B-Line AF7230SWP Eaton series free standing enclosure accessories, NEMA 12, Used to hinge panels on left or right side, Steel, Full and half swing panel, Channel mount, Free-standing enclosure accessories

The AF7230SWP swing panel measures 59.87 inches high by 24.75 inches wide, with a stated length/depth figure of 59.87 inches. It weighs 64.713 lb, so plan on two people (or a lift) to hang it inside a free-standing enclosure.

Either side. The AF7230SWP is made to hinge panels on the left or the right, so you set the swing direction to suit how the enclosure door opens and where you need working clearance. No separate handed part number to order.

Yes. The AF7230SWP is rated to NEMA 12, the dust and dripping-liquid rating used for indoor industrial control enclosures, and it carries CSA C22.2 certification for Canadian jobs.

It is a channel-mount swing panel for Eaton B-Line free-standing enclosures. It hangs off the enclosure's mounting channels rather than bolting to the back pan, which is what lets it swing out and gives you access to wiring behind it.

It is catalogued as a full and half swing panel, so it covers both arrangements. A full swing panel spans the enclosure opening and carries components on the front face while leaving the back pan reachable behind it; a half swing covers part of the opening so you can mount to the rear pan alongside it. Pick based on how much rear-pan real estate you still need.

Order it as B-Line AF7230SWP, an Eaton B-Line series free-standing enclosure accessory. That MPN covers the panel as a single configuration, no suffix or handing code to add.

Steel construction, and at 64.713 lb it is a substantial panel meant to be loaded with terminal blocks, relays, and other panel-mounted gear. Steel also means it can be drilled and tapped in the field for your component layout.