Don-Jo IP-34-LHR IP-34 Interme...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$253.46
$222.63
Don-Jo IP-34-LHR IP-34 Intermediate Pivot 5" x 4-1/4" with 3/4" Offset, Left Hand Reverse, Heavy Duty Fire Rated

Don-Jo IP-34-LHR IP-34 Intermediate Pivot 5" x 4-1/4" with 3/4" Offset, Left Hand Reverse, Heavy Duty Fire Rated

(No reviews yet) Write a Review

Model: IP-34-626-LHR
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$253.46
$222.63
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo IP-34 Intermediate Pivot 5" x 4-1/4" with 3/4" Offset — Heavy Duty, Fire Rated

The Don-Jo IP-34 Intermediate Pivot is a heavy-duty, non-ferrous door pivot engineered for demanding commercial applications. Measuring 5" x 4-1/4" with a 3/4" offset and a thickness of 5/16", this left-hand reverse (LHR) pivot delivers a rated load capacity of 600 lbs and carries a 3-hour fire rating, making it an ideal solution for high-traffic, code-compliant door installations. Supplied with 8 wood screws and 8 machine screws, it is ready for immediate installation on standard offset-hung doors.

Key Features

  • Precise Dimensions: 5" width x 4-1/4" height x 5/16" thickness with a 3/4" pivot offset for accurate offset-hung door alignment in commercial applications.
  • Heavy-Duty Load Capacity: Rated to support doors weighing up to 600 lbs, providing reliable performance in the most demanding high-traffic environments.
  • 3-Hour Fire Rating: Meets a 3-hour fire-rated door assembly requirement, supporting life-safety and building code compliance in commercial facilities.
  • Non-Ferrous Construction: Manufactured from non-ferrous material for excellent corrosion resistance and long-term durability in commercial door applications.
  • Left Hand Reverse (LHR) Handing: Specifically configured for left-hand reverse door installations, ensuring proper fit and function without field modification.
  • Complete Fastener Package: Includes 8 wood screws and 8 machine screws to accommodate a variety of door and frame substrate types right out of the box.
  • Multiple Finish Options: Available in finishes 613 and 626 to coordinate with existing door hardware and architectural requirements.
  • ANSI Compliance: Conforms to ANSI CO7321 for standardized performance and interchangeability in commercial door hardware systems.

Certifications & Compliance

  • ANSI CO7321 Compliant
  • 3-Hour Fire Rated
  • Heavy Duty Duty Level
  • Commercial Grade

Technical Specifications

  • Subcategory: Door Pivots
  • Product Group: Door Hinges and Pivots
  • Product Subgroup: Pivots and Pivot Sets
  • Product Type: Pivot Hinges
  • Commercial/Residential: Commercial
  • Hang Type: Offset Hung
  • Duty Level: Heavy Duty
  • Fire Rated Time: 3 hours
  • Electronic: No
  • Door Weight: Up to 600 lbs
  • Application: Standard Door
  • Product Attribute: Pivots
  • Fire Rating: Yes
  • Product Category: Door Hinges and Pivots
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities and Schools
  • Healthcare Institutions and Hospitals
  • Government and Municipal Buildings
  • Retail and Hospitality Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential and Mixed-Use Properties

Why Don-Jo IP-34?

Don-Jo IP-34 Intermediate Pivots are built from non-ferrous material and engineered to support loads up to 600 lbs, meeting ANSI CO7321 standards and a rigorous 3-hour fire rating. Designed for professional commercial door installations where dependable, code-compliant performance is non-negotiable, the IP-34 delivers the precision and durability that demanding applications require.

Manufacturer Resources

DON-JO Hinges

Product Specs

Subcategory:
Door Pivots
Product Group:
Door Hinges and Pivots
Product Subgroup:
Pivots and Pivot Sets
Product Type:
Pivot Hinges
Commercial/Residential:
Commercial
Hang Type:
Offset Hung
Pivot Offset:
3/4"
Type of Pivot:
Intermediate
Duty Level:
Heavy Duty
Fire Rated Time:
3 hours
Electronic:
No
Door Weight:
Up to 600 lbs
Pivot Type:
Intermediate
Mounting Method:
Offset
Application:
Standard Door
Product Attribute:
Pivots
Product Model:
IP 34 LHR
Fire Rating:
Yes
Product Category:
Door Hinges and Pivots
Product Substrate:
Non-Ferrous
Department:
Door Hardware

Don-Jo IP-34-626-LHR – Frequently Asked Questions

1) What is an intermediate pivot and do I need one on my door?
An intermediate pivot is the middle pivot in an offset-hung door setup. It doesn't carry the door on its own the way a bottom pivot and top pivot do, it shares the load and keeps a heavy door from twisting or sagging between them. The Don-Jo IP-34 is that middle piece, rated for doors up to 600 lbs. If you're hanging a heavy commercial door on 3/4 inch offset pivots, you'll typically add one or more intermediates between the top and bottom. If your door is center-hung or on butt hinges, this is not the part.
2) Is the Don-Jo IP-34 handed, and how do I know if I need LHR?
Handed, yes. The IP-34-LHR is built specifically for left hand reverse openings and cannot be flipped in the field. LHR means you stand outside the door, the hinge side is on your left, and the door swings toward you. Get the handing wrong and the offset sits on the wrong side of the opening. Confirm the hand at the opening before you order, because an intermediate pivot has to match the top and bottom pivots already on that door.
3) What size is the Don-Jo IP-34 intermediate pivot and what offset does it use?
It measures 5 inches by 4-1/4 inches with a 5/16 inch thickness, and it works on a 3/4 inch offset. That 3/4 inch figure is the one that has to match: 3/4 inch offset is the standard for offset-hung commercial doors, and the intermediate has to use the same offset as the top and bottom pivots and the closer you already have on the opening.
4) Which pivot should I use if the opening is a fire rated door assembly?
The Don-Jo IP-34 carries a fire rating with a 3 hour fire rated time, which is what a rated assembly needs from the hanging hardware. Among the other pivots, the McKinney PH-4 pocket pivot hinge is also fire rated, though it is a standard duty pocket pivot rather than a heavy duty offset intermediate pivot. The Deltana PB985 pivot base and the PH35, PH40 and PH60 pivot hinges are all listed as not fire rated, so none of them belong on a rated opening regardless of how the geometry lines up.
5) What is the closest alternative to the Don-Jo IP-34 intermediate pivot for a 3/4 inch offset flush door?
For a flush door hung on a 3/4 inch offset, the International Door Closers OP-3001 and OP-4001 offset pivot sets are the nearest peers, both handed 3/4 inch offset pivot sets for flush doors, from the 3000 and 4000 Series respectively. The difference in scope matters: the IP-34 is an intermediate pivot on its own, used at the mid-point of an offset-hung door alongside top and bottom pivots, while the OP-3001 and OP-4001 are supplied as pivot sets. Match the 3/4 inch offset first, then confirm you are ordering the piece the opening is missing.
6) Is there a non-handed offset pivot option instead of ordering left hand reverse?
Yes. The International Door Closers OP-2700 is a 3/4 inch offset pivot set for flush doors that is non-handed, so one part number covers openings of either hand. The Don-Jo IP-34 is supplied handed, with left hand reverse a separate configuration, and it is an intermediate pivot rather than a set. If you are stocking for a mixed building and want to avoid tracking handing, the non-handed OP-2700 set is the one to look at; if you need a single intermediate pivot to match an existing LHR offset-hung door, the IP-34 is the direct fit.
7) My door is recessed rather than flush - can I still use the Don-Jo IP-34?
The IP-34 is specified for standard offset-hung door applications. If the leaf is recessed, look instead at the International Door Closers OP-6001/OP-6002, a 3/4 inch offset pivot set made for 7/64 inch recessed doors. Same 3/4 inch offset geometry, but the set is cut for the recess rather than a flush face, so the door edge clearance works out correctly.
8) Do I need to buy screws separately for this pivot?
No, fasteners come with it. Each IP-34 ships with 8 wood screws and 8 machine screws, so it covers both wood and metal door and frame substrates without a separate trip to the fastener bin.
9) Can I standardize this pivot across an office or school with heavy entrance doors?
That's the application it's built for. Heavy duty, commercial, non-ferrous, rated to 600 lbs and 3 hours fire, and it conforms to ANSI CO7321, which is what makes it interchangeable within a standard commercial pivot program. The catch for a fleet buy is handing: this one is left hand reverse only, so you'll need to count your LHR openings and order the matching hand for the rest.
10) What is a lighter duty pivot than the Don-Jo IP-34 for an interior door that does not need 600 lb capacity?
The Don-Jo IP-34 is a heavy duty commercial pivot rated for doors up to 600 lbs. For a lighter interior leaf, the Deltana PH35 pivot hinge at 3-7/8 inch x 5/8 inch x 1-5/8 inch and the PH40 at 4-3/8 inch x 5/8 inch x 1-7/8 inch are both solid brass light duty pivot hinges sold as pairs. The Deltana PH60, 4-3/8 inch x 5/8 inch x 1-7/8 inch, sits at heavy duty if you want more capacity in that same smaller solid brass format. None of the three is fire rated, so keep them off rated openings.
11) Will this pivot rust in a pool room, coastal, or wash-down area?
The IP-34 is non-ferrous, which is why it holds up in damp and corrosive environments better than a plated steel pivot. Finish options are 613 satin bronze oil-rubbed and 626 satin chrome, so you can match it to the rest of the trim on the opening.
12) Does the IP-34 pivot have any electrical or power transfer option?
No. It's a purely mechanical pivot with no electrified option, so if you need power through the door for an electric latch or access control, you'll need a separate electric power transfer or a door loop alongside it.
How fast can I get the Don-Jo IP-34-626-LHR delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo IP-34-626-LHR come with a warranty?
Absolutely. The Don-Jo IP-34-626-LHR is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo IP-34-626-LHR?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo IP-34-626-LHR from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!