B-Line Eaton series fastener hardware and accessories, Heavy and medium duty all purpose anchor, Stainless steel type 304 ,5⁄8" x 6", Anchors can be i

Yes. The AWA-62-600SS4 is designed to be installed through the fixture, so you can set the bracket or base plate in place, drill through its hole into the concrete, and drive the anchor without repositioning. That saves layout time on large equipment bases and keeps the hole aligned with the fixture.

The AWA-62-600SS4 is made of type 304 stainless steel, which is the usual choice for exterior, damp, and washdown areas where a zinc-plated carbon steel anchor would rust. For chloride-heavy environments such as coastal splash zones or pool chemical rooms, type 316 is the stainless grade normally specified instead.

A wedge anchor like this 5/8 x 6 inch B-Line unit is for solid, poured concrete only. It expands a small clip at the tip, so it needs sound base material and develops high hold in concrete. If you are fastening into hollow block, brick, or grout-filled CMU, a sleeve anchor or a screw anchor is the better choice, because a wedge anchor can spall or spin in those materials.

Yes, the anchor carries a UL Listing. That matters on electrical and fire-protection work where the inspector wants listed attachment hardware for supporting raceway, cable tray, or strut.