DynaLock TJ31 Converts 3001 to 3001-TJ31, Top Jamb Conversion Kits Series

The TJ31 converts a DynaLock 3001 maglock into a 3001-TJ31, which is the top jamb mounted version. Instead of mounting the lock on the face of the frame's header for an outswing door, top jamb mounting puts the lock on the underside of the header so it works on an inswing door. The kit includes the "Z" armature bracket and mounting hardware.

No. The TJ31 and the rest of the DynaLock top jamb conversion kits are for inswing doors. If the door swings out toward you and the lock body mounts on the face of the frame stop, the standard 3001 mounting is what you want and no conversion kit is needed.

No, the TJ31 is the kit matched to the 3001. DynaLock's top jamb conversion kits cover the 2000, 3000 and 2280 Series, but each lock takes its own kit. One difference worth knowing: the 2000 and 2280 kits also include an "L" lock conversion bracket, where the 3001 kit supplies the "Z" armature bracket and mounting hardware.

No. The DynaLock TJ31 is a top jamb conversion kit that adapts a 3001 magnetic lock to top jamb mounting on inswing doors, supplying a "Z" armature bracket and mounting hardware. For a glass door opening, look at the Securitron Glass Door Accessories in the Glass Door Series instead, which is the bracketry family intended for glass leaf mounting. The two solve different framing problems and do not substitute for one another.

No. The TJ31 is an installation accessory - a mechanical bracket kit that converts 2000, 3000 and 2280 Series locks to top jamb mounting on inswing doors. It carries no switch. For a request-to-exit contact you would add a switch kit matched to the hardware in the door, such as the Command Access REX-KIT-ML for ML1-Series mortise locks, the CRSREXKIT-ED for Cal-Royal 22/98 and Sargent 80 Series exit devices, or the CYREXKIT-ED for Corbin 5000 and Yale 7000 exit devices. For latchbolt monitoring on a Schlage L9000 mortise lock, the SCHLBMKIT-ML is the corresponding kit.

Mounting hardware is in the box along with the "Z" armature bracket. What the kit does not include is the maglock itself, so you are supplying or already have the DynaLock 3001.

Brand matters with maglock mounting hardware, since brackets are cut to a specific lock body. For Securitron magnetic locks, the SAM Surface Mount Kit accessories and the SWB SAM wood bracket cover surface and wood frame mounting, and the Securitron Glass Door accessories handle all-glass openings. Those are Securitron parts and do not interchange with the DynaLock 3001 that the TJ31 is built for.

The DynaLock TJ31 kit is built for one job: converting a 3001 lock to a 3001-TJ31 for top jamb mounting on an inswing door. If the mounting problem is a surface or wood application, Securitron offers the SAM Surface Mount Kit Accessories and the SWB SAM Wood Bracket, which are the bracket accessories for those conditions. Confirm the lock you are mounting is in the family each accessory supports before ordering.

It does not. The TJ31 conversion kit includes the "Z" armature bracket and mounting hardware for top jamb mounting; power is supplied separately. A transformer such as the Adams Rite 4605, which steps 115 VAC down to 12/24 VAC with a 40 volt-amp output, is the kind of component ordered alongside a conversion kit to energize the lock.

No. The TJ31 is a bracket kit for top jamb mounting of a DynaLock 3001 lock and has no sounder. Audible annunciation comes from a separate device, such as the RCI 914 Series delayed egress sounder with field-selectable volume output up to 102 dB, or the Adams Rite 29-0218 piezo electric horn with multi-voltage compatibility. If tamper protection at the release station is also a concern, the Dortronics 6510/COV anti-tamper alarm cover fits 6500 Series pull stations and 5000 Series push buttons.

Both carry the word conversion but they change different things. The DynaLock TJ31 is a mechanical mounting conversion that adapts a 3001 magnetic lock to top jamb mounting on an inswing door. The LCN 8310-3803 is a 3V wireless conversion kit for jamb mount touchless actuators in the 8310 Series, which changes how an actuator communicates rather than how a lock is bracketed to the frame. Ordering one in place of the other will not solve the opening.

It is a commercial access control accessory, listed as an installation accessory for electronic door hardware. Typical use is on commercial inswing openings running a DynaLock 3001 electromagnetic lock.

No options to pick. The TJ31 ships as a single model with no size, hand or finish selection, so ordering is just a matter of confirming the lock you are converting is a DynaLock 3001.

The DynaLock TJ31 is a commercial installation accessory that solves the physical mounting of a 2000, 3000 or 2280 Series lock at the top jamb of an inswing door. It does not switch, distribute, or transfer power. Relay distribution is handled by a board such as the Locknetics RDB4 with 4 outputs, and moving power from frame to door leaf is handled by a device such as the RCI 9500/9501 Series mortise pin transfer, rated 1.5A at 24VAC with a tamper-resistant design. Those three items are complements on a job, not alternatives.