B-Line Eaton series fastener hardware and accessories, Heavy and medium duty all purpose anchor, Stainless steel type 304 ,5⁄8" x 5", Anchors can be i

Yes. The AWA-62-500SS4 is designed to be installed through the fixture, so you can position the bracket, mark and drill through its holes, then drive the anchor without moving the part. That is the usual sequence for strut channel, pipe supports and equipment bases where the hole pattern is already fixed.

Type 304 stainless steel is the material here, which is what you want for exterior mounting, parking structures, wash-down areas and other damp locations where a plated carbon steel anchor would rust and stain the concrete. For chloride-heavy conditions, coastal spray or pool chemistry, 316 is the grade normally specified instead of 304.

The AWA-62-500SS4 wedge anchor carries a UL Listed marking, which is what inspectors look for when the anchor is carrying conduit racks, cable tray, light fixtures or other electrical support in a commercial building.

A wedge anchor like this 5/8 x 5 inch B-Line is the choice for solid, poured concrete under medium to heavy load, and it is a one-time set (the wedge expands and it does not come back out). Sleeve anchors and screw anchors are what you move to for block, brick or hollow base material, or when you want something removable. Use the wedge anchor where the base is solid concrete and the load is real.