Don-Jo 69 Push Plate 3" x 12" ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$22.52
Don-Jo 69 Push Plate 3" x 12" for Commercial Doors

Don-Jo 69 Push Plate 3" x 12" for Commercial Doors

(1 review) Write a Review

Model: 69-630
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$22.52
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 69 Push Plate 3" x 12" for Commercial Doors

The Don-Jo 69 Push Plate is a commercial-grade door trim accessory measuring 3" wide by 12" long, engineered to protect door surfaces and provide a clean, professional appearance in high-traffic environments. Conforming to ANSI J301 standards, this push plate is available in a wide range of finishes — including 605, 606, 609, 612, 613, 619, 628, 629, and 630 — making it easy to coordinate with existing door hardware across virtually any commercial application. Designed for straightforward surface mounting, the Don-Jo 69 delivers reliable performance and lasting aesthetics for doors in offices, schools, healthcare facilities, and more.

Key Features

  • Precise Dimensions: Measures 3" wide by 12" long, providing ample coverage for standard commercial door push areas while maintaining a sleek profile.
  • ANSI J301 Compliant: Meets ANSI J301 standards, ensuring compatibility and quality assurance for commercial door hardware installations.
  • Wide Finish Selection: Available in nine finishes — 605, 606, 609, 612, 613, 619, 628, 629, and 630 — to match or complement existing door hardware and architectural aesthetics.
  • Commercial-Grade Construction: Built to withstand the demands of high-traffic commercial environments, offering durable surface protection for door faces.
  • Convenient Shelf Pack Quantity: Sold in shelf packs of 10, making it easy to stock and deploy across multiple doors in a single project.
  • Versatile Application: Suitable for a broad range of commercial door types and settings, from office buildings to institutional facilities.

Certifications & Compliance

  • ANSI J301 Compliant
  • Commercial Grade

Technical Specifications

  • Product Group: Door Trim and Accessories
  • Subcategory: Pulls and Push Plates
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Type: Push and Pull Plates
  • Commercial/Residential: Commercial
  • Product Model: 69
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities and Schools
  • Healthcare Institutions and Hospitals
  • Retail Establishments and Storefronts
  • Industrial and Warehouse Facilities
  • Government and Municipal Buildings
  • Multi-Tenant Residential and Hospitality Properties

Why Don-Jo 69?

Don-Jo push plates are engineered to meet the rigorous demands of commercial door hardware applications, with the model 69 conforming to ANSI J301 standards and offered in nine distinct finishes to suit any architectural environment. With dimensions of 3" x 12" and a shelf pack of 10, the Don-Jo 69 is a practical, professional-grade solution for protecting and enhancing commercial doors in high-traffic settings where durability and appearance both matter.

Product Specs

Product Group:
Door Trim and Accessories
Subcategory:
Pulls and Push Plates
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Push and Pull Plates
Commercial/Residential:
Commercial
Product Model:
69
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Don-Jo 69-630 – Frequently Asked Questions

1) Will a Don-Jo 69 push plate cover the push area on a standard commercial door?
The Don-Jo 69 measures 3 x 12 inches, which is the small end of the push plate range. It covers the hand contact area on a standard door but leaves most of the stile exposed. If you want more face coverage on a heavily used door, a taller plate like the Delaney 3-1/2 x 15 inch or 4 x 16 inch push plate covers considerably more surface. For a narrow stile aluminum storefront door, the 3 inch width is the reason to pick the 69 over those wider plates.
2) What finishes does the Don-Jo 69 push plate come in, and which one matches my existing lever hardware?
Five finishes are orderable: 605 polished brass, 606 satin brass, 613 oil rubbed bronze, 628 satin aluminum, and 630 satin stainless steel. Those are BHMA finish numbers, so match the number on your existing hardware rather than the name. 630 is the usual pick in schools, hospitals, and anywhere else the locksets are satin stainless; 628 is what pairs with clear anodized aluminum storefront doors and aluminum door pulls.
3) Does the Don-Jo 69 meet the ANSI spec our architect called out for push plates?
The 69 conforms to ANSI J301, the push plate designation in the ANSI/BHMA A156.6 architectural door trim standard. If the door schedule calls for a J301 push plate at 3 x 12, this is the part. Nine finish codes are published against the model, 605, 606, 609, 612, 613, 619, 628, 629, and 630, so a specified finish outside the five commonly stocked is still within the model's published range.
4) Will a 3 inch wide push plate fit a narrow stile aluminum door?
At 3 inches wide the 69 is one of the narrower commercial push plates, which is what makes it workable on narrow stile aluminum and glass front doors where a 3-1/2 or 4 inch plate runs into the glass stop. Measure your stile face before ordering; you need the flat stile width to exceed 3 inches with room for the fastener line. If your stile is wide enough for more coverage, a 3-1/2 x 15 or 4 x 16 inch plate is the alternative.
5) I am replacing a worn push plate. Will the Don-Jo 69 cover the old screw holes?
Only if the plate you are pulling off is also 3 x 12. The 69 is that size exactly, so a like for like swap of another 3 x 12 J301 plate lines up on face coverage, though fastener spacing is not guaranteed to match another maker's pattern. Coming off anything larger, a 3-1/2 x 15 for instance, the 69 will not hide the old holes or the wear shadow on the door face; go to a plate at least as large as what you removed.
6) What should I use on a door that gets pulled hard all day instead of a push plate?
A push plate like the Don-Jo 69 protects the face and gives nothing to grip, so it is the wrong part for a pull-side opening under load. Ives lists two heavy duty pull plates for that duty: the 8302 with through bolt mounting, and the 8303 with 8 inch or 10 inch center to center mounting. Trimco lists heavy duty cast pull plates as well, the 1012 tapered at 5.5 inch center to center and the 1013 round at 5.5 inch center to center. Through bolt mounting on the Ives 8302 carries pull force to the far face of the door rather than into screws in the door skin.
7) What is the difference between a push plate and a pull plate when both go on the same door?
The Don-Jo 69 is a push plate, 3 inches by 12 inches, meant for the push side of the opening where hands hit the door face and nothing is gripped. A pull plate carries a handle mounted to the plate, which is what you want on the pull side. Delaney offers both halves in matched sizes: the Delaney 3-1/2 inch by 15 inch push plate and the Delaney 3-1/2 inch by 15 inch pull plate, and again at 4 inch by 16 inch. Trimco covers only the pull side in the sets named here, with the 1010 Series cast pull plate at 5 inch center to center and the 1014 Series half-round pull plate at 6 inch center to center. If you are trimming a single-acting door front and back, the 69 handles the push face and one of the pull plates handles the other.
8) The 3 inch by 12 inch push plate is too small for the door I am covering. What is a larger push plate?
The Don-Jo 69 covers a 3 inch by 12 inch area of the door face. For more coverage on the push side, Delaney lists a 3-1/2 inch by 15 inch push plate and a 4 inch by 16 inch push plate. The 4 inch by 16 inch is the widest and tallest push plate in the group, which suits a wider hand strike zone or a door already scarred outside a 12 inch band. Match the plate size to the wear pattern on the door, not to the door width.
9) How does the Don-Jo 69 push plate mount, and do I need to drill the door?
Surface mounted to the door face, so no mortising and no cutout. It fastens through the plate face into the door, which means on a hollow metal or aluminum door you are drilling and tapping or using through fasteners suited to that door. On a wood door it is a straight screw application. Nothing about the opening changes, so it goes on an existing door without touching the lock, hinges, or closer.
10) We need push plates for a whole building. Is the Don-Jo 69 sold individually or in a case?
The 69 ships in shelf packs of 10, which is how it is stocked and deployed across a run of doors. For a facility standardizing on one plate, order in multiples of 10 per finish and keep spares from the same pack so replacements match on tone; brass and bronze finishes in particular vary batch to batch.
11) Is a plain Don-Jo 69 push plate right for a lobby or should I use a decorative one?
The 69 is a flat commercial plate, no pattern or relief, meant for offices, schools, healthcare, retail, and government buildings where it disappears into the opening. In a residential or boutique setting where the door hardware is a design element, a cast decorative plate reads better: the Emtek Knoxville, Emtek Modern, or the Emtek Lost Wax Cast Bronze Petal push and pull plates. On a high traffic corridor the plain plate is the one that still looks right in five years.
12) I need push plates that match a decorative interior, not a plain commercial look. What are the options?
The Don-Jo 69 is a plain rectangular commercial push plate offered in finishes including 605 polished brass, 606 satin brass, 613 oil rubbed bronze, 628 satin aluminum, and 630 satin stainless steel, which is what most office, school, and healthcare openings take. For a decorative interior, Emtek lists push and pull plate sets in three designs: Knoxville, Modern, and the Lost Wax Cast Bronze Petal. The Emtek sets are styled families meant to read as part of a decorative hardware scheme; the Don-Jo 69 is sized and finished to coordinate with existing commercial door hardware.
13) Which pull plates give a specific center to center dimension if I have to match an existing hole pattern?
Center to center on the pull is the number that decides whether you reuse the holes already in the door. Trimco publishes it across its heavy duty cast line: the 1010 Series at 5 inch, the 1012 tapered at 5.5 inch, the 1013 round at 5.5 inch, and the 1014 Series half-round at 6 inch. Ives publishes 8 inch or 10 inch center to center on the 8303. The Don-Jo 69 is a push plate with no pull, so there is no center to center dimension to match on it.
14) I am standardizing push plates across a building. Is one size family better to settle on than another?
Standardizing means one plate size and one finish repeated on every door, so the choice is driven by the largest opening you have to cover and by the finish already on your levers and closers. The Don-Jo 69 gives a 3 inch by 12 inch commercial push plate in nine finishes including 605, 606, 613, 628, and 630, and it is sold in shelf packs of 10, which maps cleanly onto a floor at a time. Delaney's push plates step up in two sizes, 3-1/2 inch by 15 inch and 4 inch by 16 inch, if your doors need more face coverage. Pick the size once, then order the same finish code across the whole fleet so replacements years out still match.
15) Can I put a Don-Jo 69 push plate on a door that has an exit device?
On the pull side of a door with an exit device the plate is not what you want, since the push bar already handles egress. Where a push plate goes on that opening is the opposite face on the push side of a pair. If you are looking for trim that mounts with a Detex Value Series exit device specifically, that is the Detex P/PN Series pull plate, which is built for those devices. The Don-Jo 69 is standalone surface trim with no device tie-in.
How fast can I get the Don-Jo 69-630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 69-630 come with a warranty?
Absolutely. The Don-Jo 69-630 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 69-630?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 69-630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Product Reviews

  • 5
    Push plate

    Posted by Shane McCoy on Mar 8th 2026

    Great product shipped fast. I call the f up plates hide your mistakes with elegance

!