You may also like
DynaLock 6705 Series Handicapped Pushplates
Model 6795 Recessed Single Gang, Momentary DPDT
6705 & 6805 Series Handicapped Pushplates are heavy duty egress controls
machined from solid aluminum with blue engraved handicapped symbol.
Multiple switching configurations and finishes are available. Narrow recessed
models are specifically designed for installation in aluminum store front
frames, requiring minimal cut-out/preparation. All momentary models
feature “all active” operation.
Standard finish - Satin Aluminum US28
PTD Contact Rating: 10 A @ 125VAC
All Others: 6 A @ 125VAC
Manufacturer Resources
Product Specs
- Subcategory:
- Push Buttons
- Series:
- 6705
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Sensors, Switches, Relays and Timers
- Product Type:
- Switches / Push Buttons
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Duty Level:
- Heavy Duty
- Product Model:
- 6795
- Product Finish:
- Satin Aluminum (US28)
- Product Category:
- Electronic Access Controls
- Department:
- Door Hardware
DynaLock 6795 US26 – Frequently Asked Questions
1) Will the DynaLock 6795 pushplate mount in an aluminum storefront frame?
That is exactly what the narrow recessed 6795 is built for. DynaLock's narrow recessed models are designed for installation in aluminum store front frames and need only minimal cut-out and preparation, so you are not hogging out a wide opening in a narrow stile. It is a recessed single gang plate, so you are working to a single gang box footprint rather than a wide plate.
2) What are the electrical contacts rated for on the 6795 handicapped pushplate?
The 6795 is a momentary DPDT switch rated 6 A at 125VAC. DynaLock rates only its PTD contact configuration higher, at 10 A at 125VAC; every other switching configuration in the 6705 and 6805 series, including this one, is the 6 amp rating. Size your mag lock, strike, or relay load against 6 A at 125VAC, or switch a relay if the load is heavier.
3) What is the closest alternative to the DynaLock 6795 handicap pushplate if I need a round handicap push plate instead of a square single-gang plate?
The DynaLock 6795 is a recessed single gang handicapped pushplate with a momentary DPDT switch, machined from solid aluminum with a blue engraved handicapped symbol. If the opening calls for a round plate instead, the RCI 950 Series round push plate carries the handicap symbol and a momentary switch in satin stainless steel. Both are momentary actuators for egress or auto-operator control; the difference is plate geometry and the cut-out it needs, so confirm the existing prep before swapping one for the other.
4) I am installing in an aluminum storefront frame and need a narrow pushbutton - is the DynaLock 6795 the right pick or is there another narrow switch?
The DynaLock 6795 is one of the narrow recessed models in the 6705 family, designed specifically for installation in aluminum store front frames with minimal cut-out or preparation. A comparable narrow-stile option is the Trine 342 narrow style electric door switch. Both are intended for the limited face width of a storefront stile; the 6795 adds the blue engraved handicapped symbol and a DPDT momentary contact set, so choose it when the opening needs the accessibility marking.
5) What should I use instead of the DynaLock 6795 if the application is an emergency exit release rather than an accessible door opener?
The DynaLock 6795 is marked with a blue engraved handicapped symbol, which suits accessible entrance and auto-operator actuation. For an emergency release station, the ACSI 1320-1-MOM-ER pushbutton switch is marked "Emergency Release" and the Securitron EEB emergency exit push button uses interchangeable LED lenses. Those carry the emergency labeling a life-safety release point needs, while the 6795 carries the accessibility symbol.
6) My spec calls for a maintained contact exit button - can the DynaLock 6795 be used?
No. The DynaLock 6795 is a momentary DPDT device, and all momentary models in the family feature "all active" operation, so the contacts transfer only while the plate is pressed. For a maintained device, the RCI 908 Series electronic exit button with red EXIT text is a maintained-operation unit, and the RCI 919 Series rotary release button is also maintained in satin aluminum. Use one of those where the circuit must stay latched after actuation.
7) What does momentary DPDT mean for wiring a door release button?
Double pole, double throw gives you two independent sets of changeover contacts from one press, so you can break power to a mag lock on one pole and signal an operator or alarm shunt on the other. Momentary means the contacts only transfer while the plate is pressed and return on release, which is the normal arrangement for an ADA door actuator. On all DynaLock momentary models the switching is "all active" operation.
8) Is this pushplate durable enough for a high traffic public entrance?
It is a heavy duty egress control machined from solid aluminum, not a stamped or plastic plate, with the handicapped symbol engraved and filled blue rather than printed on. That construction is why it holds up on school, healthcare, and retail entrances where the plate gets struck by carts and wheelchairs. Rated for commercial use.
9) Should I use a recessed narrow pushplate or a surface mounted round push button for a handicap door actuator?
Go recessed like the DynaLock 6795 when the button lands in an aluminum storefront stile or a finished wall where you want the plate flush and the cut-out small. Go round surface mount when you are putting the actuator on a bollard, a column, or a wall where no gang box prep exists. For that round approach ZenSupply carries the RCI 950 Series round push plate with handicap symbol and momentary switch in satin stainless, and the Securitron PB5 medium round illuminated push button if you want the actuator lit.
10) What is a good alternative if I need an emergency exit release rather than an ADA actuator?
The 6795 is a handicapped egress actuator with a blue wheelchair symbol, so it reads as a door opener, not an emergency release. If you need the emergency function, look at the Securitron EEB emergency exit push button with interchangeable LED lenses, the ACSI 1320-1-MOM-ER pushbutton marked "Emergency Release", or the RCI 908 Series electronic exit button with red EXIT text in maintained operation. Maintained versus momentary matters: a maintained button stays latched until reset, which is what most life safety releases want.
11) I am standardizing pushplates across a building with bronze and brass hardware - does the DynaLock 6795 match or do I need a different brand?
The DynaLock 6795 is offered in eight finishes: Bright Brass US3, Satin Brass US4, Light Bronze US10, Dark Bronze US10B, Medium Bronze US13, Black Satin US19, Bright Chrome US26 and Satin Aluminum US28, which is the standard finish. Among the comparable actuators, the RCI 950 round handicap plate is satin stainless steel, the RCI 919 rotary release is satin aluminum and the RCI 909F rocker is beige. For a facility running bronze or brass trim, the 6795 is the one with matching finish coverage.
12) Is a Securitron PB3 or PB5 push button an equivalent substitute for the DynaLock 6795 handicap pushplate?
They are related but not interchangeable. The DynaLock 6795 is a solid aluminum recessed single gang pushplate carrying the blue engraved handicapped symbol. The Securitron PB3 Series is a push button, the Securitron PB5 Series is a medium round illuminated push button, and the Securitron PB4L Series is a stainless push button with an illuminated halo. Those are button-style actuators rather than a symbol-engraved accessible plate, so they suit general release points; if the opening is being marked as an accessible entrance, stay with the 6795.
13) I need key-controlled release rather than a pushplate anyone can press - what is the alternative to the DynaLock 6795?
The DynaLock 6795 is a pushplate egress control, so anyone at the door can actuate it. Where release has to be restricted to authorized staff, the ACSI 1310-1 mortise keyswitch from the 1300 Series requires a key to operate. Property managers often pair the two on one opening: the accessible pushplate for public actuation and a keyswitch for staff-only override.
14) Which option carries a higher contact rating, the DynaLock 6795 or the RCI 909F rocker switch?
The DynaLock 6795 is rated 6 A at 125VAC, as are all non-PTD models in the 6705 family, while PTD contact versions are rated 10 A at 125VAC. The RCI 909 Series flush mount momentary rocker switch is rated 250VAC 10A in a beige finish. If your circuit needs the higher voltage rating, the 909F is the flush rocker to look at; if the install is an accessible entrance in a storefront stile, the 6795 gives you the engraved symbol and the recessed single gang plate.
15) Can I standardize on the 6705 series across a building if some doors need different switching?
Yes. The 6705 and 6805 series share the same solid aluminum plate family and offer multiple switching configurations and finishes, so the 6795 momentary DPDT can sit alongside other switching versions with the same plate appearance across a facility. Keep the finish consistent per entrance group, and note the contact rating changes by configuration: PTD contacts are 10 A at 125VAC while the rest, including this DPDT, are 6 A at 125VAC.
16) Is there a narrow style switch option from another brand for a tight storefront stile?
If the 6795 finish or switching does not suit the job, ZenSupply also carries the Trine 342 narrow style electric door switch and the Securitron PB3 series push buttons. The Trine 342 is the closest narrow style peer for a slim aluminum stile. Note that neither is described with a handicapped symbol, so if the opening needs an ADA actuator marking, the engraved blue symbol on the DynaLock is the reason to stay with it.
How fast can I get the DynaLock 6795 US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DynaLock 6795 US26 come with a warranty?
Absolutely. The DynaLock 6795 US26 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DynaLock 6795 US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the DynaLock 6795 US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.