Dortronics 4000 Series - 24 Volt Plug-in Power Supply (1 Amp @ 24VDC), AC to DC Transformer, for Use with 1100 Maglocks
- Plug in power transformer, 1 AMP at 24VDC
Manufacturer Resources
Product Specs
- Product Group:
- Electronic Access Controls
- Series:
- 4000 Series
- Product Subgroup:
- Controllers, Power Supplies and Transformers
- Product Type:
- Plug Ins
- Subcategory:
- Power Distribution
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Product Model:
- 4024
- Product Category:
- Electronic Access Controls
- Department:
- Door Hardware
Dortronics 4024 – Frequently Asked Questions
1) What power supply do I need for a Dortronics 1100 Series maglock?
The Dortronics 4024 plug-in transformer is the matched supply for the 1100 Series maglocks. It converts AC wall power to 24VDC at 1 amp, so it drives the lock directly with no separate rectifier or filtered supply in between. It plugs into a receptacle rather than mounting in an enclosure, which is why it suits a single opening rather than a multi-door head end.
2) Is the Dortronics 4024 a 12 volt or 24 volt supply?
24VDC only. The 4024 is offered in a single voltage, so there is no 12 volt version of it to order. If the maglock or strike on your door is a 12VDC device, this is the wrong transformer for it.
3) Will a 1 amp transformer be enough to run more than one maglock?
The 4024 delivers 1 amp at 24VDC total, and that is the ceiling for everything hanging off it. Add up the holding current of each lock plus anything else on the same run (keypad, reader, timer) and stay under 1 amp. For a bank of doors or a shared head end, you want a rack or enclosure-mounted supply sized to the full load rather than a plug-in unit like this one.
4) Does the Dortronics 4024 output AC or DC power?
DC. It is an AC to DC transformer, taking wall AC and putting out regulated 24 volts DC. Maglocks and most electric strikes with a DC coil need that conversion. A device that calls for 24VAC will not run correctly off it.
5) Do I need a separate power supply cabinet or backup battery with the 4024?
No cabinet is involved. The 4024 is a plug-in unit that goes straight into a receptacle, so there is no enclosure, no battery charger circuit, and no standby battery. If your egress scheme or fire alarm interface requires the lock to stay powered through an outage, you need a supply built with battery backup instead of this one.
6) Is this Dortronics transformer rated for commercial door hardware use?
Yes, the 4024 is a commercial-grade access control component from the Dortronics 4000 Series, intended for electrified door hardware rather than consumer electronics.
How fast can I get the Dortronics 4024 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Dortronics 4024 come with a warranty?
Absolutely. The Dortronics 4024 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Dortronics 4024?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Dortronics 4024 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.