-1/2 inch modern square bar pull in solid brass, and the Omnia 1968/102 is forged solid brass at 4 inch center-to-center. For an appliance panel, the Schaub 79-8 Steamworks is an 8 inch appliance pull. Remember that a center-to-center dimension is the hole spacing you have to drill, while the 57's 1-1/2 inches is its overall width.
5) Will the Don-Jo 57 cover the holes left by the pulls I'm taking off?
Only if your existing hole spacing falls within its 1-1/2 inch overall width, which is a compact footprint. Pulls previously spec'd at 3 inch or 96mm center-to-center, the two most common older cabinet spacings, will leave holes outside it. In that case match the old spacing instead: the Trimco 553 Series is 3 inch center-to-center and the Trimco 562 Series covers 3-1/2 inch, 4 inch, and 96mm. Measure hole center to hole center on a door you've already got off before you order.
6) What is the closest alternative to the Don-Jo 57 cabinet pull if I want solid brass instead?
The Don-Jo 57 is a residential-grade cabinet pull with a 1-1/2 inch width and a 1/8 inch projection. If forged solid brass construction is the priority, the Omnia 1970 Modern Cabinet Pull is a forged solid brass cabinet pull with a 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 are forged solid brass pulls with a 1-3/16 inch projection. All three stand further off the cabinet face than the 57 does, which changes the finger clearance and the look, so match the projection to what the cabinetry calls for.
7) The Don-Jo 57 is residential grade. What is a heavier-duty pull for high-traffic cabinetry?
The Don-Jo 57 is built for residential applications. Where the cabinetry sees commercial traffic -- a nurses' station, a school casework run, a hotel back-of-house -- the Deltana SBP35 Modern Square Bar Pull is a heavy-duty solid brass bar pull at 3-1/2 inches, and the Orca Hardware CK-12001 T-Pull Bar is a steel pull with a 2 inch bar width in satin nickel. Both are larger in the hand than the 57's 1-1/2 inch width.
8) I have 4 inch center-to-center holes already drilled. Does the Don-Jo 57 fit, or what does?
The Don-Jo 57 is a 1-1/2 inch wide pull, so it will not span holes drilled at 4 inch centers. For that existing pattern, the Omnia 1968/102 Modern Cabinet Pull is a forged solid brass pull with 4 inch center-to-center spacing, and the Trimco 562 Series drawer pulls include a 4 inch center-to-center option. Use the 57 on new drilling or where the existing spacing is compact.
9) What finishes does the Don-Jo 57 cabinet pull come in?
Six finishes on the Don-Jo 57: 605 polished brass, 609 antique brass, 613 oil rubbed bronze, 619 satin nickel, 620 antique nickel, and 626 satin chrome. Those are the standard BHMA finish numbers, so if the rest of the hardware in the unit is specified by number you can match on the code rather than by eye. 626 and 619 are the two that most commonly line up with existing builder-grade cabinet hardware.
10) Is the Don-Jo 57 sold as a single pull or in a multi-pack?
Single. The 57 ships as a shelf pack of one, so a kitchen with 22 doors and drawers is a quantity of 22. Useful on a punch list or a partial replacement where you only need to match three or four openings and don't want a 10-pack sitting on the shelf.
11) Should I use a small pull like the Don-Jo 57 or a knob on my cabinets?
Doors take either; drawers are where it matters. A 1-1/2 inch wide pull like the Don-Jo 57 gives you a horizontal grip across the drawer face, which pulls squarer than a single center knob on a wide drawer. If you want a knob instead, Orca Hardware's Bachelor Collection has a round cabinet knob at 1-1/4 inch diameter, a round ring version at the same diameter, and the Blackcomb Collection square knob at 25mm. Knobs need one hole; a two-hole pull needs the center-to-center spacing drilled to match.
12) I need a pull for a sliding or bypass cabinet panel where nothing can stick out. Is the Don-Jo 57 the right part?
With 1/8 inch of projection the 57 sits nearly flush, which is why it suits panels that pass close to something. But if the panel has to clear an adjacent face entirely, an edge pull is the purpose-built answer: Schaub's Sabre edge pulls come at 3 inch (10010), 4 inch (10011), and 5 inch (10012) center-to-center. Those mount on the panel edge rather than the face.
13) Is the Don-Jo 57 rated for commercial casework or office millwork?
It's specified as residential. The 57 is built for home cabinetry: kitchens, vanities, bedroom drawers, laundry and home office storage. For commercial millwork taking constant public use, step up to a solid brass pull such as the Deltana SBP35 square bar pull, described as heavy-duty solid brass, or the forged solid brass Omnia 1968, 1969, 1970, and 1971 pulls.
14) Can I use an edge pull instead of the Don-Jo 57 on a cabinet door?
An edge pull is a different application. The Don-Jo 57 is a face-mounted cabinet pull with a 1/8 inch projection off the cabinet surface. The Schaub Sabre edge pulls -- the 10010 at 3 inch center-to-center, the 10011 at 4 inch, and the 10012 at 5 inch -- are edge pulls, mounted at the edge of the door or panel rather than on the face. Choose the edge pull when the design calls for nothing standing off the cabinet front at all, and the 57 when you want a low-profile pull on the face.
15) What do I use on a refrigerator or range panel instead of the Don-Jo 57?
The Don-Jo 57 is sized for residential cabinetry at 1-1/2 inches wide. An appliance panel needs a pull built for that load and length: the Schaub 79-8 Steamworks 8 inch cabinet pull is an appliance pull. Use the appliance pull on the refrigerator, freezer, or range panel and keep the 57 on the surrounding cabinet doors and drawers if you want a matched but smaller pull elsewhere in the run.
16) I am specifying cabinet hardware for a multi-unit renovation and want a full collection rather than a single model. What are my options next to the Don-Jo 57?
The Don-Jo 57 is a single model offered in six finishes: 605 polished brass, 609 antique brass, 613 oil rubbed bronze, 619 satin nickel, 620 antique nickel, and 626 satin chrome, which lets you standardize one pull across a whole property. If you want a design collection with multiple profiles instead, the Emtek SELECT 8405 Schaub Collection, and the Emtek Alexander, Art Deco, and Bar cabinet pulls from the Schaub Collection are each cabinet knob/pull series you can draw a coordinated set from. The Don-Jo route standardizes on one part number; the Emtek route lets you vary the profile within one design family.
17) Does the SDC SP50 spindle work with the Don-Jo 57 cabinet pull?
No -- the two are unrelated parts. The Don-Jo 57 is a cabinet pull for cabinet doors and drawer fronts. The SDC SP50 is a 50mm spindle, a door controls part that drives a lockset, not cabinet hardware. If you are looking to match the 57 across a cabinetry run, stay with cabinet pulls such as the Trimco 553 Series drawer pulls at 3 inch center-to-center.
How fast can I get the Don-Jo 57-626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 57-626 come with a warranty?
Absolutely. The Don-Jo 57-626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 57-626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 57-626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!