You may also like
DynaLock 7088 Prewired Rectifier
Model 7088 1 Amp Prewired Rectifier Module .2 Lbs.
Manufacturer Resources
Product Specs
- Subcategory:
- Push Buttons
- Series:
- 7088
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Parts and Accessories
- Product Type:
- Rectifier
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Battery Operated:
- No
- Parts and Accessories Type:
- Installation Accessories
- Product Attribute:
- Parts and Accessories
- Product Category:
- Electronic Access Controls
- Department:
- Door Hardware
DynaLock DYK7088 – Frequently Asked Questions
1) Do I need a rectifier to run a DC magnetic lock off an AC transformer?
That is exactly the job of the DynaLock 7088 rectifier module. AC output from a transformer cannot drive a DC device like a mag lock or an electric strike coil that expects DC, so a rectifier goes between the transformer and the lock to convert it. The 7088 is a commercial-duty module rated at 1 amp, supplied prewired so it lands in the box as an installation accessory rather than a bench-built assembly.
2) Is a 1 amp DynaLock 7088 rectifier enough for the locks on my door?
Add up the DC draw of everything downstream of it. The 7088 is a 1 amp module, so the combined current of the lock or locks it feeds has to sit at or under 1 amp continuous. One single mag lock or strike is normally comfortable inside that; two or more devices, or a high-holding-force lock plus accessories on the same leg, is where you run out of headroom and should feed each opening from its own rectified leg or step up to a higher capacity power supply.
3) Does the DynaLock 7088 rectifier have a battery or provide backup power?
No battery, and no backup function. The 7088 is not battery operated; it is a passive conversion module that needs a live AC source ahead of it. When the power drops, the rectifier output drops with it, and the lock behaves as its fail-safe or fail-secure design dictates. If the opening has to hold through an outage, that comes from a battery-backed power supply upstream, not from this module.
4) What does prewired mean on the DynaLock 7088 rectifier module?
The module ships with its leads already terminated to the board, so the installer is landing pigtails at the AC input and the DC output instead of soldering to bare terminals in the field. It is sold as a single model, 7088, with no options to pick, which keeps the ordering decision to how many you need for the openings you are wiring.
5) Is the DynaLock 7088 rectifier suitable for a house, or is it commercial access control only?
Built and catalogued for commercial work. The 7088 is an electronic access control accessory intended for the AC to DC conversion side of a commercial door hardware install, so it turns up in mag lock and electric strike wiring on office, multi-family common area, and institutional openings rather than in residential smart lock kits, which are self-powered or run on their own low voltage adapters.
How fast can I get the DynaLock DYK7088 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DynaLock DYK7088 come with a warranty?
Absolutely. The DynaLock DYK7088 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DynaLock DYK7088?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the DynaLock DYK7088 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.