Don-Jo 72 Push Plate, 6" by 16...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$87.50
$77.65
Don-Jo 72 Push Plate, 6" by 16" for Commercial Doors

Don-Jo 72 Push Plate, 6" by 16" for Commercial Doors

(No reviews yet) Write a Review

Model: 72-626
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$87.50
$77.65
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 72 Push Plate, 6" by 16" for Commercial Doors

The Don-Jo 72 Push Plate is a commercial-grade door trim accessory measuring 6" wide by 16" long, designed to protect door surfaces and provide a clean, professional appearance in high-traffic environments. Conforming to ANSI J301 standards, this push plate is available in a wide selection of finishes — including 605, 606, 609, 612, 613, 619, 628, 629, and 630 — making it easy to coordinate with existing door hardware. Ideal for commercial applications where durability and aesthetics are equally important, the Don-Jo 72 delivers reliable performance across a broad range of door types.

Key Features

  • Generous Dimensions: Measures 6" wide by 16" long, providing ample surface coverage to protect door faces in busy commercial settings.
  • Wide Finish Selection: Available in nine finishes — 605, 606, 609, 612, 613, 619, 628, 629, and 630 — for seamless coordination with existing door hardware and architectural design.
  • ANSI J301 Compliant: Meets ANSI J301 standards, ensuring compatibility and quality assurance for commercial door hardware installations.
  • Commercial-Grade Construction: Engineered for commercial use, delivering the durability required for high-traffic doors in demanding environments.
  • Convenient Shelf Pack: Sold in shelf packs of 10, making it efficient for contractors and facility managers to stock and install across multiple doors.
  • Versatile Application: Classified under Door Trim and Accessories for use across a wide variety of commercial door configurations and settings.

Certifications & Compliance

  • ANSI J301 Compliant
  • Commercial Grade

Technical Specifications

  • Product Group: Door Trim and Accessories
  • Subcategory: Pulls and Push Plates
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Type: Push and Pull Plates
  • Commercial/Residential: Commercial
  • Product Model: 72
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo 72?

Don-Jo 72 Push Plates are built to commercial-grade standards and conform to ANSI J301, ensuring reliable performance and broad compatibility in professional door hardware installations. With nine available finishes and a practical 6" x 16" profile, the Don-Jo 72 offers the flexibility and durability that contractors and facility managers depend on for high-traffic commercial environments.

Product Specs

Product Group:
Door Trim and Accessories
Subcategory:
Pulls and Push Plates
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Push and Pull Plates
Commercial/Residential:
Commercial
Product Model:
72
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Don-Jo 72-626 – Frequently Asked Questions

1) What size is the Don-Jo 72 push plate, and will it cover the scuffed area on a commercial door?
The Don-Jo 72 measures 6 inches by 16 inches, which is the common commercial push plate footprint for covering the hand-contact area on a door face. It is a flat plate with no pull attached, so it goes on the push side of the opening. If you need something to grab on the pull side, pair it with a pull plate rather than a second push plate.
2) Is the Don-Jo 72 push plate ANSI J301?
Yes, the 72 conforms to ANSI J301, which is the ANSI/BHMA designation for a push plate. If your spec or hardware schedule calls out J301, this plate meets that line item, and the 6 x 16 inch size is what schedules usually pair with it.
3) Should I order a push plate or a pull plate for my door?
It depends which side you are hardening. The Don-Jo 72 is a flat push plate for the swing (push) side, where hands hit the door and leave marks. On the pull side you want a plate with a handle on it, like the Ives 8302 heavy duty pull plate with through bolt mounting or the Trimco 1010 Series cast pull plate with 5 inch center-to-center. A common commercial pairing is a push plate one side, pull plate the other, in the same finish.
4) The Don-Jo 72 is a push plate - what goes on the pull side of the same door?
A push plate is a flat protection plate with no handle, so it only serves the push side of a swinging door. For the pull side, the Delaney 4 inch by 16 inch door pull plate and the Delaney 3-1/2 inch by 15 inch door pull plate carry a pull mounted to the plate. Trimco offers cast pull plates in several pull profiles: the 1010 Series cast pull plate with 5 inch center-to-center, the 1012 cast tapered pull plate with 5.5 inch center-to-center, the 1013 round pull plate with 5.5 inch center-to-center, and the 1014 Series half-round pull plate with 6 inch center-to-center. Order both sides together so the finish matches across the door.
5) How many Don-Jo 72 push plates come in a pack?
The 72 is sold in shelf packs of 10, which is convenient if you are doing a corridor or a floor of classrooms in one pass and want every opening in the same finish. Order one finish per pack.
6) Will a Don-Jo 72 push plate hold up in a school or hospital corridor?
That is what it is built for. The 72 is a commercial-grade plate, and stainless finishes 629 and 630 are the usual pick for healthcare and education because they clean up and do not show wear the way brass plating does. Brass and bronze finishes like 605 and 613 are the choice where appearance is driving the decision more than traffic.
7) Do I need to match a center-to-center dimension when ordering a Don-Jo 72?
No. The 72 is a flat push plate, so there is no handle and no center-to-center to specify. Center-to-center only matters when you are ordering a pull, like the Ives 8303 with 8 or 10 inch center-to-center or the Trimco 1014 Series half-round pull plate with a 6 inch center-to-center pull. For the 72 you specify size and finish, nothing else.
8) What should I use instead of a Don-Jo 72 push plate on a decorative or historic opening?
The Don-Jo 72 is a plain rectangular 6 inch by 16 inch plate intended for commercial door faces. Where the opening calls for decorative trim, Emtek offers push and pull plates in the Knoxville and Modern series, and the Petal series in lost wax cast bronze. These are styled sets rather than flat utility plates, so they suit a lobby, boutique or residential entry where the plate is meant to be seen rather than to take cart traffic.
9) Can a Don-Jo 72 push plate replace the pull plate on a door with an exit device?
No. The Don-Jo 72 is a flat push plate with no pull attached, so it cannot serve as the outside pull trim on an exit device opening. For that application, the Detex P/PN Series pull plate is made as trim for Detex Value Series exit devices and coordinates with the device on the door. The Don-Jo 72 still works on the push side of a separate door leaf where only surface protection is needed.
10) I need one plate size across a whole building - does the Don-Jo 72 or a Delaney plate standardize better?
The Don-Jo 72 gives one 6 inch by 16 inch footprint in nine finishes, including 605 polished brass, 613 oil rubbed bronze, 626 satin chrome and 630 satin stainless steel, so a facility can hold a single size and pick the finish per wing. Delaney splits its push plates across two sizes, 4 inch by 16 inch and 3-1/2 inch by 15 inch, with pull plates in the matching 4 inch by 16 inch and 3-1/2 inch by 15 inch footprints. If your doors vary in stile width, the Delaney pairing lets push and pull match size for size; if the doors are consistent, one Don-Jo 72 size covers the fleet.
11) Which pull plate matches the grip a user already has if we are replacing an old pull with a Don-Jo 72 on the push side?
The Don-Jo 72 covers the push face only, so the grip choice is made on the pull side. Center-to-center on the pull sets how the hand lands: the Trimco 1010 Series cast pull plate is 5 inch center-to-center, the 1012 cast tapered and 1013 round pull plates are both 5.5 inch center-to-center, and the 1014 Series half-round is 6 inch center-to-center. Ives lists the 8303 with 8 inch or 10 inch center-to-center mounting for a longer reach. Measure the existing pull center-to-center before ordering so the new plate covers the old fastener holes.
How fast can I get the Don-Jo 72-626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 72-626 come with a warranty?
Absolutely. The Don-Jo 72-626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 72-626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 72-626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!