Dual Range NCVT with Receptacle Tester Electrical Test Kit
NCVT2PKIT - spec sheet
Features
- Conditions the Receptacle Tester indicates - wiring correct, open ground, reverse polarity, open hot, open neutral, hot/ground reversed
- Two Distinctive Modes on NCVT-2P: 70 to 1000V AC and 12 to 1000V AC
- Receptacle Tester is designed to detect the most common wiring problems in standard receptacles
- Kit contains a non-contact voltage tester and receptacle tester
- Screw-thread battery cap with O-ring ensures protection against dust and water ingress for the NCVT-2P
- Dual range NCVT-2P automatically detects and indicates low voltage range and standard voltage (48-1000V AC)
- NCVT-2P provides non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires
- NCVT-2P is a lightweight, compact tool with pocket clip for convenient storage and quick access
- CAT IV 1000 Volt rating provides expanded operation and protection
Warnings
- Read, understand, and follow all warnings, cautions, safety information, and instructions in the manual before operating or servicing this tester. Failure to follow instructions could result in death or serious injury.
- Never assume neutral or ground wires are de-energized. Neutrals in multi-wire branch circuits may be energized when disconnected and must be retested before handling.
NCVT2PKIT - spec sheet
Manufacturer Resources
Product Specs
- Batteries:
- 2 x AAA
- Battery Life:
- 142 hr
- Drop Protection:
- NCVT2P - 6.6' (2 m); RT105 - 3.3' (1 m)
- Frequency:
- 50 - 500 Hz
- Ingress Protection:
- NCVT-2P - IP54
- Item Depth:
- 9.6300 in
- Item Height:
- 1.7500 in
- Item Weight:
- 0.2990 lbs
- Item Width:
- 5.1300 in
- Material:
- Polycarbonate
- Overall Height:
- 1.1" (2.8 cm)
- Overall Length:
- 5.8" (14.8 cm)
- Overall Width:
- 0.9" (2.2cm)
- Pollution Degree:
- NCVT-2P - 2
- Standard:
- NCVT-2P: CAT IV 1000V; RT105: CAT II 125V
- Type:
- Dual Range for NCVT-2P
- Voltage:
- 12 - 1000V AC
- Weight:
- 1.7 oz (48 g)