Don-Jo EL-115-RC Extended Lip ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$13.46
$11.81
Don-Jo EL-115-RC Extended Lip Strike with Radius Corner, 2-1/4" x 1-1/2", 18 Gauge

Don-Jo EL-115-RC Extended Lip Strike with Radius Corner, 2-1/4" x 1-1/2", 18 Gauge

(No reviews yet) Write a Review

Model: EL-115-619-RC
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$13.46
$11.81
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo EL-115-RC Extended Lip Strike with Radius Corner, 2-1/4" x 1-1/2", 18 Gauge

The Don-Jo EL-115-RC is a commercial-grade Extended Lip Strike featuring a radius corner design, measuring 2-1/4" in height and 1-1/2" in width, constructed from heavy-duty 18-gauge steel (.050). Engineered for reliable latch engagement in commercial door applications, this single-latch-hole strike is available in a wide range of finishes including DU, 605, 609, 619, 622, 629, and 630 to match virtually any door hardware configuration. The width measurement is taken from the center of the screw hole to the end of the lip, ensuring precise fit and alignment during installation.

Key Features

  • Precise Dimensions: Measures 2-1/4" in height and 1-1/2" in width (measured from center of screw hole to end of lip) for accurate, code-compliant installation.
  • Heavy-Duty 18-Gauge Construction: Fabricated from 18 ga. (.050) steel, delivering robust durability and long-term performance in demanding commercial environments.
  • Extended Lip Design: The extended lip provides enhanced latch engagement and added security over standard lip strikes, ideal for commercial door applications.
  • Radius Corner Profile: Smooth radius corner design reduces snagging and provides a clean, professional appearance on finished door frames.
  • Single Latch Hole Configuration: Features one latch hole for straightforward compatibility with standard commercial latch sets.
  • Broad Finish Selection: Available in seven finishes — DU, 605, 609, 619, 622, 629, and 630 — to coordinate with existing door hardware and architectural requirements.
  • Commercial-Grade Application: Designed and rated for commercial use, suitable for high-traffic door openings requiring dependable strike performance.

Technical Specifications

  • Subcategory: Door Strikes
  • Product Group: Parts and Accessories
  • Product Subgroup: Door Strikes and Strike Boxes
  • Product Type: Door Strikes
  • Commercial/Residential: Commercial
  • Product Category: Parts and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo EL-115-RC?

Don-Jo Extended Lip Strike products are built to commercial-grade standards using heavy-duty 18-gauge (.050) steel construction, ensuring reliable latch engagement and long-lasting durability in high-traffic door openings. The EL-115-RC radius corner design and broad finish availability make it a versatile, professional solution for contractors and facility managers seeking dependable door hardware components.

Manufacturer Resources

DON-JO Strike Plates

Product Specs

Subcategory:
Door Strikes
Product Group:
Parts and Accessories
Product Subgroup:
Door Strikes and Strike Boxes
Product Type:
Door Strikes
Commercial/Residential:
Commercial
Product Model:
EL 115 RC
Door Strike:
Extended Lip Strike
Product Category:
Parts and Accessories
Department:
Door Hardware

Don-Jo EL-115-619-RC – Frequently Asked Questions

1) Will the Don-Jo EL-115-RC extended lip strike fit a frame prepped for a radius corner strike?
Radius corner, yes. The EL-115-RC has a rounded corner profile, so it drops into a frame lip prepped for radius corner strikes rather than a square corner cutout. If the existing cutout in your frame has sharp square corners, the radius profile will leave a visible gap at the corners and you want a square corner strike instead.
2) What size is the Don-Jo EL-115-RC strike, and how is the lip width measured?
The EL-115-RC measures 2-1/4 inches in height by 1-1/2 inches in width, in 18 gauge (.050) steel. The width matters more than it looks: it is measured from the center of the screw hole to the end of the lip, not overall face width. So compare it against how far your latch has to reach past the frame face, not against the overall size of the strike you pulled off.
3) Will the Don-Jo EL-115-RC work with a standard commercial cylindrical latch?
One latch hole, sized for standard commercial latch sets, so a typical cylindrical lockset or passage latch engages it directly. It is a single-opening strike, not a two-hole strike for a lock with a separate deadbolt, so if your lock throws a deadbolt as well as a latch you need a two-hole strike rather than this one.
4) I need a strike for a pair of doors with an exit device. Is this the right part?
No. The EL-115-RC is a lip strike for a single latch in a frame jamb. For a double door application with exit devices, the Detex 92 Strike Kit is the double door strike kit, supplied with tamper resistant fasteners, from the 90 Strike Series. Use that where the strike has to serve the pair rather than a jamb-mounted latch.
5) Can I use the Don-Jo EL-115-RC to replace a worn strike without redoing the frame prep?
It goes back into an existing radius corner cutout that measures 2-1/4 by 1-1/2 inches, using the same two screw holes, so a like-for-like swap is a five minute job. Pull the old strike first and check two things: the corner shape (radius, not square) and where the screw hole centers land relative to the lip. If your old plate is square cornered or a different height, the frame needs filing or a different strike.
6) Is the Detex 92 strike kit a substitute for the Don-Jo EL-115-RC extended lip strike?
No. The Don-Jo EL-115-RC is an extended lip strike with a radius corner, 2-1/4 inch height by 1-1/2 inch width measured from the center of the screw hole to the end of the lip, in 18 gauge (.050) steel with a single latch hole for a standard commercial latch. The Detex 92 Strike Kit is a double door strike kit from the 90 Strike Series supplied with tamper resistant fasteners, so it is bought for a pair of doors and comes as a kit rather than as a single flat lip strike. If the frame prep is for a conventional single latch strike, the EL-115-RC is the part that matches it.
7) What is the difference between a Trimco 1260P pipe adapter strike and a Don-Jo EL-115-RC?
They solve different openings. The Trimco 1260P is a pipe adapter strike from the 1260 Series, sold as the strike only, and it is the part used when the latch has to land on a round pipe or tube rather than a flat frame face. The Don-Jo EL-115-RC is a flat extended lip strike with a radius corner, 2-1/4 inch by 1-1/2 inch in 18 gauge steel, with the lip extended to carry the latch across to a face that sits back from the latch. Choose by what the latch is striking: tube or pipe points to the 1260P, a flat hollow metal or wood frame points to the EL-115-RC.
8) Why would I use an extended lip strike instead of a standard strike plate?
An extended lip strike is what you reach for when the door is set back from the frame face, when there is heavy trim or a thick jamb casing, or when the latch would otherwise catch the edge of the frame on closing. The longer lip carries the latch across that gap and guides it into the pocket. On a flush installation with no setback, a standard lip strike does the same job with less metal hanging into the opening. The EL-115-RC gives you 1-1/2 inches from screw hole center to the end of that lip.
9) Is the Don-Jo EL-115-RC strike handed, and do I need to specify left or right?
The lip has to point the way the door swings, so measure your existing strike lip direction before ordering the EL-115-RC. Order the finish you need and match the lip orientation to the opening.
10) What finishes does the Don-Jo EL-115-RC extended lip strike come in?
Eight finishes, which is the point if you are standardizing a building: 605 polished brass, 609 antique brass, 619 satin nickel, 620 antique nickel, 622 matte black, 629 bright stainless, 630 satin stainless, and DU duronodic brown. For most commercial work the match is 630 satin stainless against 626 satin chrome lever trim, or 622 against black hardware. If your other openings are polished brass 605, take 605 here.
11) My door latches into a pipe or round post, not a flat jamb. Will this strike mount to it?
Not to a round section. The EL-115-RC is a flat plate strike that fastens to a flat frame face. Where the latch has to catch on pipe, the Trimco 1260P pipe adapter strike is the part built for that condition.
12) The frame has square corner strike prep - can the Don-Jo EL-115-RC still be used?
The EL-115-RC is the radius corner version of the EL 115 extended lip strike, 2-1/4 inch by 1-1/2 inch in 18 gauge (.050) steel with one latch hole. A radius corner strike set into a square corner cutout leaves a small gap at each corner, so match the corner profile to the existing prep where the appearance matters. It is offered in 605 polished brass, 609 antique brass, 619 satin nickel, 620 antique nickel, 622 matte black, 629 bright stainless, 630 satin stainless and DU duronodic brown, so the finish can be matched to the other strikes on the run.
13) Is 18 gauge steel heavy enough for a strike on a high traffic commercial door?
18 gauge (.050) steel is commercial-grade stock for a lip strike, and Don-Jo rates the EL-115-RC for commercial openings, office buildings, schools, healthcare, retail, warehouse and multi-tenant residential included. On an opening that takes real abuse, the strike is rarely the failure point compared to the frame prep behind it, so the heavier concern is whether the jamb is reinforced.
How fast can I get the Don-Jo EL-115-619-RC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo EL-115-619-RC come with a warranty?
Absolutely. The Don-Jo EL-115-619-RC is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo EL-115-619-RC?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo EL-115-619-RC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!