B-Line AF6036HP Eaton series f...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,477.45
B-Line AF6036HP Eaton series free standing enclosure accessories, NEMA 4X rated, Brushed, Used to mount panels in upper or lower sections, Steel, Full and half panel, Half panel mounting, Free-standing enclosure accessories, 12 gauge

B-Line AF6036HP Eaton series free standing enclosure accessories, NEMA 4X rated, Brushed, Used to mount panels in upper or lower sections, Steel, Full and half panel, Half panel mounting, Free-standing enclosure accessories, 12 gauge

(No reviews yet) Write a Review

Model: AF6036HP
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,477.45
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series free standing enclosure accessories, NEMA 4X rated, Brushed, Used to mount panels in upper or lower sections, Steel, Full and half panel, Half panel mounting, Free-standing enclosure accessories, 12 gauge

Manufacturer Resources

Product Specs

Application:
Used to mount panels in upper or lower sections
Certifications:
NEMA
Degree Of Protection:
NEMA 4X
Finish Color:
Brushed
Product Category:
Free-standing enclosure accessories
Product Height:
24.75 in
Product Length Depth:
24.75 in
Product Weight:
40 lb
Product Width:
31.87 in
Department:
Electrical
Product Group:
Panels & Plates
Product Subgroup:
Panel Accessories
Product Type:
Full and half panel
Product Details:
Full and half panel
Product Material:
Steel

B-LINE AF6036HP – Frequently Asked Questions

1) What is the B-Line AF6036HP half panel used for in a free-standing enclosure?
The AF6036HP is a steel half panel for Eaton B-Line free-standing enclosures. It mounts inside the enclosure, in either the upper or lower section, to give you a flat surface to bolt your components, terminal blocks, drives or subassemblies to. Because it's a half panel rather than a full-height back panel, you can run two of them in one cabinet and split the layout between power up top and control below, or leave one section open for cable management.
2) What size is the AF6036HP panel, and will it fit my enclosure?
Dimensions on the AF6036HP are 31.87 x 24.75 x 24.75 inches as published. Panels for free-standing enclosures are sized to the cabinet frame they bolt into, so match the panel to the enclosure's nominal size before ordering rather than measuring the inside of the door opening. It is a half panel, so it covers roughly half the mounting height of the cabinet it is built for.
3) Does the NEMA 4X rating on the AF6036HP mean the panel itself is washdown rated?
The AF6036HP is listed as NEMA 4X rated as part of the free-standing enclosure system it mounts into. The sealing that keeps water and corrosives out is done by the enclosure body, door gasket and latches, not by an interior mounting panel. What the rating tells you is that this panel belongs to a 4X enclosure line, so it is the correct accessory for a washdown or corrosive-duty cabinet.
4) Is the AF6036HP heavy enough to need two people or a lift to install?
At 40 lb it is a two-person lift in practice. A steel panel this size is awkward to hold square against the mounting studs while you start the hardware, so plan on a helper or a panel lift, especially when setting it into the upper section of a free-standing cabinet.
5) How thick is the steel on this B-Line half panel?
It is 12 gauge steel. That thickness holds threads for self-tapping or PEM-style fasteners and carries the weight of contactors, breakers and small drives without flexing, which is why panel shops drill and tap it directly rather than adding a subplate.
6) Should I order a half panel or a full panel for my free-standing cabinet?
Go with a full panel when you want one continuous mounting surface for a single large layout or a tall drive. Choose the AF6036HP half panel when you are splitting the cabinet, mounting in only the upper or lower section, or want to be able to handle and set the plate without a lift. B-Line covers both in this accessory family, and two half panels can occupy the space one full panel would.
7) What finish does the AF6036HP come in, and can I paint over it?
The finish is brushed. There is no painted or powder-coated topcoat called out, so if your spec calls for a white or gray panel for contrast against wiring, this is not that panel. A brushed steel panel is what you want when the drawing specifies a bare or unfinished mounting plate.
8) What is the exact part number to order this Eaton B-Line half panel?
Order it as B-Line AF6036HP. That is the manufacturer part number for the 12 gauge steel half panel in the Eaton B-Line free-standing enclosure accessory line.
How fast can I get the B-LINE AF6036HP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE AF6036HP come with a warranty?
Absolutely. The B-LINE AF6036HP is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE AF6036HP?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE AF6036HP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!