You may also like
Eaton B-Line series 4Dimension strut pipe clamps and fittings
Manufacturer Resources
Product Specs
- Beam Flange Width:
- .25 IN
- Beam Thickness:
- .75 IN
- Certifications:
- cULus Listed
- Product Height:
- 4.16 IN
- Product Length Depth:
- 4.15 IN
- Product Weight:
- 1.07 LB
- Product Width:
- 1.16 IN
- Special Features:
- Includes pre-assambled hardware
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Universal beam clamp
- Product Details:
- Universal beam clamp
- Product Material:
- Steel
B-LINE 4D441-22ZN – Frequently Asked Questions
1) What beam size does the B-Line 4D441-22ZN universal beam clamp fit?
The 4D441-22ZN is sized by two numbers on its spec: a beam flange width of .25 in and a beam thickness of .75 in. Measure the flange on your steel at the point you intend to clamp and match those figures before you order, because a universal beam clamp only grips within its rated flange range.
2) Do I need to buy separate nuts and bolts for the 4D441-22ZN beam clamp?
No extra fasteners to source. The 4D441-22ZN ships with pre-assembled hardware, so the clamp comes out of the box ready to set on the beam and tighten.
3) Is the Eaton B-Line 4D441-22ZN listed for electrical support work?
It carries a cULus Listing, which is what an inspector on a commercial or institutional job will look for when strut and pipe supports are part of the electrical rough-in.
4) How much clearance do I need around a 4D441-22ZN beam clamp?
Plan for a footprint of 4.16 x 4.15 x 1.16 inches on the 4D441-22ZN. That is worth checking where beams are tight to deck or where you are running a row of clamps at close centers.
5) What is the Eaton B-Line 4D441-22ZN made of, and will it hold up in a parking garage or mechanical room?
Steel construction, weighing 1.07 lb per clamp. The ZN in the part number indicates a zinc-plated finish, which suits dry interior mechanical rooms and covered areas; for open exterior or corrosive environments, specify a hot-dip galvanized or stainless beam clamp instead.
6) Can I hang strut channel from the 4D441-22ZN, or is it only for pipe?
It is part of the Eaton B-Line 4Dimension strut pipe clamp and fitting family, and it is built as a universal beam clamp, so it is the attachment point to the structural steel. Strut, threaded rod, or pipe hangers connect through it using the supplied hardware.
7) What part number do I give my distributor for this Eaton beam clamp?
Order it as Eaton B-Line 4D441-22ZN. That single model covers the whole item, so there is no finish or size suffix to specify separately.
How fast can I get the B-LINE 4D441-22ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4D441-22ZN come with a warranty?
Absolutely. The B-LINE 4D441-22ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4D441-22ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4D441-22ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.