Eaton 10250T Series Push-Pull ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$595.07
Eaton 10250T Series Push-Pull Emergency Stop Control Station

Eaton 10250T Series Push-Pull Emergency Stop Control Station

(No reviews yet) Write a Review

Model: 10250T5B62-S101

In Stock (leaves warehouse same day if ordered before 3pm ET)

$595.07
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Eaton 10250T Series Push-Pull Emergency Stop Control Station

The Eaton 10250T Series Push-Pull Emergency Stop Control Station is a pre-assembled control station built for reliable machine safety shutdown in demanding environments. Housed in an ASA 61 gray die cast zinc enclosure rated NEMA 4X, this station pairs a push/pull emergency stop operator with a 1 NO-1 NC contact configuration for clear, positive-action shutdown. It is UL Listed and RoHS Compliant, making it a dependable choice for industrial control panels, machine guarding, and process line safety circuits. Select the model and inscription that match your application from the available variants, including standard emergency stop, HVAC shutdown, generator stop, boiler shutdown, fuel shutoff, gas shutoff, and power-off configurations.

Key Features

  • Compact Footprint: Measures 3.88 in wide x 3 in deep x 4 in high, sized for convenient mounting at machine control points.
  • Durable Construction: ASA 61 gray die cast zinc enclosure provides rugged protection for the internal contact block and operator mechanism.
  • Push/Pull Operator: Emergency stop type operator with a gray actuator color, designed for immediate, positive-action shutdown.
  • Contact Configuration: 1 NO-1 NC contact arrangement supports standard emergency stop wiring schemes.
  • Degree of Protection: NEMA 4X rating supports use in washdown, corrosive, and outdoor-exposed industrial locations.
  • Finish: Gray actuator and enclosure finish for consistent visual identification across control panels.
  • Series: Part of the Eaton 10250T Series, available across multiple inscription and application variants.

Certifications & Compliance

  • UL Listed
  • RoHS Compliant
  • NEMA 4X Rated Enclosure

Technical Specifications

  • Product Type: Electrical Component
  • Series: 10250T
  • Product Width: 3.88 in
  • Product Length/Depth: 3 in
  • Product Height: 4 in
  • Contact Configuration: 1 NO-1 NC
  • Enclosure: ASA 61 gray die cast zinc
  • Actuator Color: Gray
  • Warranty: 1 year

Typical Applications

  • Industrial Machine Safety Circuits
  • Emergency Stop Wiring on Control Panels
  • Process Line and Conveyor Shutdown Stations
  • Washdown and Corrosive Industrial Environments
  • OEM Equipment Control Enclosures

Why Eaton?

Eaton's pre-assembled emergency stop control stations combine a rugged zinc die cast enclosure, NEMA 4X protection, and UL Listed, RoHS Compliant construction to deliver dependable, code-compliant safety performance. The push/pull operator and 1 NO-1 NC contact configuration give electricians and machine builders a proven, ready-to-install solution for critical stop functions across industrial facilities, with multiple inscription variants available to match specific shutdown applications.

Manufacturer Resources

Product Specs

Product Type:
Control Station
Product Material:
Zinc Die-Cast
Product Color:
Gray
Series:
10250T
Listing:
UL Listed
Standards:
NEMA 4X
Department:
Electrical
Product Group:
Motor Control & Automation
Product Subgroup:
Push Buttons & Pilot Devices

Eaton 10250T5B62-S101 – Frequently Asked Questions

1) What does the Eaton 10250T5B62 emergency stop station come with, or do I have to order the operator and contact block separately?
It ships pre-assembled. The 10250T5B62 comes as a complete station: push/pull emergency stop operator, a 1 NO-1 NC contact block, and the die-cast zinc enclosure, all in one part number. You wire it and mount it. There is no separate operator, contact block, or enclosure to source, which is the main reason machine builders spec the assembled station over building one up from loose 10250T components.
2) Can an Eaton 10250T push-pull stop station be mounted outdoors or in a washdown area?
Yes. The enclosure carries a NEMA 4X rating, so it stands up to hosedown, corrosive atmospheres, and outdoor exposure. The shell is ASA 61 gray die-cast zinc rather than plastic, which is what holds up on a wash-down food line or an exterior generator pad. For a dry indoor panel-mount application you are paying for protection you will not use, but there is no functional penalty to running 4X everywhere.
3) Which inscription should I order on the Eaton 10250T5B62 emergency stop station?
Pick the legend that matches the circuit the button kills, because the inscription is molded into the order code and cannot be changed later. The choices are: standard Emergency Stop (10250T5B62-S101), Emergency Shut-Off (-S102), Emergency HVAC Shut Down (-S104), Emergency Generator Stop (-S105), Emergency Boiler Shut Down (-S106), Emergency Fuel Shut Off (-S108), Emergency Power Off (-S110), Emergency Gas Shut Off (-S111), and Emergency Shut Off (-S112). Mechanically and electrically they are the same station, so the decision is purely about what the person hitting it in an emergency needs to read.
4) Will a 1 NO-1 NC contact block handle a normal E-stop wiring scheme?
For a standard single-channel stop circuit, yes. The normally closed contact goes in series with the control circuit so pulling power opens it, and the spare normally open contact is there for a status light, a PLC input, or an annunciator telling you which station was hit. If your safety relay needs dual-channel redundancy, two NC contacts, that is more than this 1 NO-1 NC arrangement gives you and you need a two-NC configuration instead.
5) Does a gray actuator meet the usual red-on-yellow emergency stop convention?
No, and this is worth catching before you order. The 10250T5B62 has a gray actuator and a gray enclosure. If your facility or an inspector requires the red mushroom head on a yellow background for emergency stop identification, this configuration does not give you that on its own. Gray is fine where the station is a functional shutdown, a fuel or gas shutoff, or an equipment stop that is not serving as the operator-facing emergency stop of a machine, or where you are adding your own identification placard behind it.
6) How much room do I need to mount an Eaton 10250T emergency stop station on a machine?
The station measures 3.88 in wide x 3 in deep x 4 in high. That is small enough to land on a conveyor upright, a column, or the side of an OEM control enclosure without stealing panel face. Allow clearance in front of it for the mushroom head to be pulled back out after a trip.
7) What is the difference between a push-pull emergency stop and a twist-to-release button?
Push-pull means you strike the head to stop the machine and pull it straight back out to reset. There is no twisting and no key. It is the fastest reset for a station an operator resets themselves, which is why it is the common choice on conveyors and process lines. Twist-release and key-release versions exist for situations where you want a deliberate, slower, or supervised reset. The Eaton 10250T5B62 is the push/pull type.
8) Can I use the Eaton 10250T station as a remote boiler or fuel shutoff outside a mechanical room?
That is what the -S106 Emergency Boiler Shut Down, -S108 Emergency Fuel Shut Off, and -S111 Emergency Gas Shut Off inscriptions are for. The NEMA 4X zinc enclosure handles a corridor, an exterior wall, or a boiler room wall where a plastic station would not last. Wire the NC contact into the burner or valve control circuit so the button opens it, and use the spare NO contact if you want a remote indication that the shutoff has been tripped.
9) If I standardize on the Eaton 10250T5B62 across a plant, are all the inscription versions the same size and mounting?
Same station throughout. Every inscription, from S101 through S112, is the same 3.88 x 3 x 4 inch zinc die-cast NEMA 4X body with the same push/pull operator and the same 1 NO-1 NC block. Only the legend changes. That means one spare on the shelf covers the mechanical side of every station in the building, and swapping an HVAC shutdown for a generator stop is a like-for-like replacement in the same footprint.
How fast can I get the Eaton 10250T5B62-S101 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton 10250T5B62-S101 come with a warranty?
Absolutely. The Eaton 10250T5B62-S101 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton 10250T5B62-S101?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Eaton 10250T5B62-S101 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!