DynaLock TJ22 Converts 2022 to 2022-TJ22, Top Jamb Conversion Kits Series

The TJ22 converts a DynaLock 2022 magnetic lock into a 2022-TJ22, which is the top jamb mounted version of the same lock. Top jamb mounting is what you need on an inswing door, where the lock body sits on the frame face at the head rather than on the underside of the stop. The kit is the hardware to make that change in the field, not a lock on its own, so you still need the 2022 maglock itself.

Every kit in DynaLock's Top Jamb Conversion Kit line ships with the Z armature bracket or brackets plus the mounting hardware. Because the TJ22 is a 2000 Series kit, it also includes the L lock conversion bracket that repositions the lock body for top jamb mounting. The magnet and armature themselves come from the lock you are converting.

Top jamb kits are for inswing doors. On an outswing door the maglock mounts directly to the underside of the frame stop with the armature on the door face, so no conversion is needed. Swap the swing to inswing and the lock has to come out onto the frame face with the armature carried on a Z bracket, which is what the TJ22 supplies for a 2022.

No. DynaLock's Top Jamb Conversion Kits cover the 2000, 3000 and 2280 Series, but each kit is matched to a specific lock, and the TJ22 is the one that converts the 2022. For a 3000 Series lock you need the kit listed for that model. Note also that the 3000 Series kits do not include the L lock conversion bracket, which only ships with the 2000 and 2280 kits.

Both are mounting accessories for magnetic locking hardware, but they solve different mounting problems. The DynaLock TJ22 converts a 2022 magnetic lock to a 2022-TJ22 for top jamb mounting on inswing doors, and it ships with the "Z" armature bracket and mounting hardware plus the "L" lock conversion bracket used on 2000 and 2280 Series locks. The Securitron SAM Surface Mount Kit accessories are parts for Securitron's own SAM surface mount installation, so they are matched to Securitron hardware rather than to a DynaLock 2000, 3000 or 2280 Series lock body.

No. The TJ22 is a top jamb conversion kit for inswing doors, converting a DynaLock 2022 to a 2022-TJ22 using a "Z" armature bracket. For a frameless or all-glass door, the applicable accessory family is Securitron Glass Door Accessories, which are Grade 2 parts made for glass door mounting rather than for jamb-mounted armature conversion.

The TJ22 is a bracket kit for a DynaLock 2022 and does not address glass or narrow stile door mounting. Where the armature has no rail to land on, look at a purpose built glass door accessory set instead, such as the Securitron Glass Door Accessories group, which is intended for that application. For a surface mount maglock installation there is also the Securitron SAM Surface Mount Kit accessory range, including the SWB SAM wood bracket for wood frames.

It is a field conversion. The kit contains the L lock conversion bracket, the Z armature bracket and the mounting hardware, so an existing 2022 already on the job can be reconfigured for top jamb mounting without buying a new lock. You will be drilling new frame and door mounting points for the bracket positions.

The TJ22 supplies a "Z" armature bracket and mounting hardware to move a DynaLock 2022 lock to top jamb mounting on an inswing door, but it does not address substrate. For wood framing with a Securitron SAM installation, the Securitron SWB SAM Wood Bracket is the accessory built for that mounting condition.

No, those are electrical signalling kits, not mounting brackets. The TJ22 is an installation accessory that converts a DynaLock 2022 magnetic lock to top jamb mounting on an inswing door. The Command Access REX-KIT-ML is a field installable request to exit kit for ML1-Series mortise locks, and the SCHLBMKIT-ML is a field installable latchbolt monitor switch kit for Schlage L9000 mortise locks with an SPDT configuration. Both add a switch output to a mechanical mortise lock and neither changes how a maglock mounts.

It is a commercial door hardware accessory, part of DynaLock's electronic access control line and sold as an installation accessory for their magnetic locks. Typical use is an access controlled inswing door in an office, school or multi family building where a 2022 maglock has to be frame mounted at the head.

They share the word conversion but not the application. The LCN 8310-3803 is a 3V wireless conversion kit for jamb mount touchless actuators, so it changes how an actuator communicates. The DynaLock TJ22 is a mechanical bracket kit that converts a 2022 magnetic lock to a 2022-TJ22 for top jamb mounting on inswing doors, with the "Z" armature bracket and mounting hardware included.