Eaton E26 Flashing Base Incandescent Stacklight Module
The Eaton E26 Flashing Base is designed for use with incandescent stacklight modules, providing a flashing signal function for machine and industrial status indication. This flashing base is rated 12 Vac/dc and ships complete with lens, diffuser, and lamp, making it a ready-to-install component within the Eaton E26 stacklight series. Backed by UL 508 certification and a CE mark, it's built for reliable performance in industrial control and signaling applications.
Key Features
- Series: Part of the Eaton E26 stacklight module series for consistent system compatibility.
- Base Type: Flashing Base configuration delivers an intermittent flashing signal for enhanced visibility.
- Voltage Rating: 12 Vac/dc for use in low-voltage stacklight and signaling circuits.
- Complete Assembly: Includes lens, diffuser, and lamp for a ready-to-install module.
- Used With: Compatible with incandescent stacklight modules.
- Compact Footprint: Product dimensions of 1 in width, 1 in length/depth, and 1 in height for space-conscious panel and stack assemblies.
Certifications & Compliance
- UL 508 Certified
- CE Marked
Technical Specifications
- Series: E26
- Product Type: Electrical Component
- Department: Electrical
Typical Applications
- Industrial Stacklight and Signal Tower Assemblies
- Machine Status Indication Systems
- Panel-Mounted Warning and Alert Signaling
- Commercial and Industrial Electrical Installations
- Control Room and Production-Line Visual Signaling
Why Eaton?
Eaton's E26 Flashing Base combines a complete lens, diffuser, and lamp assembly with UL 508 certification and CE marking for dependable, code-compliant signal performance. Built for use within the broader E26 stacklight module series, it supports reliable flashing indication for industrial control and safety applications where clear visual signaling matters.
Manufacturer Resources
Product Specs
- Product Width:
- 1 in
- Catalog Notes:
- Includes lens, diffuser and lamp
- Used With:
- Incandescent stacklight modules
- Voltage Rating:
- 12 Vac/dc
- Series:
- E26
- Product Length/Depth:
- 1 in
- Base:
- Flashing
- Compliances:
- CE Marked
- Product Height:
- 1 in
- Product Type:
- Signal Tower Module
- Certifications:
- UL 508
- Department:
- Electrical
- Listing:
- UL 508
- Standards:
- CE Marked
- Product Group:
- Motor Control & Automation
- Product Subgroup:
- Push Buttons & Pilot Devices
- Product Weight:
- 1 lb
- Product Length:
- 1 in
Eaton E26BFV1 – Frequently Asked Questions
1) What voltage does the Eaton E26BFV1 flashing base run on?
The E26 flashing base is rated 12 Vac/dc, so it works on either AC or DC control power at 12 volts. If your tower is fed from a 24 V or 120 V control circuit, this base is the wrong part for that stack, since the rating is single-voltage at 12 V.
2) Do I need to buy a lamp and lens separately for the Eaton E26 flashing base?
No. The E26 flashing base ships with the lens, diffuser and lamp included, so it goes onto the stack as a complete module with nothing else to source for the light itself.
3) Will this base work with LED stacklight modules?
It is specified for use with incandescent stacklight modules. If your tower is built from LED modules, this flashing base is not the matching part for it.
4) What is the difference between a flashing base and a steady base on an E26 stacklight?
The base is what drives the lamp above it. This one is the flashing type, so the module it feeds pulses on and off rather than burning steady. Use flashing where you need the signal to pull attention on a machine fault or alarm state, and a steady base where the light just reports a running or ready condition.
5) Is the Eaton E26 flashing base UL listed for industrial control panels?
It carries UL 508 certification and a CE mark. UL 508 is the industrial control equipment standard, which is what a panel builder or plant electrician is normally asked to show on signaling components.
6) Can I mix this base into an existing Eaton stacklight tower?
It is part of the Eaton E26 stacklight series, so it stacks with other E26 modules. Keep the circuit at 12 Vac/dc and the modules incandescent, and it drops into the existing tower without changing the rest of the assembly.
7) How much room does the E26 flashing base take up in a stack?
It is a compact 1 in by 1 in by 1 in component, so it adds very little height to a signal tower assembly and fits tight panel-top mounting.
8) What part number do I order for the Eaton 12 V flashing stacklight base?
Order Eaton E26BFV1. That is the flashing base in the E26 series, rated 12 Vac/dc and supplied with lens, diffuser and lamp.
How fast can I get the Eaton E26BFV1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton E26BFV1 come with a warranty?
Absolutely. The Eaton E26BFV1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton E26BFV1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Eaton E26BFV1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.