Don-Jo ULP-111 Latch Protector...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$35.01
Don-Jo ULP-111 Latch Protector for Outswing Doors, 3-1/2" x 11.75", 12 Gauge Stainless Steel

Don-Jo ULP-111 Latch Protector for Outswing Doors, 3-1/2" x 11.75", 12 Gauge Stainless Steel

(No reviews yet) Write a Review

Model: ULP-111-630
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$35.01
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo ULP-111 Latch Protector for Outswing Doors, 3-1/2" x 11.75", 12 Gauge Stainless Steel

The Don-Jo ULP-111 is a heavy-duty latch protector engineered specifically for outswing doors, providing a reliable barrier against forced entry and latch manipulation. Constructed from 12-gauge stainless steel (.104 thickness) and measuring 3-1/2" wide by 11.75" long, this latch protector delivers robust protection in a commercial-grade package. Compatible with lever locks, mortise locks, and exit devices, the ULP-111 offers broad versatility across a wide range of door hardware configurations. Finished in 630 satin stainless steel, it combines lasting corrosion resistance with a professional appearance suited to demanding commercial environments.

Key Features

  • Precise Dimensions: Measures 3-1/2" wide by 11.75" long, providing comprehensive coverage of the latch area on outswing doors.
  • Heavy-Gauge Construction: Fabricated from 12-gauge stainless steel (.104 thickness) for exceptional rigidity and resistance to forced-entry attempts.
  • Outswing Door Design: Specifically engineered for out-swing door applications, ensuring a proper fit and maximum latch protection where it is needed most.
  • Broad Hardware Compatibility: Works with lever locks, mortise locks, and exit devices, making it a versatile solution across a wide variety of commercial door hardware installations.
  • Stainless Steel Material: Corrosion-resistant stainless steel construction ensures long-term durability in high-traffic and demanding commercial settings.
  • 630 Satin Stainless Finish: The 630 finish delivers a clean, professional aesthetic that complements standard commercial door hardware finishes.
  • Commercial-Grade Quality: Designed and rated for commercial applications, meeting the performance demands of offices, institutions, and high-use facilities.

Technical Specifications

  • Subcategory: Latches & Catches
  • Product Group: Door Trim and Accessories
  • Product Subgroup: Door Trim and Latch Protection
  • Product Type: Latch Protectors
  • Commercial/Residential: Commercial
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo ULP-111?

Don-Jo latch protector products are built to commercial-grade standards, with the ULP-111 featuring 12-gauge stainless steel (.104 thickness) construction that resists forced entry and withstands the rigors of high-traffic door applications. Its compatibility with lever locks, mortise locks, and exit devices makes it a dependable, versatile choice for security-conscious commercial installations where consistent performance and long-term durability are essential.

Manufacturer Resources

DON-JO Latch Protectors

Product Specs

Subcategory:
Latches & Catches
Product Group:
Door Trim and Accessories
Product Subgroup:
Door Trim and Latch Protection
Product Type:
Latch Protectors
Commercial/Residential:
Commercial
Door Swing:
Out Swing
Product Model:
ULP 111
Product Category:
Door Trim and Accessories
Product Substrate:
Stainless Steel
Department:
Door Hardware

Don-Jo ULP-111-630 – Frequently Asked Questions

1) Will the Don-Jo ULP-111 latch protector work on an inswing door?
No. The ULP-111 is built for out-swing doors, where the latch and strike gap are exposed on the pull side and can be pried or shimmed. On an inswing door the latch edge faces into the room and needs a different guard entirely, so ordering this one for an inswing opening gets you a plate that does not sit where the vulnerability is.
2) Does the ULP-111 latch guard work with a mortise lock or an exit device, or only cylindrical lever locks?
All three. The ULP-111 is stated to work with lever locks, mortise locks, and exit devices, and its 11.75 inch length is what makes that possible, it covers a long enough run of the latch edge to shield a mortise latch or the latch end of a rim exit device rather than just a single cylindrical latch.
3) What is an alternative to the Don-Jo ULP-111 latch protector for an outswing commercial door?
The Trimco PG8000 Series panic and latch guards cover the same job on outswing openings. The ULP-111 is a single fixed size, 3-1/2 inches wide by 11.75 inches long in 12-gauge stainless steel with a 630 satin stainless finish, so it is a one-part decision. The PG8000 is a series of panic and latch guards, which means guard length and configuration are selected within the series to suit the device on the door. If the opening carries an exit device and the guard has to clear the device end cap, the series approach gives you a size to match; if you are covering a lever or mortise latch on a standard outswing door, the fixed ULP-111 size is already the common one.
4) Can I use the Don-Jo ULP-111 on an inswing door?
No. The ULP-111 is built for out swing doors, where the latch and strike gap are exposed on the pull side and the guard mounts to the door to block manipulation. An inswing opening exposes nothing from the outside in the same way and calls for a different part, typically a strike-side wrap or a door edge guard rather than an outswing latch protector. Do not order the ULP-111 as a general purpose latch cover; the swing direction is the deciding spec, not the size or the finish.
5) What size is the Don-Jo ULP-111 latch protector and how much of the door edge does it cover?
It measures 3-1/2 inches by 11.75 inches. That gives you roughly six inches of coverage above and below the latch centerline on a typical lock height, which is what shields the strike gap from a pry bar or shim. Check the plate does not foul a closer arm bracket or a vertical rod housing on doors carrying both.
6) Is 12 gauge stainless steel heavy enough for a latch guard on a high traffic commercial door?
12 gauge works out to .104 inch thick stainless, which is the heavy end for a latch guard and the reason this one is spec'd as commercial rather than residential. Stainless also means it holds up on exterior openings where a plated steel guard would rust at the fastener holes. For schools, healthcare corridors, and warehouse exteriors that is the material you want.
7) Will a 630 satin stainless latch guard match the lever sets and push bars already on my building's doors?
630 satin stainless is the standard commercial finish, so it lines up with the satin stainless levers, exit devices, and kick plates already hung on most commercial openings. The ULP-111 is offered in 630 only, which is the practical answer for a property manager standardizing a fleet of doors, one finish, no matching exercise.
8) What else could I use instead of the Don-Jo ULP-111 latch guard?
Trimco's PG8000 Series panic and latch guards cover the same job from another manufacturer. Going that route matters most if you are already standardized on Trimco trim across a facility and want the guards to come from the same line. If the decision is just about the opening itself, the ULP-111 answers it at 3-1/2 by 11.75 inches in 12 gauge stainless.
9) Do I need a latch protector on an outswing exterior door, or is a good deadbolt enough?
They solve different attacks. A deadbolt resists the door being forced open; a latch guard stops someone reaching the exposed latch and strike gap on an outswing door with a shim, pry bar, or spreader. On outswing exterior openings the latch face is on the attack side no matter what lock you hang, which is why a guard like the ULP-111 gets specified alongside the lock rather than instead of it.
10) The opening has an exit device instead of a lever lock. Does that change the latch guard choice?
Not necessarily. The Don-Jo ULP-111 is stated to work with lever locks, mortise locks, and exit devices, so a single 3-1/2 inch by 11.75 inch guard covers all three hardware types on an outswing door. The Trimco PG8000 Series is described as panic and latch guards, so it also addresses exit-device openings. The practical difference is that the ULP-111 is one fixed size that has to suit the device already on the door, while the PG8000 is a series of guards from which a matching part is selected. Measure the vertical run you need to cover from the latch to the device mounting before deciding.
11) Is the Don-Jo ULP-111 suitable for a residential entry door, or should I look at something else?
The ULP-111 is a commercial part. It is 12-gauge stainless steel at .104 thickness in a 630 satin stainless finish, sized 3-1/2 by 11.75 inches, and intended for offices, schools, healthcare, retail, warehouses, multi-tenant residential, and government buildings. On a single-family entry door with an inswing residential lockset, it is both the wrong swing and heavier than the opening calls for. On the exterior outswing doors of an apartment or condo property, which fall under multi-tenant residential, it is the intended application.
12) I need to standardize latch guards across a whole facility. Does one part cover every outswing door?
On outswing openings, the Don-Jo ULP-111 gets you close to a single line item: one size at 3-1/2 by 11.75 inches, one finish at 630 satin stainless, and stated compatibility with lever locks, mortise locks, and exit devices, which covers most of what is hung in a commercial building. Where a door will not take the fixed size, the Trimco PG8000 Series gives you a range of panic and latch guards to fall back on for the exceptions. A common approach is to spec the ULP-111 as the standard and survey the outliers before ordering.
How fast can I get the Don-Jo ULP-111-630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo ULP-111-630 come with a warranty?
Absolutely. The Don-Jo ULP-111-630 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo ULP-111-630?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo ULP-111-630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!