You may also like
Eaton B-Line series 4Dimension strut pipe clamps and fittings
Manufacturer Resources
Product Specs
- Beam Flange Width:
- .25 IN
- Beam Thickness:
- .75 IN
- Certifications:
- cULus Listed
- Product Height:
- 4.16 IN
- Product Length Depth:
- 6.03 IN
- Product Weight:
- 1.16 LB
- Product Width:
- 1.07 IN
- Special Features:
- Includes pre-assambled hardware
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Universal beam clamp
- Product Details:
- Universal beam clamp
- Product Material:
- Steel
- Product Length:
- 6.03 in
B-LINE 4D441-22ASS4 – Frequently Asked Questions
1) What size beam flange does the B-Line 4D441-22ASS4 beam clamp fit?
The 4D441-22ASS4 universal beam clamp is set up for a beam flange width of .25 in and a beam thickness of .75 in. Measure the flange on your steel before ordering, since a clamp sized outside that range will not seat properly on the flange edge.
2) Is the Eaton B-Line 4Dimension 4D441-22ASS4 clamp UL listed for electrical support work?
It is cULus Listed, so it carries both the US and Canadian listing marks. That is the line an inspector or a facility electrical spec usually wants to see on strut and beam support hardware.
3) Do I need to buy separate bolts and nuts for the 4D441-22ASS4 beam clamp?
No. The 4Dimension beam clamp ships with pre-assembled hardware, so the bolt and nut come attached and you are not sourcing loose fasteners on the lift. Anything beyond that, such as the strut channel, threaded rod, or pipe clamp it ties into, is ordered separately.
4) How much space does the B-Line 4D441-22ASS4 clamp take up around the beam?
Plan on a footprint of 6.03 in length/depth, 4.16 in height, and 1.07 in width. That height matters most in tight plenums and above ceiling grid, where the body plus the pipe or strut below it has to clear the tile line.
5) Why use a beam clamp instead of drilling or welding to the structural steel?
A beam clamp like the 4D441-22ASS4 grips the flange mechanically, so nothing gets drilled, burned, or welded into the structure. On tenant fit-outs and retrofits where the building owner will not allow penetrations in the steel, that is usually the only acceptable way to hang conduit, pipe, or strut. It comes with the hardware pre-assembled, so it goes up in one pass overhead.
6) Is the 4Dimension 4D441-22ASS4 beam clamp steel or stainless?
The clamp body is steel. For wet, washdown, or corrosive environments, check that the material and finish suit the exposure before committing it to a coastal or process area.
7) How heavy is a single B-Line 4D441-22ASS4 clamp for takeoff purposes?
Each clamp weighs 1.16 lb. Useful when you are counting several hundred hangers on a run and need the dead load on the structure, or estimating what a crew carries up per lift.
How fast can I get the B-LINE 4D441-22ASS4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4D441-22ASS4 come with a warranty?
Absolutely. The B-LINE 4D441-22ASS4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4D441-22ASS4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4D441-22ASS4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.