You may also like
B-Line Eaton series fastener hardware and accessories, Light to medium duty anchor for use in concrete,1⁄4" x 2-3⁄4", Thread design for greater stabil
Model: BLN-ACS-25-275H
Eaton B-Line series fastener hardware and accessories, Light to medium duty anchor for use in concrete,1⁄4" x 2-3⁄4", Thread design for greater stability and grip,Hex head concrete screw
B-LINE
$146.60
$114.69
B-Line Eaton series fastener hardware and accessories, Light to medium duty anchor for use in concrete,1⁄4" x 3-3⁄4", Thread design for greater stabil
Model: BLN-ACS-25-375H
Eaton B-Line series fastener hardware and accessories, Light to medium duty anchor for use in concrete,1⁄4" x 3-3⁄4", Thread design for greater stability and grip,Hex head concrete screw
B-LINE
$200.71
$178.78
B-Line Eaton series fastener hardware and accessories, Light to medium duty anchor for use in concrete,1⁄4" x 1-1⁄4", Thread design for greater stabil
Model: BLN-ACS-25-125H
Eaton B-Line series fastener hardware and accessories, Light to medium duty anchor for use in concrete,1⁄4" x 1-1⁄4", Thread design for greater stability and grip,Hex head concrete screw
B-LINE
$120.06
$82.64
B-Line Eaton series fastener hardware and accessories, Light to medium duty anchor for use in concrete,1⁄4" x 2-1⁄4", Thread design for greater stabil
Model: BLN-ACS-25-225H
Eaton B-Line series fastener hardware and accessories, Light to medium duty anchor for use in concrete,1⁄4" x 2-1⁄4", Thread design for greater stability and grip,Hex head concrete screw
B-LINE
$138.36
$104.56
B-Line Eaton series fastener hardware and accessories, Light to medium duty anchor for use in concrete,1⁄4" x 3-1⁄4", Thread design for greater stabil
Model: BLN-ACS-25-325H
Eaton B-Line series fastener hardware and accessories, Light to medium duty anchor for use in concrete,1⁄4" x 3-1⁄4", Thread design for greater stability and grip,Hex head concrete screw
B-LINE
$176.84
$150.10
Eaton B-Line series fastener hardware and accessories, Light to medium duty anchor for use in concrete,1⁄4" x 1-3⁄4", Thread design for greater stability and grip,Hex head concrete screw
Manufacturer Resources
Product Specs
- Application:
- Light to medium duty anchor for use in concrete
- Certifications:
- UL Listed
- Product Diameter:
- .1875 in
- Product Height:
- 1.75 in
- Product Weight:
- .009 lb
- Special Features:
- Thread design for greater stability and grip
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- Hex head concrete screw
- Product Details:
- Hex head concrete screw
B-LINE ACS-25-175H – Frequently Asked Questions
1) What is the B-Line ACS-25-175H concrete screw used for?
It is a hex head concrete screw for light to medium duty anchoring into concrete, typically holding electrical supports, straps, clamps and small brackets to a slab, wall or overhead deck. The thread form is cut for added stability and grip in the hole. For heavy structural loads or overhead seismic bracing, step up to a mechanical wedge or undercut anchor instead.
2) Do I need an anchor shield or plug with this B-Line concrete screw?
No. A hex head concrete screw taps its own threads into a drilled hole in the concrete, so there is no sleeve, shield or plastic plug to set first. Drill, blow the hole clean, drive the screw with a nut driver on the hex head. That also means it can be backed out and the fixture removed without leaving an expansion sleeve behind.
3) Is the ACS-25-175H acceptable for a UL listed electrical installation?
The anchor is UL Listed, which is what an inspector or a spec writer on an electrical job normally wants to see for support hardware. It is catalogued on the electrical side of the B-Line line, so it is intended for conduit, strut and box support work rather than general construction fastening.
4) Why is a hex head better than a flat head for anchoring conduit straps to concrete?
The hex head drives with a socket or nut driver instead of a bit that can cam out, which matters when you are overhead on a ladder running a line of one hole straps. It also seats flat on the strap and gives a broader bearing surface, so the strap is not pulled into a countersink it was never formed for. Use a flat or countersunk head only where the fixture is dimpled for it.
5) What part number do I order for this B-Line light duty concrete anchor?
Order Eaton B-Line part ACS-25-175H. It is a single configuration, so there is no finish or head option to specify, and each screw weighs .009 lb if you are working out shipping on a bulk count.
How fast can I get the B-LINE ACS-25-175H delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE ACS-25-175H come with a warranty?
Absolutely. The B-LINE ACS-25-175H is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE ACS-25-175H?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE ACS-25-175H from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.