Don-Jo T9102 Extended Lip T St...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$19.59
Don-Jo T9102 Extended Lip T Strike in Non-Ferrous Material, 2-3/4" x 2"

Don-Jo T9102 Extended Lip T Strike in Non-Ferrous Material, 2-3/4" x 2"

(No reviews yet) Write a Review

Model: T9102-605
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$19.59
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo T9102 Extended Lip T Strike in Non-Ferrous Material, 2-3/4" x 2"

The Don-Jo T9102 is a commercial-grade Extended Lip T Strike crafted from non-ferrous material, delivering reliable latch engagement and long-lasting corrosion resistance for demanding door hardware applications. Measuring 2-3/4" in height and 2" in width — with the width measured from the center of the screw hole to the end of the lip — this strike is precision-formed at 18-gauge (.050) thickness for consistent strength and dimensional accuracy. Featuring a single latch hole and available in multiple finishes including 605, 609, 622, and 630 DU, the T9102 is a versatile solution for commercial door installations requiring a dependable, extended-lip strike profile.

Key Features

  • Precise Dimensions: 2-3/4" height and 2" width (measured from center of screw hole to end of lip) for accurate, code-compliant installation on commercial doors.
  • 18-Gauge Non-Ferrous Construction: Formed at 18 ga. (.050) thickness from non-ferrous material, providing excellent corrosion resistance and structural integrity in high-use environments.
  • Extended Lip T Strike Design: Extended lip profile ensures reliable latch capture and positive door retention, reducing the risk of misalignment over time.
  • Single Latch Hole Configuration: One latch hole design simplifies installation and suits a wide range of standard latch bolt applications.
  • Multiple Finish Options: Available in finishes 605, 609, 622, and 630 DU to coordinate with existing door hardware and architectural requirements.
  • Commercial-Grade Application: Designed and rated for commercial use, making it suitable for high-traffic door openings in a variety of building types.
  • Convenient Shelf Pack Quantity: Sold in shelf packs of 10, supporting efficient inventory management for contractors and distributors.

Certifications & Compliance

  • Commercial-Grade Product — Rated for Commercial Applications
  • Non-Ferrous Substrate — Corrosion-Resistant Material Construction

Technical Specifications

  • Subcategory: Door Strikes
  • Product Group: Parts and Accessories
  • Product Subgroup: Door Strikes and Strike Boxes
  • Product Type: Door Strikes
  • Commercial/Residential: Commercial
  • Product Category: Parts and Accessories
  • Product Substrate: Non-Ferrous
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo T9102?

Don-Jo T9102 Extended Lip T Strike products are engineered for professional-grade performance, combining 18-gauge (.050) non-ferrous construction with an extended lip profile that ensures consistent latch engagement in demanding commercial environments. The T9102's corrosion-resistant material and precise 2-3/4" x 2" dimensions make it a dependable choice for contractors and facility managers who require reliable, long-lasting door strike solutions across a wide range of commercial applications.

Manufacturer Resources

DON-JO Strike Plates

Product Specs

Subcategory:
Door Strikes
Product Group:
Parts and Accessories
Product Subgroup:
Door Strikes and Strike Boxes
Product Type:
Door Strikes
Commercial/Residential:
Commercial
Product Model:
T9102
Door Strike:
Extended Lip T Strike
Product Category:
Parts and Accessories
Product Substrate:
Non-Ferrous
Department:
Door Hardware

Don-Jo T9102-605 – Frequently Asked Questions

1) What size is the Don-Jo T9102 T strike and how is the 2 inch width measured?
The T9102 T strike measures 2-3/4 inches in height by 2 inches in width, and that 2 inch figure is measured from the center of the screw hole to the end of the lip, not across the whole face. That matters when you are checking whether the lip will reach past your door stop or trim: the lip projection is part of that 2 inches, so measure from your existing screw centerline out to where you need the latch ramp to land.
2) Is the Don-Jo T9102 strike a single latch hole or does it have a deadbolt cutout too?
Single latch hole. The T9102 is a one-hole strike, so it suits a latchbolt only. If your opening has a lockset with a separate deadbolt above it, you need either a second strike for the deadbolt or a two-hole strike, not this one.
3) How thick is the Don-Jo T9102 strike, and will it sit flush in an existing mortise?
The T9102 is formed at 18 gauge, .050 inch thick. In a jamb already mortised for a standard commercial strike, that .050 thickness is what decides whether the face sits flush or proud, so check the depth of the existing pocket against .050 before you screw it in. A shallower pocket means routing a touch deeper rather than letting the strike stand off the frame and hold the door open.
4) Does the T9102 strike work on a pair of doors with no mullion?
No. The T9102 is a single-hole jamb strike for a latchbolt landing in a frame. A pair of doors with no center mullion needs a strike made for that condition, such as the Detex 92 Strike Kit, which is a double door strike kit supplied with tamper resistant fasteners. Use the T9102 on the single leaf openings and the double door kit where two leaves meet.
5) Is the Detex 92 strike kit a substitute for the Don-Jo T9102 extended lip T strike?
No - they solve different problems. The Don-Jo T9102 is an extended lip T strike for a standard latch bolt opening, 2-3/4 inch high by 2 inch wide with a single latch hole, formed in 18 ga. (.050) non-ferrous material. The Detex 92 Strike Kit is a double door strike kit from the 90 Strike Series supplied with tamper resistant fasteners, intended for a double door application and packaged as a kit rather than as a single formed strike plate. If you are replacing one damaged or misaligned strike on a single leaf and need the lip to reach past the frame face, the T9102 is the part; a double door exit application is where the Detex 92 kit belongs.
6) Why would I use an extended lip strike instead of a standard face strike?
An extended lip is what you reach for when the latch has to travel past a thick stop, applied trim, or a wide gap between the door edge and the frame face. The T9102 carries the lip out to 2 inches from the screw hole centerline so the latch bolt rides the ramp instead of catching the edge of the jamb. On a flush frame with a normal gap, a standard-lip strike is the simpler part; the extended lip is for the openings where the latch is landing short.
7) Will a non-ferrous door strike hold up in a wet or coastal location?
Non-ferrous is the reason to pick the T9102 for those openings. The substrate is non-ferrous rather than steel, so it does not rust out the way a plated steel strike does at an exterior door, a pool corridor, a locker room, or a coastal building. It is a commercial-rated part, so the intent is high-traffic openings, not residential duty.
8) What finishes does the Don-Jo T9102 T strike come in for matching existing door hardware?
Five finishes: 605 polished brass, 609 antique brass, 622 matte black, 630 satin stainless steel, and DU duronodic brown coated. For a property manager matching a run of doors, 630 is the one that lines up with the satin stainless and satin chrome levers on most commercial openings, and DU is the match for dark bronze aluminum storefront and entrance hardware.
9) Is the Don-Jo T9102 the right strike for a chain link or pipe frame gate?
It is not. The T9102 mounts to a flat jamb face with screws. For a round pipe frame, you want a strike built to wrap the pipe, such as the Trimco 1260P pipe adapter strike, which is sold as a strike only. Trying to force a flat T strike onto round tube gives you no bearing surface behind the lip.
10) What is the difference between a Don-Jo T9102 T strike and a Trimco 1260P pipe adapter strike?
The Don-Jo T9102 is a flat, extended lip T strike that mounts to a door frame and captures a standard latch bolt, sized 2-3/4 inch by 2 inch with a single latch hole in 18 ga. (.050) non-ferrous material, and offered in 605 polished brass, 609 antique brass, 622 matte black, 630 satin stainless steel, and DU duronodic brown coated. The Trimco 1260P from the 1260 Series is a pipe adapter strike, sold as strike only, and is meant to adapt a latch to a pipe or tubular frame condition rather than a conventional flat frame. Match the strike to what the latch is actually striking: a standard frame with an extended lip requirement takes the T9102, a pipe frame condition takes the pipe adapter.
11) Can I buy one Don-Jo T9102 strike, or do they come in a pack?
The T9102 is sold in shelf packs of 10. That works in your favour if you are standardizing a building or stocking a truck, since you get a matched run of the same finish in one order, but it is worth knowing before you order for a single door repair.
How fast can I get the Don-Jo T9102-605 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo T9102-605 come with a warranty?
Absolutely. The Don-Jo T9102-605 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo T9102-605?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo T9102-605 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!