You may also like
DynaLock 6700 Series Pushplates
Model 6754 Recessed Single Gang, Momentary DPDT
6700 & 6800 Series Pushplates are heavy duty egress controls machined
from solid aluminum with engraved “PUSH TO EXIT” signage. Multiple
switching configurations and finishes are available. Narrow recessed models
are specifically designed for installation in aluminum store front frames,
requiring minimal cut-out/preparation. All momentary models feature “all
active” operation. Consult factory for special engraving.
Standard finish - Satin Aluminum US28
PTD Contact Rating: 10 A @ 125VAC
All Others: 6 A @ 125VAC
Manufacturer Resources
Product Specs
- Subcategory:
- Push Buttons
- Series:
- 6700
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Sensors, Switches, Relays and Timers
- Product Type:
- Switches / Push Buttons
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Duty Level:
- Heavy Duty
- Product Model:
- 6754
- Product Finish:
- Satin Aluminum (US28)
- Product Category:
- Electronic Access Controls
- Department:
- Door Hardware
DynaLock 6754 US26 – Frequently Asked Questions
1) Should I use a recessed narrow pushplate or a surface mount exit button?
Recessed narrow plates like the DynaLock 6754 are the choice when the button has to live in a narrow aluminum storefront stile, where there is no room for a surface box. Where you have drywall and a standard back box, a surface or flush round button such as the Securitron PB3 or the RCI 950 Series round push plate is easier to mount. If the code requirement is an emergency release rather than routine egress, look at the Securitron EEB emergency exit push button or the ACSI 1320-1-MOM-ER, which is marked "Emergency Release".
2) What is the closest alternative to the DynaLock 6754 pushplate for a narrow aluminum storefront stile?
The DynaLock 6754 is a recessed single gang, momentary DPDT pushplate machined from solid aluminum with engraved PUSH TO EXIT signage, and the narrow recessed models are designed for aluminum store front frames with minimal cut-out. If you need another narrow-profile switch for the same kind of stile, the Trine 342 is a narrow style electric door switch. The Trine unit is a switch rather than an engraved PUSH TO EXIT plate, so confirm whether the opening needs the egress signage.
3) If the door needs a maintained switch instead of a momentary one, what should I use instead of the DynaLock 6754?
The 6754 is a momentary DPDT pushplate, and all momentary DynaLock 6700 models feature all-active operation, so it releases only while pressed. For maintained operation, the RCI 908 Series electronic exit button with red EXIT text operates maintained, and the RCI 919 Series rotary release button is also a maintained device with a satin aluminum finish. Choose maintained where the lock must stay released until the switch is reset.
4) I need an ADA push plate for a handicap door opener, not an exit plate. Is the DynaLock 6754 the right part?
The 6754 is engraved PUSH TO EXIT and is intended as an egress control, so it is not the part for an accessible door operator actuator. The RCI 950 Series round push plate carries a handicap symbol and uses a momentary switch in satin stainless steel, which is the plate marking a barrier-free operator button calls for.
5) Do the momentary DynaLock 6700 pushplates use all-active contacts?
Yes. All momentary models in the 6700 and 6800 Series feature "all active" operation, meaning both poles of the DPDT switch transfer on the press rather than one set sitting idle. Useful when you need a normally closed break for the lock and a normally open make for an alarm shunt off the same button.
6) What finishes does the DynaLock 6754 pushplate come in, and which is standard?
Satin Aluminum US28 is the standard finish. Eight are offered: Bright Brass US3, Satin Brass US4, Light Bronze US10, Dark Bronze US10B, Medium Bronze US13, Black Satin US19, Bright Chrome US26, and Satin Aluminum US28. For a property manager matching a storefront, the bronzes and black satin line up with common anodized aluminum frame colors.
7) Is the pushplate already marked for egress or do I need a label?
The plate is engraved "PUSH TO EXIT" from the factory, machined into the solid aluminum rather than silkscreened, so it won't wear off in high traffic. Special engraving is handled by the factory on request.
8) What is a narrow-style alternative if I want a switch rather than a pushplate in a storefront stile?
The Trine 342 narrow style electric door switch is the narrow-frame alternative we carry. It suits the same tight aluminum stile situation as the DynaLock 6754 but is a switch rather than an engraved solid aluminum pushplate, so it does not carry PUSH TO EXIT marking.
9) What should I specify instead of the DynaLock 6754 if the code official wants an emergency release rather than a standard exit push?
The 6754 is a standard momentary DPDT egress pushplate engraved PUSH TO EXIT. For an emergency release device, the ACSI 1320-1-MOM-ER pushbutton switch is marked Emergency Release, and the Securitron EEB is an emergency exit push button with interchangeable LED lenses. Those are marked and built for the emergency release application rather than routine egress.
10) Which alternatives to the DynaLock 6754 offer an illuminated button?
The DynaLock 6754 is a solid aluminum recessed pushplate with engraved PUSH TO EXIT signage and no illumination. If the opening needs a lit device, the Securitron PB4L is an illuminated halo with a stainless push button and the Securitron PB5 is a medium round illuminated push button. Both are round buttons rather than a single gang engraved plate, so the frame prep differs.
11) What do I use if the exit control needs to be key operated instead of a push plate like the DynaLock 6754?
The 6754 releases the door with a momentary DPDT push action available to anyone at the opening, since all momentary 6700 models are all active. Where release must be restricted to authorized staff, the ACSI 1310-1 is a mortise keyswitch, which requires a key rather than a push to actuate.
12) Is the DynaLock 6754 pushplate rugged enough for a high traffic commercial entrance?
It is classed heavy duty and commercial only. The body is machined from solid aluminum rather than formed sheet, and the egress marking is engraved into the metal, which is the combination that holds up in a school, hospital, or retail vestibule where the plate gets hit hundreds of times a day.
13) Does the 6754 need an illuminated or lighted button instead?
The 6754 is a plain engraved plate with no lamp. If the specification calls for a lit button so occupants can find it in a dim corridor, the Securitron PB4L with its illuminated halo and stainless button, or the Securitron PB5 medium round illuminated push button, are the lighted options we carry.
How fast can I get the DynaLock 6754 US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DynaLock 6754 US26 come with a warranty?
Absolutely. The DynaLock 6754 US26 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DynaLock 6754 US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the DynaLock 6754 US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.