Eaton B-Line series fastener hardware and accessories, Designed for use with lightweight fixtures, Plastic ,12" x 1", Recommended for use in concrete, block and brick,Plastic conical anchor
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Product Diameter:
- .125 in
- Product Height:
- 1 in
- Product Weight:
- 1.4 lb
- Special Features:
- Recommended for use in concrete, block and brick
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Anchors
- Product Type:
- Plastic conical anchor
- Product Details:
- Plastic conical anchor
- Product Material:
- Plastic
- Application:
- Designed for use with lightweight fixtures
B-LINE APC-12K – Frequently Asked Questions
1) What base material can the B-Line APC-12K plastic anchor be used in?
The APC-12K conical anchor is recommended for concrete, block and brick. Those are solid masonry bases where the plastic sleeve can expand against the hole wall as the screw drives in. It is not a hollow-wall anchor, so for drywall or hollow block webs you want a toggle or self-drilling drywall anchor instead.
2) How much load will the B-Line APC-12K anchor hold, and what should I hang off it?
It is specified for lightweight fixtures only. An electrical contractor uses this size of conical anchor for things like small device boxes, low-voltage brackets, conduit straps and signage on masonry. For pipe hangers, strut, or anything carrying real weight or vibration, step up to a steel expansion or screw anchor.
3) What size hole do I drill for the B-Line APC-12K conical anchor?
The anchor itself is listed at .125 in diameter and 1 in height, so it seats in a 1 inch deep hole drilled to match the anchor body. Drill with a masonry bit, blow the dust out, and set the anchor flush before driving the screw so the cone expands inside the hole rather than backing out.
4) Is the B-Line APC-12K anchor UL Listed for electrical work?
Yes, the APC-12K carries a UL Listing, which is what an institutional or MRO spec usually wants to see on fastening hardware going into an electrical installation.
5) Does the B-Line APC-12K come with screws?
What ships is the plastic conical anchor itself, model APC-12K. Screws are a separate line item, so order the sized screws for your fixture along with the anchors or the job stops at the wall.
6) Will a plastic anchor like the APC-12K corrode in a damp mechanical room or exterior wall?
The body is plastic, so there is nothing in the anchor itself to rust the way a zinc or steel anchor will. Corrosion resistance then comes down to the screw you pair with it, so use a stainless or coated screw in damp locations.
7) Are the APC-12K anchors sold loose or as a bulk pack?
They come as a quantity pack rather than a single anchor. The pack is listed at 1.4 lb, which for a .125 in by 1 in plastic anchor is a bulk count, so one order typically covers a whole run of fixtures rather than a single mounting point.
How fast can I get the B-LINE APC-12K delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE APC-12K come with a warranty?
Absolutely. The B-LINE APC-12K is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE APC-12K?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE APC-12K from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.