B-Line Eaton series fiberglass enclosures, Smooth brushed, Aluminum, Fiberglass enclosures, Fits 36" X 30" enclosures, Fiberglass accessories

The AWF3630AP aluminum flat panel is sized for Eaton B-Line fiberglass enclosures with a 36 inch by 30 inch body. The panel itself measures 33 in height, 27 in width and 27 in length/depth, so it sits inside the enclosure on the mounting studs rather than matching the outside dimensions. If your enclosure is a different size, you need the panel cut for that size instead.

Back panels are ordered separately from the enclosure. The AWF3630AP is the flat aluminum mounting panel for a 36 x 30 Eaton B-Line fiberglass enclosure, and it ships as the panel only. Budget for it as a line item whenever you quote the enclosure, along with any DIN rail, standoffs or terminal blocks you plan to mount to it.

Aluminum, with a smooth brushed finish. That matters in two ways on a job: it is non-magnetic and it will not rust in a wet or washdown location the way a painted steel panel can once the coating is nicked. Aluminum panels are also conductive, so if you are using the panel as a bonding surface plan your grounding accordingly.

UL Listed, yes. For spec work on government, healthcare or industrial jobs where the panel schedule calls for listed components inside the enclosure, the AWF3630AP flat panel carries that listing.

That is what it is for. The AWF3630AP is a blank flat panel, no pre-punched pattern, so you lay out and drill for your contactors, breakers, DIN rail or terminal strips. With 33 by 27 inches of usable face on an aluminum plate, tapping for machine screws is straightforward on the bench before the panel goes into the enclosure.

Order it as Eaton B-Line AWF3630AP. The AWF prefix is the aluminum flat panel line and 3630 refers to the 36 x 30 enclosure it suits, so an adjacent number in that series is sized for a different enclosure, not a different finish.