Eaton 3032B Arrow Hart industr...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$86.71
$21.99
Image coming soon

Eaton 3032B Arrow Hart industrial grade toggle switch, #14-10 AWG, 30A, Flush, 120/277V, Back and side, Screw, Brown, Load type:Motor Control, Fan,LE

(No reviews yet) Write a Review

Model: 3032B

In Stock (leaves warehouse same day if ordered before 3pm ET)

$86.71
$21.99
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Eaton Arrow Hart industrial grade toggle switch, #14-10 AWG, 30A, Flush, 120/277V, Back and side, Screw, Brown, Load type:Motor Control, Fan,LED, Incandescent,ELV, MLV, CFL, Flourescent, Halogen, Double-Pole, Dual-pole, Brass, Polycarbonate

Manufacturer Resources

Product Specs

Allowable Wire Size:
#14-10 AWG
Amperage Rating:
30A
Application:
Industrial
Certifications:
cULus Listed
Compliances:
NAFTA
Connector Type:
Screw
Load Type:
Motor Control, Fan, LED, Incandescent, ELV, MLV, CFL, Flourescent, Halogen
Number Of Poles:
Two-pole
Product Height:
4.19 IN
Product Length Depth:
1.3 IN
Product Weight:
.16 LB
Product Width:
1.005 IN
Terminal Enclosure Material T:
Brass
Voltage Rating:
120/277V
Wiring Method:
Back and side
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Toggle Switches
Product Type:
Double-Pole Toggle Switch
Product Details:
Toggle switch
Product Color:
Brown
Installation Category:
Flush
Switch Classification:
Dual-pole
Product Material:
Polycarbonate

Eaton 3032B – Frequently Asked Questions

1) Can the Eaton 3032B toggle switch be used to disconnect a 240V or 277V motor?
The Eaton Arrow Hart 3032B is a two-pole switch rated 30A at 120/277V, so it breaks both ungrounded conductors of a 120/240V or 277V single-phase circuit. Motor control is one of its listed load types, along with fans, LED, incandescent, ELV, MLV, CFL, fluorescent and halogen. Two-pole construction is what lets it serve as a manual motor switch rather than a simple lighting switch.
2) What wire size will the 3032B 30 amp switch terminals accept?
Terminals on the 3032B take #14 through #10 AWG copper, which covers the #10 you would typically pull for a 30A branch circuit. Connections are screw type, and the switch is set up for both back and side wiring, so you can land conductors straight in the back or wrap them on the side screws in a crowded box. Terminal enclosure is brass.
3) Is a 30A two-pole toggle switch like the 3032B heavy enough for a plant or shop, or should I use a spec grade 20A device?
This one is built for the industrial end of the range: industrial grade application, 30A, two-pole, polycarbonate body with brass terminal enclosure. If you are only switching a 15A or 20A lighting branch, a standard 20A spec grade switch is the cheaper and more common choice. Go to the 30A two-pole device when you need to break both legs of a 240V load or provide a local motor or fan disconnect at the equipment.
4) Will the Eaton 3032B fit a standard single-gang wall plate and box?
It is a flush mount device measuring 4.19 x 1.005 x 1.3 inches, which is standard single-gang strap-mount geometry, so it mounts to a normal box and takes a standard toggle wall plate. Note the 1.3 inch depth behind the strap when you are working in a shallow box with #10 conductors already filling it.
5) Can the 3032B switch dimmable LED or fluorescent fixtures?
It will switch them, not dim them. The 3032B is a toggle on/off switch, and its listed load types include LED, CFL, fluorescent, halogen, incandescent, ELV and MLV. For dimming those loads you need a dimmer matched to the driver or ballast type, not a toggle switch.
6) Will a brown 3032B switch match the other devices in my building?
The 3032B is brown, which matches older commercial and industrial device sets but will not blend with ivory, white, or gray plates. If you are standardizing a facility on one color, check what is already on the adjacent openings before ordering a run of them, since the switch color is fixed on this model number.
How fast can I get the Eaton 3032B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton 3032B come with a warranty?
Absolutely. The Eaton 3032B is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton 3032B?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Eaton 3032B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.